820
High Energy Density Aqueous Electrochemical Capacitors with a KI-KOH Electrolyte

Tuesday, 21 June 2016
Riverside Center (Hyatt Regency)
X. Wang, R. S. Chandrabose (Oregon State University), S. Chun (University of Oregon), T. Zhang (Oregon State University), B. Evanko (University of California Santa Barbara), Z. Jian (Oregon State University), S. W. Boettcher (Department of Chemistry, University of Oregon), G. Stucky (University of California, Santa Barbara), and X. Ji (Oregon State University)
We report a new electrochemical capacitor with an aqueous KI-KOH electrolyte that exhibits a higher specific energy and power than the state-of-the-art nonaqueous electrochemical capacitors.  In addition to electrical double layer capacitance, redox reactions in this device contribute to charge storage at both positive and negative electrodes via a catholyte of IOx-/I- couple and a redox couple of H2O/Had on the negative electrode, respectively.  Here, we, for the first time, report utilizing IOx-/I- redox couple for the positive electrode, which pins the positive electrode potential to be 0.4-0.5 V vs. Ag/AgCl.  With the positive electrode potential pinned, we can polarize the cell to 1.6 V without breaking down the aqueous electrolyte so that the negative electrode potential could reach -1.1 V vs. Ag/AgCl in the basic electrolyte, greatly enhancing energy storage.  Both mass spectrometry and Raman spectrometry confirm the formation of IO3- ions (+5) from I- (-1) after charging.  Based on the total mass of electrodes and electrolyte in a practically relevant cell configuration, the device exhibits a maximum specific energy of 7.1 Wh/kg, operates between -20 to 50 °C, provides a maximum specific power of 6222 W/kg, and has a stable cycling life with 93% retention of the peak specific energy after 14,000 cycles.