Electrochemical Energy Storage VIII

Sunday, 16 March 2014: 08:30-16:10
Grand Ballroom 1, Third Floor (InterContinental Puxi)
Chair:
Duncan Gregory
08:30
311
Keynote Presentation: Proposal of New Anode Material Synthesized By Electro-Reduction for Future Lithium Batteries
T. Momma (Faculty of Science and Engineering, Waseda University, Research Institute for Science and Engineering, Waseda University), H. Nara, T. Yokoshima, and T. Osaka (Faculty of Science and Engineering, Waseda University)
09:00
312
Structure Controlled Porous Carbon Materials As Hosts for Lithium-Ion Batteries
F. Han, X. Q. Zhang, and A. H. Lu (State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology)
09:20
313
Synthesis and Characterizations of High Density Cathode Materials Synthesized Via Supercritical Fluid Process
M. K. Devaraju and I. Honma (Institute of Multidisciplinary Research for Advanced Materials, Tohoku University)
09:40
Coffee Break (Amber Room, Third Floor)
10:30
315
A Novel Pseudo-Polyanion Layered Materials Li[Li0.2Ni0.13Co0.13Mn0.54](BO3)x-a(BO4)aO2-δ with High Stability for the Cathode of Li-Ion Batteries
B. Li (Key lab of theory and technology for advanced batteries materials, College of Engineering, Peking University, Beijing 100871, P. R. China.), W. Huang (National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, 230029, P.R. China.), J. Ma, D. Xia (Beijing Key Laboratory for Theory and Technology of Advanced Battery Materials, College of Engineering, Peking University), Z. Wu (University of Science and Technology of China), and W. Chu (National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, 230029, P.R. China.)
10:50
316
Lithium Manganese Rich Transition Metal Oxide As Cathode Material for Lithium Ion Batteries
W. Lu, Q. Wu (Argonne National Laboratory), V. A. Maroni (Chemical Sciences and Engineering Division, Argonne National Laboratory), Y. Liu, D. Gosztola (Argonne National Laboratory), C. Johnson (Chemical Sciences and Engineering Division, Argonne National Laboratory), and D. W. Dees (Argonne National Laboratory)
11:10
317
Preparation of MoS2/Rgo Composites and Their Performance As Lithium Ion Battery Anodes
Y. Jing (Nankai University), E. O. Ortiz-Quiles (University of Puerto Rico), C. R. Cabrera (University of Puerto Rico at Rio Piedras), Z. Chen (University of Puerto Rico), and Z. Zhou (Nankai University)
11:30
318
11:50
319
Engineering Carbon/Inorganic Nanohybrids for Advanced Lithium Ion Battery Anodes
B. Wang, X. Li, and L. Zhi (National Center for Nanoscience and Technology)
12:10
Lunch (Amber Room, Third Floor)
13:30
320
High Performance Polyacene-Coated LiMnPO4 Cathode Material for Lithium-Ion Batteries
P. Zuo, L. Wang, Y. Ma, C. Du, X. Cheng, Y. Gao (Harbin Institute of Technology), and G. Yin (School of Chemical Engineering and Technology, Harbin Institute of Technology)
13:50
321
High Rate Ti-Based Anode Materials Forrechargeable Batteries
K. T. Kim (Sejong University), S. M. Oh, Y. K. Sun (Hanyang University), and S. T. Myung (Sejong University)
14:10
322
Fluorinated Electrolytes for 5 V Li-Ion Chemistry
L. Hu, Z. Xue, N. Azimi, and Z. Zhang (Argonne National Laboratory)
14:30
323
Study of Li3VO4 As a Promising Insertion Anode Material for Lithium-Ion Batteries
H. Li (School of Material Sciences and Engineering, Huazhong University of Science and Technology (HUST))
14:50
324
Advanced aqueous rechargeable lithium battery of LiTi2(PO4)3/C//LiMn2O4
Y. Jiang, D. Sun, and H. Wang (Central South University)
15:10
325
Control of bacterial extracellular electron transfer by a Solid-State Mediator of Polyaniline Nanowires Arrays
H. Liu, C. Ding, and L. Jiang (School of Chemistry and Environment, Beihang University)
15:50
327
Improvement of cycling properties for porous Si powder prepared by acid etching Al-Si alloy powder
Z. Jiang (Fudan University), C. Li, and W. Tian (Shanghai Institute of Space Power Sources, Shanghai 200240)