A03 Li-ion Cathode 1

Wednesday, 12 October 2022: 08:00-13:00
Galleria 8 (The Hilton Atlanta)
08:00
High-Performance LiNiO2: A New Baseline for State-of-the-Art Ni-Rich Cathodes
E. Lee, J. Gim, J. Han, O. Kahvecioglu (Argonne National Laboratory), C. Wang, P. Zuo (Pacific Northwest National Laboratory), F. Dogan (Argonne National Laboratory), J. Garcia (ANL), H. Iddir, and J. R. Croy (Argonne National Laboratory)
08:40
Origin of Structural Degradation in Li-Rich Layered Oxide Cathode
T. Liu and K. Amine (Argonne National Laboratory)
09:20
Surface Modification as a Key Factor for Spherical, Co-Free, High Capacity Li-Mn-Rich Layered Materials - from Small into the Kg Scale
F. Klein, C. Pfeifer (Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)), M. Lindén (Institute for Inorganic Chemistry II, Ulm University), M. Wohlfahrt-Mehrens, and P. Axmann (Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW))
09:40
Advances in the Aqueous Processing of Ni-Rich Positive Electrodes
S. Radloff, G. Carbonari, R. G. Scurtu, M. Hölzle, and M. Wohlfahrt-Mehrens (Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW))
10:00
coffee break
10:20
Recent Advances Towards Practical LiNiO2 Cathode Materials: Optimised Calcination and Modification with W Via a Single Step Synthesis Route
M. Bianchini (BASF SE, University of Bayreuth), D. Goonetilleke (BELLA, Karlsruhe Insitute of Technology), D. Weber (BELLA, Karlsruhe Institute of Technology), F. Fauth (CELLS−ALBA Synchrotron), Y. Ma (BELLA, Karlsruhe Institute of Technology), A. Mazilkin (Karlsruher Institut fuer Technologie), F. Riewald, P. Kurzhals (BASF SE), H. Sommer (Cellforce group), H. A. Gasteiger (Technical University of Munich), T. Brezesinski (Karlsruhe Institute of Technology), and J. Janek (Institute of Physical Chemistry, Justus-Liebig-University Giessen, Karlsruhe Institute of Technology)
11:00
Performance Optimization of High Ni (≥90%) Cathode Materials: Synthesis & Modification
J. Gim, J. Han, O. Kahvecioglu (Argonne National Laboratory), P. Zuo, L. Zou (Pacific Northwest National Laboratory), F. Dogan, A. U. Mane, P. Darapaneni (Argonne National Laboratory), C. Wang (Pacific Northwest National Laboratory), J. W. Elam (Applied Materials Division, Argonne National Laboratory), E. Lee, K. Amine, and J. R. Croy (Argonne National Laboratory)
11:20