SOFC-XIV: Modeling 2

Thursday, 30 July 2015: 08:20-12:00
Alsh (Scottish Exhibition and Conference Centre)
Chairs:
Naoki Shikazono and Alain Thorel
08:20
280
Modeling Water Reduction on Doped Ceria Thin Films
H. Valdes-Espinosa, E. M. Stuve, and S. B. Adler (University of Washington)
08:40
281
Detailed H2 and CO Electrochemistry for a MEA Model Fueled by Syngas
W. Y. Lee, K. M. Ong, and A. F. Ghoniem (Massachusetts Institute of Technology)
09:00
282
Three Dimensional Temperature Distribution Analysis in Directly Internal Reforming SOFC Fuelled by Methane
T. Ogura and K. Wakamatsu (Kwansei Gakuin University)
09:20
283
Simulation of Start-up of Anode Gas Recycle SOFC System Using Catalytic Combustion Method
S. Baba, N. Kobayashi, S. Takahashi, and S. Hirano (AIST)
09:40
284
A Lumped Dynamic Modelling Approach for Model-Based Control and Diagnosis of Solid Oxide Fuel Cell System with Anode Off-Gas Recycling
D. Marra, M. Sorrentino (Dept. of Industrial Engineering, University of Salerno), A. Pohjoranta (VTT Technical Research Centre of Finland), C. Pianese (Dept. of Industrial Engineering, University of Salerno), and J. Kiviaho (VTT Technical Research Centre of Finland Ltd)
10:00
Break
10:20
285
Process Analysis for Achieving Highly Enhanced Total Efficiency on Multi-Stage Fuel Supplied SOFC System
Y. Tachikawa (WPI-I2CNER, Kyushu University), Y. Matsuzaki (Kyushu University), T. Hatae (Tokyo Gas Co., Ltd.), S. Taniguchi (Kyushu University), and K. Sasaki (Next-Generation Fuel Cell Resarch Center)
10:40
286
Morphological Modelling of a Metal Foam Supported SOFC Configuration
D. Masson (Centre des Matériaux, Mines ParisTech, PSL), B. Abdallah, F. Willot, D. Jeulin (Centre de Morphologie Mathématique, Mines ParisTech, PSL), E. Mercadelli, A. Sanson (ISTEC-CNR), A. Chesnaud, and A. Thorel (Centre des Matériaux, Mines ParisTech, PSL)
11:00
287
High Efficient Combined Heat and Power SOFC System for Residential Power Applications: Lifetime-Efficiency-Simulations Using AspenPlusTM
C. Spieker, C. Spitta (Zentrum für Brennstoffzellentechnik ZBT GmbH), M. Noponen (Elcogen), P. Hallanoro (Elcogen OY), and T. Ruetten (MEKU Energie Systeme GmbH & Co.KG)
11:20
288
A Thermo Fluid and Thermo Mechanical Modelling of a Microtubular Solid Oxide Fuel Cell Stack for Unmanned Aerial Vehicles
B. Hari, A. Dhir (University of Birmingham), and R. Steinberger-Wilckens (University of Birmingham,UK)
11:40
289
Modeling Intermediate Temperature Protonic Ceramic Fuel Cells
K. J. Albrecht, C. Duan, R. O'Hayre, and R. J. Braun (Colorado School of Mines)
See more of: A: Solid Oxide Fuel Cells XIV (SOFC-XIV)
See more of: Fuel Cells, Electrolyzers, and Energy Conversion
<< Previous Session | Next Session >>