I06 Poster Session

Wednesday, 27 May 2015: 18:00-20:00
Salon C (Hilton Chicago)
Chair:
Adam Z Weber
1661
Correlation between Local Temperature and Degradations in Polymer Electrolyte Membrane Fuel Cells
F. Nandjou (CEA, LEPMI), J. P. Poirot-Crouvezier, M. Chandesris, J. F. Blachot (CEA), C. Bonnaud, and Y. Bultel (LEPMI)
 
1662
Improvement of the Process Model for the Ohmic Loss of the Proton Exchange Membrane Fuel Cell (Cancelled)
1663
Comparison of Startup and Shut down cycles in a Non-Segmented and Segmented Polymer-Electrolyte-Membrane Fuel Cell Hardware
M. Schwager, S. R. Dhanushkodi, and W. Mérida (Clean Energy Research Centre, UBC)
1664
Spatially Resolved Electrochemical Impedance Measurement in a PEM Fuel Cell Using an Array of Reference Electrodes
E. Brightman (National Physical Laboratory), C. Lyu (Harbin Institute of Technology), and G. Hinds (National Physical Laboratory)
1665
Cost Effective Fabrication and Characterization of in-Membrane Micro-Fuel Cell
S. R. Mahmoodi and R. S. Besser (Stevens Institute of Technology)
1666
Mass Transfer Overpotentials in Dispersed Pt/C and De-Alloyed PtNi/C Polymer Electrolyte Fuel Cell Cathodes
X. Wang, J. K. Peng, R. Ahluwalia, D. J. Myers (Argonne National Laboratory), and Z. Yang (United Technologies Research Center)
1667
Investigating Local Temperature and Related Parameters in Large Area Pemfcs through a Pseudo-3D Physic-Based Model
Y. Bultel, F. Nandjou (LEPMI), J. P. Poirot-Crouvezier, and M. Chandesris (CEA)
See more of: I06: State-of-the-Art Tutorial on Diagnostics in Low-Temperature Fuel Cells
See more of: Fuel Cells, Electrolyzers, and Energy Conversion
<< Previous Session | Next Session >>