A05 Alternative Li-ion Cell Components: Chemistries and Fabrication - 2

Tuesday, 15 October 2019: 14:00-17:40
Room 220 (The Hilton Atlanta)
14:00
New Separator Materials for Lithium-Ion and Lithium Primary Batteries Operating in Extreme Environments
E. J. Brandon, K. J. Billings, B. V. Ratnakumar, S. C. Jones, J. Pasalic, J. Seong, W. N. Warner (NASA/Jet Propulsion Laboratory/Caltech), C. Hu, and B. Morin (Soteria)
14:20
Melt-Process for the Preparation of Porous Composite Electrodes for Battery Application
N. Verdier (Université de Montréal), S. El Khakani (Université du Québec à Montréal), D. Lepage (UQAM, Current Address: Université de Montréal), A. Prébé (Hutchinson SA), M. Dollé, and D. Rochefort (Université de Montréal)
14:40
Functional Binders for Li-, Na-, and K-Ion Batteries
S. Komaba, T. Horiba, K. Kubota, and M. Fukunishi (Tokyo University of Science, ESICB-Kyoto University)
15:00
Adhesive and Heat Resistant Separator for Long-Term Stable Lithium Ion Batteries
E. J. Park, J. Ahn, M. Yoo, J. Im (Hanyang University), E. K. Jang (hanyang university), J. H. Lee (Susan Polymer Co., Ltd.), and K. Y. Cho (Hanyang University)
15:40
Break
16:00
(Invited) Searching for High Potential Organic Cathode Materials for High Energy Green and Sustainable Batteries
A. Jouhara (IMN-CNRS, University of Nantes), F. Dolhem (LG2A-CNRS, RS2E, UPJV), D. Guyomard, N. Dupré (IMN-CNRS, University of Nantes), and P. Poizot (IMN, CNRS, University of Nantes)
16:40
Reduced Surface Area Cathode Particles By Mechanofusion Processing
L. Zheng (Department of chemistry, Dalhousie University) and M. N. Obrovac (Dalhousie University)
17:00
Design Criteria of SEI Layers for Lithium-Ion Batteries with Aqueous Electrolytes
D. Oh, U. Subramanya, C. Chua, and S. Pusri (San Jose State University)
17:20
Prototype Aqueous Lithium-Ion Battery with a Lithium-Ion Conductive Solid Electrolyte Separator
H. Seki, K. Yoshima, Y. Yamashita, S. Matsuno (Toshiba Corporation), and N. Takami (Corporate Research & Development Center, Toshiba Corp.)