I03 - Fuel Cell Performance 2

Monday, 30 May 2022: 08:00-12:40
West Meeting Room 212 (Vancouver Convention Center)
Chairs:
Frederic Jaouen and Erik Kjeang
08:00
1427
Universal Correlation between the Roughness Factor and PEMFC Performance Losses in Voltage Cycling Based Accelerated Stress Tests
R. K. F. Della Bella, B. M. Stühmeier, and H. A. Gasteiger (Technical University of Munich)
08:20
1428
Aerogel-Derived Fe-N-C Catalysts for Oxygen Electro-Reduction. Linking Their Pore Structure and PEMFC Performance
F. Jaouen (CNRS ICGM), H. Ge (Mines ParisTech), K. Kumar (CNRS LEPMI), N. Bibent (CNRS ICGM), F. Maillard, L. Dubau (CNRS LEPMI), and S. Berthon-Fabry (Mines ParisTech)
08:40
1429
Fabrication and Performance Evaluation of Tubular Catalyst Layer for Proton Exchange Membrane Fuel Cell
S. Pedram and J. Jankovic (University of Connecticut)
09:00
1430
Understanding Key Factors during Dod Inkjet Printing Towards Precise Fabrication of Micro Energy Systems
H. Huang and T. Hill (Wright State University)
09:20
1431
Characterizing Liquid Water Distribution in Polymer Electrolyte Fuel Cells Using Operando 2D and 3D X-Ray Imaging
F. A. Aroge, J. A. MacDonald, C. Buchko, F. P. Orfino (Fuel Cell Research Lab (FCReL), Simon Fraser University), M. Dutta (Ballard Power Systems), and E. Kjeang (Fuel Cell Research Lab (FCReL), Simon Fraser University)
09:40
1432
Improved Operando Stability of the PEFC Electrode Via Low-Pressure Decal Transfer Method Based on Binary-Solvent-Mixture Swelling Agent
H. Choi, W. Y. Choi (Korea Institute of Energy Research, Hanyang University), S. W. Choi (Korea Institute of Energy Research, Gwangju Institute of Science and Technology), M. Lee (Korea Institute of Energy Research), Y. J. Park (Korea Institute of Energy Research, Hanyang University), Y. G. Yoon (Korea Institute of Energy Research), S. C. Yi (Hanyang University), and C. Y. Jung (Korea Institute of Energy Research)
10:00
Break
10:20
1433
Manufacture and Performance of 3D Printed Carbonised Gas Diffusion Layers
D. Niblett, Z. Guo, V. J. Niasar, S. Holmes, and R. Prosser (University of Manchester)
10:40
1434
Engineering Electrodes with Bimodal Pore Size Distributions for Next-Generation Electrochemical Devices
A. Mularczyk and A. Forner-Cuenca (Eindhoven University of Technology)
11:00
1435
Operating Micro Fuel Cells at a Constant Relative Humidity
N. M. Bielefeld, R. D. Sørensen, M. Jørgensen, K. S. Kure, and T. Berning (Aalborg University)
11:20
1436
Channel Diameter Effect of Porous Carbon Microparticles on PEMFC Performance for Highly Active Ultra-Low Pt Catalysts
H. E. Kim, Y. J. Lee, and H. Lee (KAIST)
11:40
1437
Transferability of a Modeled Cathode Accelerated Stress Test for Carbon Corrosion between the Membrane Electrode Assembly and the Rotating Disk Electrode
A. Jurjević, C. Mohrdieck (cellcentric GmbH & Co. KG, Universität Ulm, Institut für Oberflächenchemie und Katalyse (IOK)), M. Reindl, and N. Weidler (cellcentric GmbH & Co. KG)
12:00
1438
ORR Activity and Stability of a Carbon-Supported Ptxy Alloy Catalyst Evaluated in a PEM Fuel Cell
P. A. Loichet, Y. S. Li, C. Grön, T. Lazaridis (Technical University of Munich), C. H. Liebscher, P. Watermeyer (Max-Planck-Institut für Eisenforschung), and H. A. Gasteiger (Technical University of Munich)
12:20
1439
Spatially Resolved Deconvolution of Loss Processes in PEM Fuel Cells
P. Oppek, M. Geörg, T. Goosmann (Karlsruhe Institute of Technology), T. V. Reshetenko (Hawaii Natural Energy Institute), A. Weber, and U. Krewer (Karlsruhe Institute of Technology)
See more of: I03: Materials for Low Temperature Electrochemical Systems 8
See more of: Fuel Cells, Electrolyzers, and Energy Conversion
<< Previous Session | Next Session >>