750
Far- and Near-Field Spectroscopy and Imaging of the SEI Layer on a Tin Electrode.
Several analytical techniques have been implemented for the physico-chemical characterization of the materials, interfaces and interphases. In many cases limitations in studying the real system are imposed by ex situ methods that require excitation or detection of electrons or ions in vacuum environment and/or they suffer from inadequate sensitivity, selectivity and specificity in the in situenvironment.
The advent of near-field optical methods during the past decades has led to the development of new advanced techniques for chemical analysis. This presentation provides a brief overview of novel in and ex situexperimental approaches aimed at probing battery materials and electrodes in electrical storage systems at an atom, molecular or nanoparticulate level.
A strong understanding of the solid electrolyte interphase (SEI) (1,2) layer in lithium-ion batteries is necessary for further development of the technology, leading the path to application of high energy density intermetallic anodes However, the identification of chemical compounds in this surface layer, as well as their spatial distribution, has been limited by diffraction to the 5-10 μm wavelength scale available to traditional Fourier Transform Infrared spectroscopy (FTIR). This study demonstrates deeply subwavelength imaging of the SEI using infrared (IR) near-field scanning optical microscopy (NSOM). NSOM (3) is a technique based on light confinement at the apex of an atomic force microscope (AFM) probe. The tight optical focusing combined with the placement of the probe within small fractions of a wavelength allow resolution well below the classical diffraction limit, while simultaneously obtaining topographic information about the sample surface and the present SEI. Additionally, this microscope is highly surface-sensitive, allowing selective optical imaging of the interfacial layers. The NSOM used here is configured as part of a pseudo-heterodyne interferometer, which allows high signal-to-noise ratio as well as collection of the optical phase.
The presented methodologies exploit the micro and nano-manipulation techniques and Sn single crystal model electrodes to provide sufficient sample definition suitable for advanced far- and near-field Raman, FTIR and electrochemical characterization techniques. Examples of detailed in situmolecular characterization of electrode surface and bulk processes at the nano-level scale exceeding the diffraction limit will be discussed. These include elemental and molecular depth profiling at nanometer-scale depth resolution of a solid electrolyte interface (SEI) layer formed on Sn polycrystalline and monocrystral model electrodes in an organic carbonate-based electrolyte.
Acknowledgement
Part of this work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the U.S. Department of Energy, under contract no. DE-AC02-05CH11231. It has also been supported in part by the Northeastern Center for Chemical Energy Storage, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under award number DESC0001294. This work was also supported in part by the Chemical Science Division, Office of Basic Energy Sciences, Office of Nuclear Nonproliferation, and the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
References
1. E. Peled, J. Electrochem. Soc., 126, 2047 (1979).
2. M. Winter, Z. Phys. Chem., 223, 1395 (2009).
3. L. Novotny and B. Hecht, Principles of Nano-Optics,
Cambridge University Press, Cambridge (2006).