Monday, 30 May 2022: 12:00
West Meeting Room 203 (Vancouver Convention Center)
A. K. Vats, K. Matsuo, and H. Yamada (Nara Institute of Science and Technology (NAIST))
Organic photovoltaics have attracted much attention for the next generation of photovoltaics. Tetrabenzoporphyrin (BP) is a p-type organic semiconductor characterized as the large, rigid p
-framework, excellent stability, and good photoabsorption capability. Because of the low solubility, thermal precursor approach is necessary for the deposition of BP by solution process, where a soluble precursor (CP) of BP is spin-coated on the substrate, followed by annealing of CP film to make BP film by in-situ retro-Diels-Alder reaction of CP.[1,2] In 2017, we reported side-chain engineering for efficient photocurrent generation using a series of diketopyrrolopyrrole (DPP)–tetrabenzoporphyrin (BP) conjugates named Cn-DPP–BP (n = 4, 6, 8 or 10 depending on the length of n-alkyl groups on the DPP unit) as p-type materials in BHJ OPVs in combination with PC61BM as a n-type material by the thermal precursor approach.[3] The comparative study shows that the short-circuit current density largely depends on the length of alkyl substituents, ranging from 0.88 mA cm-2 with C10-DPP–BP to 15.2 mA cm-2 with C4-DPP–BP. C10-DPP–BP in the film is edge-on orientation dominant while that of C4-DPP–BP is face-on orientation dominant.
Encouraged with the results, we synthesized a zinc complex of C4-DPP-CP (C4-DPP-ZnCP) as a soluble precursor of C4-DPP-ZnBP to investigate the effect of metalation of the porphyrin cavity for the BHJ OPV performance. BHJ OPV was prepared by thermal precursor approach: spin-coating of a mixed solution of the precursor, C4-DPP-ZnCP, and PC61BM, followed by annealing at 200 ºC to make a blend film of C4-DPP-ZnBP and PC61BM. Interestingly, the energy gap and ionization potential of C4-DPP-ZnBP film and C4-DPP-BP film are similar to each other, but the Jsc of C4-DPP-ZnBP is 1.5 times larger than that of C4-DPP-BP. We will discuss the relationship between film morphology and OPV performance by studying the blend film of C4-DPP-ZnBP/PC61BM by atomic force microscopy (AFM), X-ray diffraction (XRD) analysis and p-polarized multiple-angle incidence resolution spectrometry (p-MAIRS).
References
- H. Yamada, T. Okujima, N. Ono, Chem. Commun. 2008, 2957-2974.
- H. Yamada, D. Kuzuhara, M. Suzuki, H. Hayashi, N. Aratani, Bull. Chem. Soc. Jpn. 2020, 93, 1234-1267.
- K. Takahashi, D. Kumagai, N. Yamada, D. Kuzuhara, Y. Yamaguchi, N. Aratani, T. Koganezawa, S. Koshika, N. Yoshimoto, S. Masuo, M. Suzuki, K. Nakayama, H. Yamada, J. Mater. Chem. A 2017, 5, 14003-14011.
