A01 - Lithium Battery

Thursday, 13 October 2022: 08:00-12:20
Room 224 (The Hilton Atlanta)
Chairs:
Jung-Hyun Kim , Bharat Gattu and A Manivannan
08:00
Tapping the True Potential of Carbon By Stabilized Li Plating: High Gravimetric / Areal Capacity Systems
B. Gattu, B. Day, P. Thanapisitikul, P. M. Vasandani, R. Epur (University of Pittsburgh), and A. Manivannan (West Virginia University)
08:20
Influence of the Substrate on Lithium Deposition and Dissolution for “Anode Free” Li-Metal Batteries
I. Genov (TU Ilmenau), A. Tesfaye (Umicore), S. Ivanov, M. Kurniawan, and A. Bund (TU Ilmenau)
08:40
Effect of Post-Synthesis Processing on the Electrochemical Performance of Y2W3O12 in Lithium-Ion Batteries
U. Mittal (School of Chemistry, UNSW Sydney), D. Kundu (School of Chemical Engineering, UNSW Sydney), and N. Sharma (University of New South Wales)
09:00
Quantitative Phase Field Modeling of Li Dendrite Growth
J. Zhang, A. F. Chadwick, and P. W. Voorhees (Northwestern University)
09:20
Mechanically Reinforced Ionogel Membranes via Layer-By-Layer Assembly Strategy for High Performing Lithium Metal Batteries (LMBs)
B. Prasad Thapaliya, Z. Wang (Oak Ridge National Laboratory), B. Adigun (University of Tennessee), and S. Dai (Oak Ridge National Laboratory)
09:40
Break
10:00
Cold Sintering–a New Approach to Reprocess Composite Electrolytes in All-Solid-State Lithium-Ion Battery
Y. C. Lan and E. D. Gomez (The Pennsylvania State University)
10:20
Impact of the Sulfur Loading Method on the Morphological and Electrochemical Properties of Additive-Free Cathodes for Li-S Batteries Prepared By Composite Electroforming
W. El Mofid and T. Soergel (Aalen University)
10:40
Initiated Chemical Vapor Deposited Anion-Conducting Solid-State Polymeric Electrolytes for All Solid-State Batteries: Impacts of Deposition Conditions and Polymer Composition on Performance Metrics
H. Ford, B. Chaloux, J. Miller, C. Klug, J. W. Long, Y. Kim, B. Jugdersuren, X. Liu, R. H. DeBlock, M. D. Johannes, D. R. Rolison, and M. B. Sassin (U.S. Naval Research Laboratory)
11:00
Ultra-Thick Electrodes Utilizing Short Diffusion Path Via Novel Micro-Casting Process for Lithium-Ion Batteries
T. P. Plateau, H. Pham, Y. Zhu, and J. Park (Missouri University of Science and Technology)
11:20
The Scanning Droplet Cell System As High-Throughput Technique for Non-Aqueous Li-Based Batteries Research
D. Muñoz-Torrero Castaño (International Research Centre in Critical Raw Materials-ICCRAM), C. Santana Santos (Ruhr-Univesität Bochum), W. Schuhmann (Ruhr Universitaet Bochum), and E. Ventosa (International Research Centre in Critical Raw Materials-ICCRAM)
11:40
Importance of Electrified Interfaces in Researchable Metal Anode Batteries: Ionic Liquid Electrolyte Composition and Electrode Preconditioning
D. Rakov (The University of Queensland)
12:00
Resisting Dendrites in Lithium Batteries, One Pinhole at a Time
S. Oyakhire, W. Zhang, Y. Cui, and S. F. Bent (Stanford University)
See more of: A01: New Approaches and Advances in Electrochemical Energy Systems
See more of: Batteries and Energy Storage
<< Previous Session | Next Session >>