Poster Session (Joint ETD-Battery)
Wednesday, May 15, 2013: 18:00-20:00
Osgoode Ballroom, Lower Concourse Level (Sheraton)
Chairs:
Ayyakkannu Manivannan, PhD
and
Arumugam Manthiram
Electrodeposited Tin Film Anodes for Energy Storage Applications
Bharat Gattu, M.S., University of Pittsburgh;
Faith R. Beck, University of Pittsburgh;
Rigved Epur, University of Pittsburgh;
Moni Kanchan Datta, University of Pittsburgh;
Ayyakkannu Manivannan, PhD, National Energy Technology Laboratory;
Prashant N Kumta, PhD, University of Pittsburgh
Effect of Electrolyte Additive on Cycle Performance of Electrodeposited Si-O-C Composite Anode for Lithium Secondary Battery
Tokihiko Yokoshima, Dr, Waseda University;
Mitsutoshi Otaki, Waseda University;
Takanori Kato, Waseda University;
Hiroki Nara, Ph. D, Waseda University;
Toshiyuki Momma, Ph. D, Waseda University;
Tetsuya Osaka, Ph. D, Waseda University
Effect of Additive on Electrodeposition of Si-O-C Composite Anode for Lithium Secondary Batteries
Hiroki Nara, Ph. D, Waseda University;
Tokihiko Yokoshima, Dr, Waseda University;
Mitsutoshi Otaki, Waseda University;
Mika Nakamura, Waseda University;
Toshiyuki Momma, Ph. D, Waseda University;
Tetsuya Osaka, Ph. D, Waseda University
241
Mechanism of Charge Transport in Quinone-Pyrrole-Polymer Materials (Cancelled)
Chemical Changes in LiNi1/3Mn1/3Co1/3O2 Lithium-Ion-Battery Cathodes during Electrochemical Cycling
Hanshuo Liu, Dept. of Materials Science and Engineering, McMaster University;
Mark J.R. Dunham, Dept. of Chemistry, McMaster University;
Kristopher J. Harris, Dept. of Chemistry, McMaster University;
Jian Liu, Dept. of Mechanical and Materials Engineering, Western University;
Xifei Li, Dept. of Mechanical and Materials Engineering, Western University;
Xueliang Andy Sun, Dept. of Mechanical and Materials Engineering, Western University;
Meng Jiang, GM R&D Center;
Yan Wu, GM R&D Center;
Gillian R Goward, McMaster University;
Gianluigi A. Botton, Department of Material Science and Engineering, McMaster University
Nanostructural Characterization of Catalyst Layers in PEMFC: Sample Preparation Considerations
Lis G.A. Melo, M.Sc., McMaster University;
Julia Huang, McMaster University;
Zhisheng Qin, MSc, McMaster University;
Vincent Lee, McMaster University;
Darija Susac, PhD, Automotive Fuel Cell Cooperation Corporation;
Viatcheslav Berejnov, McMaster University;
Jürgen Stumper, Automotive Fuel Cell Cooperation Corporation;
Adam P. Hitchcock, PhD, McMaster University;
Gianluigi A. Botton, Department of Material Science and Engineering, McMaster University
257
Running Costs Evaluation of the Fuel Cell Hybrid Powertrain Using Li4Ti5O12 Battery (Cancelled)
Electrochemical and Physical Properties of La-Ion-Doped LiFePO4 Coated with Different Carbon Sources as Cathode Materials for Lithium-Ion Batteries
George Ting-Kuo Fey, Ph. D, National Central University;
Bo-Fu Chang, Master, National Central University;
Yung-Da Cho, Ph. D, National Central University;
Yi-Chuan Lin, Master, National Central University;
Kai-Pin Huang, Master, National Central University
The Improvement of Cycling Performance for Lithium-Sulfur Battery
Chun-Lung Li, Industrial Technology Research Institute;
Li-Duan Tsai, Industrial Technology Research Institute;
Chih-Ching Chang, Industrial Technology Research Institute;
Jenn-Yeu Hwang, Industrial Technology Research Institute;
Jason Fang, Industrial Technology Research Institute
Nanostructured Tin/Carbon Hybrids as Anodes in Lithium-Ion Batteries
Kristopher J. Harris, Dept. of Chemistry, McMaster University;
Dongniu Wang, Department of Materials and Mechanical Engineering, University of Western Ontario;
Xifei Li, Dept. of Mechanical and Materials Engineering, Western University;
Hanshuo Liu, Dept. of Materials Science and Engineering, McMaster University;
Gianluigi A. Botton, Department of Material Science and Engineering, McMaster University;
Xueliang (Andy) Sun, University of Western Ontario;
Gillian R Goward, McMaster University
Electrolyte Distribution and Discharge Time – A Combined Study of X-ray Tomography and Electrical Measurements of a Commercially Available Energy Storage Device
Frank Wieder, Helmholtz-Zentrum Berlin für Materialien und Energie;
Christoph Kallfaß, Dr., Goodrich Lighting Systems;
Ingo Manke, Dr., Helmholtz-Zentrum Berlin für Materialien und Energie;
André Hilger, Dr., Helmholtz-Zentrum Berlin für Materialien und Energie;
Constantin Hoch, Dr., Ludwig-Maximilian-Universität;
Herman Schier, Dr., Max-Planck-Institut für Festkörperforschung;
Klaus Graf, Max-Planck-Institut für Festkörperforschung;
John Banhart, Prof. Dr., Technische Universität Berlin
Design of Semi-Solid Flow Cell Batteries
Brandon Hopkins, Massachusetts Institute of Technology;
Christian Höcker, Massachusetts Institute of Technology;
Kyle Smith, Massachusetts Institute of Technology;
Zheng Li, Massachusetts Institute of Technology;
Victor Brunini, Massachusetts Institute of Technology;
Alexander Slocum, Massachusetts Institute of Technology;
Yet-Ming Chiang, Massachusetts Institute of Technology;
W. Craig Carter, Massachusetts Institute of Technology
Semiconductors as Selective Electrodes for Bio-Photovoltaic Cells
Ashwin R Usgaocar, University of British Columbia;
Lisheng Wang, University of British Columbia;
Ali Mahmoudzadeh, University of British Columbia;
Seyed M Mirvakili, University of British Columbia;
Joanna E Slota-Newson, University of British Columbia;
John D Madden, University of British Columbia;
J T Beatty, University of British Columbia;
Arash Takshi, University of South Florida
286
Composite Electrodes for All-Solid-State Li-Ion Batteries (Cancelled)
