A06 - Materials Manufacturing

Monday, 10 October 2022: 13:00-15:50
Room 219 (The Hilton Atlanta)
Chairs:
Wilhelm Pfleging and Georgios Polizos
13:00
(Invited) 3D Electrode Architectures for High Power and High Energy Lithium-Ion Battery Operation - Recent Approaches and Process Upscaling
W. Pfleging, P. Smyrek, Z. Yijing, U. Rist, Y. Sterzl, A. Meyer, and P. Zhu (Karlsruhe Institute of Technology, Institute for Applied Materials)
13:30
Material and Processing Challenges in the Development of Nickel-Rich Lithium-Ion Battery Cathode Materials
N. Muralidharan (Oak Ridge National Laboratory), R. Essehli (Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, US), M. Dixit (Oak Ridge National Laboratory), R. Amin, and I. Belharouak (Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, US)
13:50
Effect of Humidity on the Electrical Response of Interdigitated Circuit Patterns
R. Titus, R. Gerhardt (Georgia Institute of Technology), and J. E. Fowler (Sandia National Laboratories)
14:10
Impact of Sulfate Adsorption on Particle Morphology during Precipitation of Ni-Rich Precursors for Li-Ion Cathode Active Materials
R. B. Berk (BASF SE, Technical University of Munich), T. Beierling, L. Metzger (BASF SE), and H. A. Gasteiger (Technical University of Munich)
14:30
Structured Cathodes Enabled By Freeze Tape Casting for High Energy Density/High Power Li Ion Batteries
G. Polizos, R. Tao, and J. Li (Oak Ridge National Laboratory)
14:50
Dependence of Electrochemical Performance of LiNi0.5Mn1.5O4 Cathodes on Electrode Morphology for High Voltage Lithium Ion Battery Applications
H. Cavers (Technische Universität Braunschweig, Institut für Partikeltechnik), J. K. Mayer (Technische Universität Braunschweig), and A. Kwade (TU Braunschweig)
15:10
Benefits of Tuned Binder Distribution in Multi-Layered Thick NMC811 Cathodes
L. Neidhart (AIT Austrian Instiotute of Technology GmbH, TU Wien), K. Fröhlich (AIT Austrian Institute of Technology GmbH), F. Winter (TU Wien), and M. Jahn (AIT Austrian Institute of Technology GmbH)
15:30
Relating Surface Topography to Impedance Behavior in Solder Mask Coated Circuit Boards
M. Rath, R. Gerhardt (Georgia Institute of Technology), and J. E. Fowler (Sandia National Laboratories)
See more of: A06: Manufacturing in Electrochemistry
See more of: Batteries and Energy Storage
<< Previous Session | Next Session >>