Recently, lithium metal has been extensively researched as anode candidate for secondary batteries due to its lowest redox potential and highest specific capacity among metallic anodes. Despite these promising properties, lithium sources are relatively limited and unevenly distributed across the globe, which lead to high costs of lithium metal batteries. Therefore, inevitably, lithium-based batteries will become unaffordable and large-scale production will falter. Therefore, sodium (Na) is one of the promising alternatives to lithium for energy storage technologies because of its relatively high theoretical specific capacity of 1166 mAh g-1 and natural abundance. Also, it has comparable redox potential, that is -2.70 V vs. SHE. However, like lithium metal anode, inhomogeneous electrochemical deposition of Na is a crucial problem that have to be solved for the usage of sodium metal as anode safely. Furthermore, Na metal has extremely high reactivity with liquid organic electrolyte, so high interfacial resistance could be induced due to continuous electrolyte decomposition during battery cycling, which also leads to earlier cell failure.
In this research, we present a stabilized sodium electrode by introducing electrically connected carbon network (ECN) to a bulk Na electrode with a simple folding & rolling method. As a results of introducing ECN, we observed that a cell overpotential was decreased as the amount of ECN inside bulk Na metal was increased. Also, we found that the cycling stability of Na/Na symmetric cell with ECN was almost 4.5 times increased compared to bare Na/Na cell, which is consistent with the results of EIS during cycling. By using SEM and CA analysis, we confirmed that an introduced ECN could act as not only an electrical network but also artificial uniform seed for Na nucleation.