Coatings, Surfaces and Passive Films

Tuesday, 7 October 2014: 08:00-11:40
Expo Center, 1st Floor, Universal 15 (Moon Palace Resort)
Chair:
John N. Harb
08:00
706
New Superhydrophobic Coatings for  Protection Against Corrosion
A. M. Abdullah (Center for Advanced Materials, Qatar University, Doha 2713, Qatar, Chemistry Department, Faculty of Science, Cairo University), A. M. A. Mohamed (Qatar University), A. Bahgat, and M. Almaadeed (Center for Advanced Materials, Qatar University, Doha 2713, Qatar)
08:20
707
The Use of 3D-Svet for the Examination of Plasticised PVC Coatings: The Effect of Deformation and UV Irradiation on Barrier Properties
J. R. Searle (SPECIFIC, Swansea University), B. P. Wilson, K. Yliniemi (Aalto University), D. A. Worsley, and H. N. McMurray (Swansea University)
08:40
708
Effect of Nano-Encapsulated Corrosion Inhibitors on Self-Healing Corrosion Protection of Steel Sheets
H. N. Choi, J. S. Kim (POSCO), and J. M. Park (POSTECH)
09:00
709
Epoxy/Magnetite/Carbon Nanofibers Nanohybrid Coatings for Anticorrosion
Z. Guo, H. Wei, H. Gu, J. Guo, Y. Wang (Integrated Composites Laboratory (ICL), Dan F. Smith Department of Chemical Engineering, Lamar University, Beaumont, TX 77710 USA), and S. Wei (Department of Chemistry and Biochemistry, Lamar University, Beaumont, TX 77710 USA)
09:20
710
Storage and Release of Corrosion Inhibitors from Commercial Primers
P. Klomjit and R. Buchheit (The Ohio State University)
09:40
Break
10:00
711
Hybride Sol-Gel Coatings for Protection of Aluminium Alloys
P. Rodic and I. Milosev (Jozef Stefan Institute)
10:20
712
New Trends in Chemistry at Steps Due to Mechanical Stress and Relevance to Corrosion
M. F. Francis (Brown University, École Polytechnique Fédérale de Lausanne) and W. A. Curtin (École Polytechnique Fédérale de Lausanne)
10:40
713
Ångstrom Resolved Real-Time Monitoring of Oxide Growth and Reduction on Noble and Engineering Metals
M. Valtiner, H. W. Cheng, B. R. Shrestha, T. Baimpos, and S. Raman (Max-Planck-Institut f. Eisenforschung GmbH)
11:00
714
Application of a Methodology Combining Predictive and Descriptive Models to Describe the Influence of the Temperature on the Passive Film Steady State
C. Boissy, B. Ter-Ovanessian, and B. Normand (INSA-Lyon, MATEIS, UMR CNRS 5510, F-69621, France)
11:20
715
Electrical Characterization of a Cement Paste with Carbon Fiber by Electrochemical Impedance Spectroscopy
C. P. Barrios (Universidad Autonoma de Sinaloa), R. E. Nuñez (Facultad de Ingeniería Mochis, Universidad Autónoma de Sinaloa (UAS)), M. J. Pellegrini (Centro de Investigación en Materiales Avanzados, Física de Materiales), J. H. Castorena (Facultad de Ingeniería Mochis, Universidad Autónoma de Sinaloa), and J. P. Garcia (Facultad de Ingeniería, Universidad Autónoma de San Luis Potosí)
See more of: C1: Corrosion General Session
See more of: Corrosion Science and Technology
<< Previous Session | Next Session >>