C01 - Corrosion Protection

Wednesday, 12 October 2022: 14:00-17:00
Room 307 (The Hilton Atlanta)
Chairs:
Masayuki Itagaki and Rebecca Filardo Schaller
14:00
Investigation of Microstructure Dependent Inhibitor Adsorption Mechanism on Carbon Steel By in Situ Atomic Force Microscopy
H. Wang (Institute for Corrosion and Multiphase Technology), B. N. Brown (Institute for Corrosion and Multiphase Flow Technology), A. Pailleret (Laboratoire Interfaces et Systèmes Electrochimiques), and S. Nesic (Institute for Corrosion and Multiphase Technology, Ohio University)
14:20
Anti-Corrosive and Anti-Bacterial Polymeric Coatings Consisting of PCL and Lawsone
H. Asadi, A. Duncan, and R. Ramasamy (University of Georgia)
14:40
Al-Rich Primer for Al Alloy: Electrochemical and Computational Investigation
V. Upadhyay, J. Mendez, S. Palani, K. Legg, and A. Rose (Corrdesa LLC)
15:20
The Adhesion of Protective Coatings to Novel Trivalent Cr Metal / Cr Oxide Coatings Used for Packaging Applications
M. Dodd, E. Jewell, N. Wint (Swansea University), and A. de Vooys (Tata Steel Europe)
15:40
Break
16:00
Ultra-Fast Zinc Phosphate Coatings Obtained By Pulsed Electrochemical Deposition
F. Lissandrello and L. Magagnin (Politecnico di Milano)
16:20
Binary Sacrificial Coatings for Internal Corrosion Protection of Natural Gas Transmission Pipelines
Z. Belarbi, O. Dogan, L. Teeter (U.S. Department of Energy, National Energy Technology Laboratory), and R. E. Chinn (National Energy Technology Laboratory: Albany, OR, US)
16:40
The Role of Mg in Cut-Edge Corrosion Protection of 55 Mass% Al-Zn-Mg Coated Steel Under a Wet-Dry Cyclic Condition
Y. Sugawara (Tohoku University), K. Ebina (Department of Materials Science, Tohoku University), T. Suga (Tohoku University), T. Fujii, and K. Ueda (Nippon Steel Corporation)