Lithium Ion Batteries - Anodes I

Wednesday, May 15, 2013: 08:00-12:00
Grand Ballroom East, Lower Concourse Level (Sheraton)
Chairs:
Yun-Hui Huang and Mariappan Parans Paranthaman, Ph.D.
08:00
186
Enhanced Electrochemical Performance of SnO2 Anode Material for Lithium-Ion Battery Via Fluorine Doping and C60 Coating
Chairul Hudaya, Department of Energy and Power Conversion Engineering, University of Science and Technology, Republic of Korea; Ji Hun Park, Energy Convergence Research Center, Green City Research Institute, KIST, Republic of Korea; Wonchang Choi, Department of Energy and Power Conversion Engineering, University of Science and Technology, Republic of Korea; Joong Kee Lee, Department of Energy and Power Conversion Engineering, University of Science and Technology, Republic of Korea
08:20
187
In-Situ XRD Investigation of Insertion and Extraction Mechanisms of Lithium in Nanoscaled Gold Thin Films
Philipp Bach, Max-Planck-Institut für Eisenforschung; Andreas Seemayer, Max-Planck-Institut für Eisenforschung; Frank Uwe Renner, Max-Planck-Institut für Eisenforschung; Uta Rütt, DESY Hamburg; Olof Gutowski, DESY Hamburg
08:40
188
Reduction of Full Cell Impedance by Dissolving Degradation Films
Stephen J Harris, Lawrence Berkeley National Lab; Peng Lu, Ph.D in Chemistry, General Motors R&D Center; Chen Li, ., Zee. Aero Inc
09:00
189
Synthesis and Characterization of Graphene Nanosheets as Electrode for Li-Ion Storage Applications
Wook Ahn, Korea Institute of Energy Research; K. B. Kim, Yonsei University; Chang-Soo Jin, Korea Institute of Energy Research; Kyoung-Hee Shin, Ph.D., Korea Institute of Energy Research
09:20
190
Functionalized 3D Porous Carbon as Anode for High-Performance Lithium-Ion Batteries
Long Qie, Huazhong University of Science and Technology; Wu-Xing Zhang, Huazhong University of Science and Technology; Li-Xia Yuan, Huazhong University of Science and Technology; Yun-Hui Huang, Huazhong University of Science and Technology
09:40
Intermission
10:00
191
Low-Cost Silicon Alloy with an Inactive Matrix as an Anode Material for Lithium-Ion Batteries
Yohan Park, Samsung SDI Co., Ltd.; Changui Jeong, Samsung SDI Co., Ltd.; Seunguk Kwon, Samsung SDI Co., Ltd.; Yury Matulevich, Samsung SDI Co., Ltd.; Youngugk Kim, Samsung SDI Co., Ltd.; Jaehyuk Kim, Samsung SDI Co., Ltd.; Soonsung Suh, Samsung SDI Co., Ltd.; Yongchan You, Samsung SDI Co., Ltd.; Sunho Kang, Ph.D., Samsung SDI Co., Ltd.
10:20
192
Electrochemical Properties of Restacked Graphene Sheets as an Anode Material for Lithium-Ion Batteries
Wonkyun Lee, The University of Tokyo; Shinya Suzuki, The University of Tokyo; Masaru Miyayama, The University of Tokyo
10:40
193
Ultrathin Atomic Layer Deposited ZrO2 Coating to Enhance the Electrochemical Performance of Li4Ti5O12 as an Anode Material
Jian Liu, Dept. of Mechanical and Materials Engineering, Western University; Xifei Li, Dept. of Mechanical and Materials Engineering, Western University; Mei Cai, General Motors Research & Development Center; Ruying Li, University of Western Ontario; Xueliang Andy Sun, Dept. of Mechanical and Materials Engineering, Western University
11:00
194
C/Fe3O4 Composite as a Negative Electrode for Rechargeable Secondary Batteries
Dae-Yeop Park, Sejong University; Sun-Jae Kim, Dr., Sejong University; Seung-Taek Myung, Dr., Sejong University
11:20
195
Fabrication and Electrochemical Properties of Sn/TiO2 Nanowire Array Composites as Li-Ion Battery Anodes
Zhen Wei, Fudan University; Tao Huang, Ph. D, Fudan University; Aishui Yu, Ph.D, Fudan University
11:40
196
Influence of Flake/Potato Graphite Particle Ratio On SEI Formation and Negative Electrode Performance in Lithium-Ion Batteries
Sarine Chhor, CEA/INAC; Sophie Mailley, Dr., CEA Grenoble; Eric De Vito, CEA/LITEN; Pascal Mailley, Dr., CEA Grenoble; Gerard Gébel, Dr., CEA/INAC