M02 - Printed and Wearable Sensors and Systems

Sunday, 9 October 2022: 13:00-17:20
Chairs:
Jessica E. Koehne , Dong-Joo Kim , Lok-kun Tsui and Larry A. Nagahara
13:00
Soft Wearable Biosensors and Bioelectronics for Human Healthcare
W. H. Yeo (Georgia Tech)
13:40
Inkjet Electrodes for Developing Wearable Sensors for the Detection of Peptides and Neurotransmitters in Sweat Using Flexible Materials
A. Vázquez, J. Diaz, E. Vazquez (Universidad Ana G. Mendez), L. Acosta (Universidad Ana G Mendez), and L. Cunci (Ana G. Mendez University, Gurabo Campus)
14:00
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
A. Alsharif (King Abdullah University of Science and Technology), N. Cucuri (King Abdullah University of Science and Technology, Yachay Tech Universiy), L. Dakhaikh (King Abdullah University of Science and Technology), F. Al-Modaf (King Abdullah University of Science and Technology, King Abdulaziz University), and N. El-Atab (King Abdullah University of Science and Technology)
14:20
Furaneol Detection with Molecularly Imprinted Polymer (MIP)-Based Polyaniline (PANI) Gas Sensor
W. Kim, D. Lee, G. Wu (Materials Research and Education Center, Auburn University), Y. Cha (Department of Materials Engineering, Auburn University, Auburn University), S. Cho (Department of Poultry Science, Auburn University), and D. J. Kim (Department of Materials Engineering, Auburn University, Auburn University)
14:40
Exploiting the Versatility of 3D Printing Towards Point-of-Care Sensing
D. L. Glasco, N. H. B. Ho, and J. G. Bell (Washington State University)
15:00
Portable Mixed Potential Sensors for Natural Gas Emissions Monitoring
S. Halley, L. K. Tsui, K. Ramaiyan (University of New Mexico), K. Agi (SensorComm Technologies, Inc.), and F. H. Garzon (University of New Mexico)
15:20
Wearable Conductive Polymer Matrix Composites for Breath Monitoring with Ammonia Detection
G. Wu (Department of Materials Engineering, Auburn University), H. Du (Department of Chemical Engineering, Auburn University), D. Lee, W. Kim, Y. Cha (Department of Materials Engineering, Auburn University), X. Zhang (Auburn University), and D. J. Kim (Department of Materials Engineering, Auburn University)
15:40
Break
16:00
Dry Patch Detection and Intelligent Irrigation Using Drone Aided Thermal Mapping
H. M. Jalajamony, S. Ajala, K. Chambers, D. Jones, J. Battle, P. F. Mead, and R. E. Fernandez (Norfolk State University)
16:20
Harnessing Wide-Range, Highly Stable Pressure Sensitivity Via PEDOT-Cl Vapor Printed Textiles for Health Monitoring
S. Z. Homayounfar, A. Kiaghadi, D. Ganesan, and T. L. Andrew (University of Massachusetts Amherst)
16:40
Development of a Minimally Invasive Microneedle-Based Biosensor for the Continuous Monitoring of Lactate Concentrations In Vivo
S. Jangam, S. A. N. Gowers, D. K. Ming, R. C. Wilson, M. G. Boutelle, A. H. Holmes, A. E. G. Cass, and D. O'Hare (Imperial College London)
17:00
A Low-Modulus, Soft and Stretchable Wearable Electrocardiography Sensor-System Patch
A. Zhang, A. Tessier, C. M. Williams (Queen's University), and S. K. Ameri (Queen's Univeristy)
See more of: M02: Printed and Wearable Sensors and Systems 2
See more of: Sensors
<< Previous Session | Next Session >>