Recent ECEE Posters

Friday, 14 March 2014: 17:20-19:20
Foyer, Second and Third Floors (InterContinental Puxi)
574
Dense and Alternately Stacked Coo/Graphene Composite through Pre-Aligned Graphene As a Next Generation Lib Anode
R. Prabakar (Dept. of Printed Electronics Engg. Sunchon National University, Sunchoen, S.Korea), S. C. Han (Dept. of Printed Electronics Engg. Sunchon National Univ. Chonnam 540-742, S.Republic of Korea), and M. Pyo (Dept.of Printed Electronics Engineering. Sunchon National University, Sunchoen, S.Korea)
575
MnO Nanoparticles Embedded in Amorphous Carbon As High-Performance Anode for Lithium-Ion Batteries
H. Wei (Beijing Key Laboratory for Theory and Technology of Advanced Battery Materials, College of Engineering,Peking University) and D. Xia (Beijing Key Laboratory for Theory and Technology of Advanced Battery Materials, College of Engineering, Peking University)
577
Amorphous Titanium/Vanadium Oxide Composite As a High-Rate Negative Electrode Material for Lithium-Ion Batteries
J. B. Lee, O. B. Chae (Department of Chemical and Biological Engineering, Seoul National University), J. H. Ryu (Graduate School of Knowledge-based Technology and Energy, Korea Polytechnic University), and S. M. Oh (Department of Chemical and Biological Engineering, Seoul National University)
578
Doped Graphene Nanocomposites As Energy Materials for Supercapacitors
X. Xia, W. Wang, P. Liu, Q. Hao, and X. Wang (Key Laboratory for Soft Chemistry and Functional Materials , Ministry of Education, Nanjing University of Science and Technology)
580
Metal Oxide Based Enzymatic Biofuel Cell for Power Generation
Y. C. Li, H. J. Leu, and S. Y. Wu (Feng Chia University)
581
Electrochemical Preparation of Copper Nanoparticles in Choline Chloride-Urea Deep Eutectic Solvent
Q. Zhang, R. Wang, and Y. Hua (Kunming University of Science and Technology)
582
Electrolytic Recovery of Cobalt from Hard Metal Scraps
B. S. Seo (University of Ulsan), S. H. Son (Korea Institute of Industrial Technology), and S. Kim (University of Ulsan)
584
A Microstructural Resolved Model for the Stress Analysis of Lithium-Ion Batteries
X. Xiao, M. Wang, W. Wu (Michigan State University), and X. Huang (General Motors Global R& D Center)
585
Thermal Analysis Methods for Design of Composite Materials with Complex Structure
N. Jaworski, I. Farmaga, O. Matviykiv, M. Lobur (Department of Computer-Aided Design of Lviv Polytechnic National University), P. Spiewak, L. Ciupinski, and K. J. Kurzydlowski (Faculty of Materials Science and Engineering, Warsaw University of Technology)
586
Optimizing of the Electrode Parameters of Lithium-Ion Battery for Power Application
H. Bian, P. Mu (Henan Xintaihang Power Sources Co., Ltd), and E. Song (Henan Kelong Cooperation)
587
Electrochemical Mechanism of the Room Temperature Sodium Sulfur Battery
I. Kim, J. Y. Park, J. W. Park, C. Kim (School of Materials Science and Engineering, Gyeongsang National University), J. Noh, J. P. Ahn (Advanced Analysis Center, Research Planning & Coordination Division, KIST), J. H. Ahn (Department of Chemical & Biological Engineering, Gyeongsang National University), K. W. Kim, and H. J. Ahn (School of Materials Science and Engineering, Gyeongsang National University)
588
Electrochemical Properties of Sulfur-Polyacrylonitrile Composite Depending on Different States of Sulfur As Cathode Active Materials for Lithium Secondary Batteries
C. Kim, H. Kim, J. Y. Park, H. S. Ryu, K. W. Kim, and H. J. Ahn (School of Materials Science and Engineering, Gyeongsang National University)
590
Current Lithium Ion Battery Research Using Shanghai Synchrotron Radiation Facility (SSRF)
W. Wen, M. Gao, X. Zhang, Y. Gu, G. Yin, T. Yang, and X. Gao (Shanghai Institute of Applied Physics)