I01A Poster Session

Monday, 14 October 2019: 18:00-20:00
Grand Ballroom (The Hilton Atlanta)
Perforation Optimization of DMFC Anode Porous Medium
A. Alrashidi (Clean Energy Research Institute, University of Miami), H. Liu (University of Miami), and X. Zhang (Clean Energy Research Institute)
Formulating Reduced-Order Models to Include Mesoscale Methods in Full Proton Exchange Membrane Fuel Cell Models
J. B. Grunewald (Georgia Institute of Technology), A. N. Mistry, A. Verma, N. Goswami, P. P. Mukherjee (Purdue University), and T. F. Fuller (Georgia Institute of Technology)
Mass-Transport Resistances of Acid and Alkaline Ionomer Layers: A Microelectrode Study
J. G. Petrovick (Chemical and Biomolecular Engineering, UC Berkeley, Lawrence Berkeley National Laboratory), D. I. Kushner, M. Tesfaye, N. Danilovic, C. J. Radke, and A. Z. Weber (Lawrence Berkeley National Laboratory)
Water Transport in PEFC Cold Startup with Temperature Rise Simulating Adiabatic Condition
K. Hirai and Y. Tabe (Hokkaido University)
Development of Graphene-Based PEFC Catalyst Layer for Reduction of Oxygen Transport Resistance
K. Yada and Y. Tabe (Hokkaido University)
Development of Hydrophobic Coating for Gas Diffusion Media in PEM-Based Electrochemical Hydrogen Pump
M. Lee and X. Huang (University of South Carolina)
A Study on the Influence of Ionization Method on Single Cell Initial Performance: Electrospray Method
S. Cho, K. Tamoto, K. Kakinuma, and M. Uchida (Fuel Cell Nanomaterials Center, University of Yamanashi)
Between Physical Complexity and Simplicity: Nailing Down the Cathodic Activation Overpotential in a Small-Scale PEM Fuel Cell
C. Gerling, M. Hanauer, U. Berner (Robert Bosch GmbH), and K. A. Friedrich (German Aerospace Center)
Comparing Different Cross-Section Cutting Methods for SEM Analysis of Membrane-Electrodes Assemblies
S. Merino, C. Novillo, G. de Diego, J. J. Conde, P. Ferreira-Aparicio, and A. M. Chaparro (CIEMAT)
Membrane Electrode Assembly Fabrication Method Effects on Catalyst Layer Structure, Interfaces, and Performance
S. Medina (National Renewable Energy Laboratory, Colorado School of Mines), M. Wang, T. Van Cleve, S. A. Mauger, M. Ulsh, K. C. Neyerlin (National Renewable Energy Laboratory), and S. Pylypenko (Colorado School of Mines, National Renewable Energy Laboratory)
Constrained Optimization of Proton Exchange Membrane Fuel Cells Using a Finite Element Approach
J. Lamb (FAMU-FSU College of Engineering) and P. Andrei (FAMU-FSU College of Engineering, Florida State University)
See more of: I01A: Polymer Electrolyte Fuel Cells & Electrolyzers 19 (PEFC&E-19) - Diagnostics/Characterization Methods, MEA Design/Model
See more of: Fuel Cells, Electrolyzers, and Energy Conversion
<< Previous Session | Next Session >>