Lithium-Ion Anode 2

Wednesday, 16 May 2018: 08:40-12:00
Room 608 (Washington State Convention Center)
Chairs:
Wenquan Lu , Stephen E. Trask and Claire Xiong
09:00
456
In-Situ Diagnostics of Coupled Electrochemical-Mechanical Failures of Solid Electrolyte Interphases on Lithium Metal for Rechargeable Batteries
X. Xiao (General Motors, R&D Center), J. Xu, B. Li (General Motors R&D Center), and Q. Zhang (General Motors)
09:20
457
Extending Lifespan of Lithium Metal Electrodes Via Surface Structure Regulation Strategies
Z. Peng, Z. Zhang, M. Wang, F. Ren (Ningbo Institute of Industrial Technology.), and D. Wang (Ningbo Institute of Material Technology and Engineering.)
09:40
458
Silicon-Tin Sputtered Anodes for Solid-State Lithium-Ion Batteries
H. Oh (University of Colorado) and S. Lee (University of Colorado at Boulder)
10:00
459
Low-Cost and High-Performance Anode in Li Ion Batteries with Si Nanopowder Fabricated from Swarf
T. Matsumoto (ISIR. Osaka University), K. Kimura (ISIR. Osaka Univ.), and H. Kobayashi (ISIR, Osaka University)
10:20
460
Capacity Fading Mechanism of Silicon Monoxide As the Anode for Lithium-Ion Batteries
L. Zhang, Y. Qin (Argonne National Laboratory), Y. Liu (Center for Nanoscale Materials), Q. Liu (Argonne National Laboratory), Y. Ren (Advanced Photon Source, Argonne National Laboratory), and W. Lu (Argonne National Laboratory)
10:40
461
Lithiation Effect of the Poly(Acrylic Acid) Binders on the Silicon Anode of Lithium-Ion Batteries
B. Hu (Argonne National Laboratory), S. Jiang (University of Tennessee, Knoxville, Argonne National Laboratory), J. Zhang, Z. Zhang, and L. Zhang (Argonne National Laboratory)
11:00
Break