The increasing availability of renewable energy sources, especially solar power, coupled with the desire to reduce greenhouse gas emissions, has led to an increased interest in using renewables to satisfy global energy demand. Hydrogen is an attractive alternative to fossil fuels due to its potential for emissions reductions and advantages in storage and transportation. Direct solar-to-hydrogen generation would enable the conversion of renewable energy and water into a storable fuel, thereby drastically reducing carbon emissions. However, current hydrogen production from commercial PEM electrolysis systems requires acidic environment which necessitates the use of expensive platinum group metal (PGM) catalysts and corrosion resistant cell stack components. Thus, a stable, robust, and inexpensive anion exchange membrane and PGM-free catalysts are needed to make alkaline solar water splitting commercially viable as a replacement for the expensive PEM system.

We have developed a fully PGM-free electrolyzer using anion exchange membrane (AEM) in an alkaline environment that operates at 80 °C. Using carbon supported NiMo as hydrogen evolution reaction (HER) catalyst and NiFe as oxygen evolution reaction (OER) catalyst, in combination with commercially available AEM from Versogen, we were able to achieve a stable performance of 1.504 V at 100 mA/cm², compared with baseline PGM cell at 1.508 V, in alkaline environment. At 2 A/cm², the fully PGM-free cell demonstrated 200 mV higher potential compared to the PGM baseline cell at 2.009 V. Furthermore, we were able to run more than 200-hour at constant current density 2 A/cm², with 85 mV performance loss. Further developments in catalyst performance and membrane stability, as well as integration with photovoltaics to enable hydrogen production from water, are underway.

Acknowledgement: The project is financially supported by the Department of Energy’s Office of Science under the Grant DE-SC0020576