A05 Li-ion for Transportation: Fast Charging, Sustainability, Safety, Life Cycle, Recycling - 1

Thursday, 17 October 2019: 08:00-12:40
Room 220 (The Hilton Atlanta)
08:00
(Invited) Towards the Realization of Sustainable High-Performance Lithium-Ion Batteries: Aqueous Processing of Cobalt-Free High-Energy Cathodes
M. Kuenzel (Helmholtz Institute Ulm (HIU)), A. Kazzazi (KIT HIU), G. T. Kim (KIT), D. Bresser, and S. Passerini (Karlsruhe Institute of Technology (KIT))
08:40
Towards Fast Charging of High Energy Density Li-Ion Batteries
Z. Du (Oak Ridge National Laboratory), T. Liu (Oak Ridge National Laboratory, Virginia Tech), X. Wu (Purdue University, Oak Ridge National Laboratory), F. Lin (Department of Chemistry, Virginia Tech), K. Zhao (Purdue University), D. L. Wood III, and I. Belharouak (Oak Ridge National Laboratory)
09:00
Specific Influences and General Trends in Li-Ion Cells – Electrode Parameters, Cell Format, and Fast-Charging Capability
T. Waldmann (ZSW - Center for Solar Energy and Hydrogen Research), J. B. Quinn (ZSW), K. Richter, M. Kasper (ZSW - Center for Solar Energy and Hydrogen Research), and M. Wohlfahrt-Mehrens (ZSW)
09:20
10-Min Fast Charging of Automotive Li-Ion Batteries at an Elevated Temperature
X. G. Yang, T. Liu, and C. Y. Wang (Electrochemical Engine Center, Pennsylvania State Univ.)
09:40
Break
10:00
10:40
Modeling Impact Safety of Lithium-Ion Batteries in Electrified Vehicles
J. Deng, C. Bae, T. J. Miller (Ford Motor Company), and P. L'Eplattenier (Livermore Software Technology Corporation)
11:00
For Battery Safety Sake: Operando Quantification of Lithium Concentration Gradients in the Graphite Anode of Li-Ion Cells Using Synchrotron Energy Dispersive X-Ray Diffraction
K. P. C. Yao (University of Delaware), J. Okasinski (Argonne National Laboratory), K. Kalaga (Zenlabs Energy), I. A. Shkrob (Argonne National Laboratory), and D. P. Abraham (Argonne National Lab)
11:20
Lithium-Ion Battery Safety Tests Monitored By Labview and Comsol Software for Electrical and Mechanical Characteristics
M. M. Tripathi V (Delhi technological University), A. K. Panwar III, and S. Sharma Jr. (Delhi Technological University)
11:40
Predicting the Thickness Change of a Large Format Pouch Cell during Operation
D. J. Pereira (University of South Carolina), M. Fernandez, K. C. Streng, J. Gao, T. R. Garrick (General Motors), and J. W. Weidner (University of South Carolina)
12:00
Analyzing the Effects of Lithium Plating on the Safety Performance of Lithium-Ion Batteries
E. Deichmann, L. Torres-Castro, M. Karulkar (Sandia National Laboratories), J. Lamb (Sandia National Laboraties), and F. H. Garzon (University of New Mexico)
12:20
Degradation of Commercial Lithium-Ion Cells Beyond 80% Capacity
Y. Preger, A. Fresquez, B. R. Chalamala, and S. Ferreira (Sandia National Laboratories)