Cathode II

Tuesday, October 13, 2015: 08:00-12:00
105-A (Phoenix Convention Center)
Chairs:
Jagjit Nanda and Hikari Sakaebe
08:00
438
(Invited) Advances in Cathode Materials for High Energy Density Lithium-Ion Batteries
J. Nanda (Oak Ridge National Laboratory)
08:30
439
Structural Ambiguity in Li- and Mn-Rich Transition Metal Oxides: Trigonal, Monoclinic, or Both?
A. K. Shukla (Energy Storage and Distributed Resources Division,LBNL), Q. Ramasse (SuperSTEM), C. Ophus (NCEM, Molecular Foundry, LBNL), H. Duncan (Kinestral Technologies), G. Chen (Energy Storage and Distributed Resources Division, LBNL), and U. Dahmen (NCEM, Molecular Foundry, LBNL)
08:50
440
Structural Evolution of High Capacity Li-Rich 0.5Li2MnO3*0.5LiMO2 (M=Mn, Ni and Co) Cathode Materials during Electrochemical Cycling
J. Rana (Helmholtz-Zentrum Berlin für Materialien und Energie), R. Kloepsch (MEET Battery Research Center, University of Muenster), J. Li (MEET Battery Research Center), G. Schumacher, M. Winter (MEET Battery Research Center, University of Muenster), and J. Banhart (Helmholtz-Zentrum Berlin für Materialien und Energie)
09:10
441
Layered Cathode Materials with Controlled Particle Assembly for High Energy Lithium-Ion Batteries
F. Lin (Lawrence Berkeley National Laboratory), Y. Li (Lawrence Berkeley National Laboratory), D. Nordlund (Stanford Synchrotron Radiation Lightsource), Y. Liu (SLAC National Accelerator Laboratory, USA), T. C. Weng (SLAC National Accelerator Laboratory), H. Xin (Brookhaven National Laboratory), and M. Doeff (Lawrence Berkeley National Laboratory)
09:30
442
Degradation Mechanism of Nickel Manganese Cobalt Oxide-Type Commercial Lithium-Ion Cells By Long-Term Cycle Tests
T. Matsuda, K. Ando (Japan Automobile Research Institute), M. Myojin (Japan Automobile Research Institute), M. Matsumoto (Device-functional analysis Department, NISSAN ARC Ltd.), T. Sanada, N. Takao (Device-functional analysis Department, NISSAN ARC, Ltd.), H. Imai (Device-functional analysis Department, NISSAN ARC Ltd.), and D. Imamura (Japan Automobile Research Institute)
09:50
Break
10:10
443
(Invited) Surface Modification Effect on the First Charging Process over 4.5 V and the Enhancement of Energy of LiNi1/3Co1/3Mn1/3O2
H. Sakaebe, A. Yano (AIST), M. Shikano (AIST), and Z. Ogumi (Kyoto University)
10:40
444
High-Voltage, Lithium-Ion Research for Transportation Applications
J. R. Croy, K. G. Gallagher, S. G. Rinaldo (Argonne National Laboratory), B. R. Long, M. Balasubramanian (Advanced Photon Source, Argonne National Laboratory), J. S. Park, F. Dogan, Z. Yang, E. Lee (Argonne National Laboratory), and A. K. Burrell (Argonne National Laboratory)
11:00
445
Composite "Layered-Layered-Spinel" Electrodes for High Energy Lithium-Ion Batteries
J. S. Park, J. R. Croy, B. R. Long, E. Lee (Argonne National Laboratory), and M. M. Thackeray (Argonne National Laboratory)
11:20
446
Synthesis of LiCoO2 and LiNi1/3Mn1/3Co1/3O2 2D Nanosheets By Osmotic Swelling for High Performance Lithium-Ion Batteries
Q. Cheng (Arizona State University) and C. K. Chan (Arizona State University)
11:40
447
Investigating Synthetic Effects on Ni-Based Oxide As a Cathode Material for Li-Ion Batteries
J. Xu (Lawrence Berkeley National Laboratory) and W. Tong (Lawrence Berkeley National Laboratory)
See more of: A06: High-Energy Li-Ion Intercalation Materials
See more of: Batteries and Energy Storage
<< Previous Session | Next Session >>