Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. In this talk I will show that the nanoelectrode tip of an atomic-force-microscope cantilever can sense the surface electrochemical potential of thin-film and nanoscale electrocatalysts coating semiconductor photoelectrodes during operation. This technique allowed us to unambiguously show that metal (oxy)hydroxide layers act as both hole collectors and oxygen-evolution catalysts on metal-oxide photoanodes such as Fe₂O₃ and BiVO₄. We also discovered the critical role that heterogeneous interfacial barrier heights, and a related nanoscale pinch-off effect, play in building carrier-selective interfaces in semiconductor photoelectrodes for generating fuel from sunlight. As specific example, thin films and nanoparticle of Pt hydrogen-evolution catalysts on p-InP, a high-performance photocathode material, along with macroscopic and nanoscopic electrical and chemical analysis, are used to show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. These measurements are compared and contrasted to a new approach to “wirelessly” measure interfacial for different contact materials by analyzing shifts in element-specific shifts in x-ray photoelectron emission energies. The sum of these new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.