Surface Engineering for Corrosion Protection

Tuesday, 15 May 2018: 14:00-17:20
Room 305 (Washington State Convention Center)
Chairs:
Jeffrey Fergus and Paul Gannon
14:00
(Invited) Developing Environmental Barrier Coatings Resistant to Molten Calcium-Magnesium-Aluminosilicate (CMAS)
V. L. Wiesner, B. J. Harder (NASA Glenn Research Center), A. Garg (NASA Glenn Research Center, University of Toledo), and N. P. Bansal (NASA Glenn Research Center)
15:00
EBSD Study of 55 Wt.% Al-Zn Coating and Corrosion Behavior Effected by Austenitization Heat Treatment
J. K. Chang, T. C. Yang, and C. S. Lin (National Taiwan University)
15:20
Hot Corrosion Behavior of Multilayered Titanium Aluminum Carbide/Yttria-Stabilized Zirconia Coatings for Silicon Carbide
M. McCleary, R. Amendola, Z. Benedict (Montana State University), and J. L. Smialek (NASA Glenn Research Center)
15:40
Break
 
1132
Thermal, High and Low Cycle Fatigue Life of 80 Micron Thick Graded Alumina PVD Coatings for Oxidation Resistance Application (Cancelled)
16:20
Formation Process and Stability of Co-W Oxide from an Electroplated Co-W Alloy Coating at 1000 °C for Cr-Based Steels
L. Gan, H. Murakami (National Institute of Materials Science, Waseda University), and I. Saeki (Muroran Institute of Technology)
16:40
Low Cost Corrosion and Oxidation Resistance Coatings for Improved System Reliability
J. Xu, T. D. Hall, S. Snyder, M. Inman, E. J. Taylor (Faraday Technology, Inc.), and Y. Zhang (Tennessee Technological University)
17:00
Effect of the Composition of Co-W Oxide Conversion Layer on the Cr-Diffusion Barrier Property for SOFC Interconnect
I. Saeki (Muroran Institute of Technology), L. Gan, and H. Murakami (Waseda University)