Lithium-ion batteries (LIBs) using organic liquid electrolytes have been applied in portable devices such as laptops and cellular phones owing to its wide electrochemical stability, high voltages, and excellent energy density. LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523) cathode have attracted significant interest as the cathode materials for LIBs owing to their high capacity, excellent rate capability and low cost. NCM523 cathode materials have a disadvantage of structural instability, which caused by the reduction of Ni ions releases oxygen from the crystal structure at the high temeprature or high charged state, which can lead thermal runaway by reacting with the flammable electrolyte. The use of organic liquid electrolytes in LIBs raises safety issues due to its flammable character and the impact on the explosion is greater in particular for relatively large systems such as electrical vehicles and grid storage. To overcome the safety issues, solid state batteries (SSBs) using a non-combustible solid state Li-ion conductor are regarded as the realistic alternative to prohibit the leakage of liquid electrolytes and the resultant fire hazards. However, due to the large resistance in the electrode-electrolyte interface, the capacity retention and cycle effieciency of the SSBs become worse. Previous studies on SSBs have been mainly focused on developing solid state electrolytes with high ion conductivity. Despite growing interest in stability, the systematic studies of safety of SSBs depending on the type of electrolyte has never been evaluated so far. It is necessary for understanding structural deformations on the cathode material in the effects of the reactions beween the electrode and various types of electrolytes, which is essential for ensuring the safety of the batteries.

In this study, we investigate the structural degradation and thermal stability on NCM523 cathode materials by taking an advantage of in situ transmission electron microscopy (TEM) in various electrolyte conditions, including conventional liquid electrolyte, poly(ethylene oxide) (PEO) complexes with LiClO₄ (PEO-based solid electrolyte), and PEO/LiClO₄/Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) composite electrolyte (PEO-inorganic composite electrolyte). Since the LATP oxide electrolyte has brittleness and the PEO has flexibility, it adopts a composite electrolyte having inorganic and organic phases with good interface contact with the cell electrode. A cell composed of each electrolyte was prepared and charged with cut-off voltages of 3.9 V and 4.3 V at a rate of 0.05 C after the second formation process for stabilzing the cell. The capacity at the same cut-off voltage decreases in the order of conventional liquid electrolyte, PEO-based solid electrolyte, and PEO-inorganic composite electrolytes. To understand the thermal stability and the degradation mechanism, modifications in selected-area electron diffraction (SAED) and electron energy-loss (EEL) spectra of oxygen K-edge and transition metal (Ni, Co, Mn) L-edges of each of charged NCM523 cathode materials are monitored in real time at the range from room temperature to 300°C. Our work demonstrated that contact resistance at the interface between the electrode and electrolyte is important factor. This work provides important information on the relationship with structural deformation and thermal stability of the cathode materials, which is an essential part of the rational design to develope for high engergy densities and safe SSBs. All the details will be available at the meeting.

Acknowledgement

This work was supported by the Korea Institute of Science and Technology (KIST) Institutional Program (Project 2E28142). This work was also supported by the National Research Foundation of Korea (NRF) grant (No. 2018R1A2B2005205).