Topic 3: Battery Safety I

239

High Performance Separator Coated with Amino-Functionalized SiO₂ Nanoparticles for Safety Enhanced Lithium-Ion Battery

J. Cho, W. K. Shin, A. G Kannan, and D. W. Kim (Department of Chemical Engineering, Hanyang University)

240

Safety Technology for Li-Ion Batteries

J. C. Lo, C. C. Chen, J. M. Hsu, C. R. Yang, H. C. Wu, and J. P. Pan (Industrial Technology Research Institute)

241

Low-Cost Manufacturing of Safe, Long-Life Battery Materials Using Atomic Layer Deposition

D. M. King, J. E. Trevey, P. R. Lichty (PneumatiCoat Technologies), S. J. Cho (Joint School of Nanoscience and Nanoengineering), K. Dahlberg (Energy Power Systems, LLC), and F. Albano (XALT Energy, LLC)

242

Study on the Lithium Plating and Dissolution Behavior on Anode of Lithium Ion Battery

K. Qian (Graduate school at Shenzhen, Tsinghua Univeristy), Y. Li, D. Luo, B. Li, D. Liu, Y. B. He, and F. Kang (Graduate School at Shenzhen, Tsinghua University)

243

Applications of Calorimetry to Safety and Performance Testing of Lithium Batteries

J. Rachford and D. Montgomery (Thermal Hazard Technology)

244

Thermophysical Properties of Positive Electrode of Lithium-Ion Batteries

Y. Saito and H. Kobayashi (AIST)

245

Safety of Li-Ion Batteries - Early Detection of Anomalies and Characterization of Their Origins

L. Daniel, S. Geniès, D. Brun-Buisson, J. F. Martin, X. Fleury, and C. Chabrol (CEA, LITEN, F-38054 Grenoble, France)

246

Exploiting Steric Factors in the Design of New Overcharge Additives

T. F. Guarr (Michigan State University Bioeconomy Institute, Jolt Energy Storage Technologies, LLC), N. Mortimer, A. J. Prins, and R. Polik (Michigan State University Bioeconomy Institute)

247

Lithium Ion Battery Autopsies after Safety Testing Reveal Safety Benefits of Thermally Stable Separators

B. Morin (Dreamweaver International, Inc.), J. Kaschmitter, P. Khokhlov (Spectra Power), C. Hu (Paris Mountain LLC), and S. J. Cho (North Carolina A&T State University)

248

A Research Tool to Evaluate Safety Response of Lithium Batteries to Internal Short Ciurcuit

A. Pesaran and M. Keyser (National Renewable Energy Laboratory)

249

A Low-Cost, Environment-Friendly Lignin-Polyvinyl Alcohol Composite Separator Using a Water-Based Method for Safer and Faster Li-Ion Batteries

M. J. Uddin, P. K. Alaboina, L. Zhang, and S. J. Cho (Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University)

250

On-Demand Internal Short Circuit Device Reveals Li-Ion Cell Design Vulnerabilities and Enables Verification of Safer, Higher Performing Battery Designs

E. Darcy (NASA-Johnson Space Center)

251

Implications of Material Reponse for Battery Safety (Cancelled)

252

Introduction of Square-Current Electrochemical Impedance Spectroscopy (SC-EIS) to Battery Assessment System of Kw-Class Lithium Ion Battery System

T. Osaka, T. Yokoshima (Waseda University), D. Mukoyama (Research Organ. for Nano & Life Innovation, Waseda Univ.), H. Nara, H. Isawa, T. Momma, and Y. Mori (Waseda University)

253

Innovative Non-Destructive Non-Contact Methods & Devices for Testing during Production, Optimizing Technologies, and Insuring Safety & Reliability Next Generation of Li Batteries (Cancelled)

254

Battery Materials Exploration with Neutrons and Synchrotron X-Rays

Y. Ren (Argonne National Laboratory, Advanced Photon Source), C. J. Sun (Argonne National Laboratory), K. An (Oak Ridge National Laboratory), Z. Chen, X. Xiao, B. Aoun (Argonne National Laboratory), and K. Amine (Chemical Sciences/Engineering Division, ANL)

255

Effect on Electrochemical Property of LiNi_1/3Co_1/3Mn_1/3O₂ By AlPO₄ Nano-Coating (Cancelled)

256

A Flame Retardant Gel Polymer Electrolyte Containing Mg(OH)₂ Particles for Lithium Ion Battery

S. Kim (Hanbat National University), J. Jeong (ENCHEM Co.,Ltd.), H. Lee, T. Han, D. Jin, M. H. Ryou, and Y. M. Lee (Hanbat National University)

257

Successful Early Detection of Incipient Internal Short Circuits in Li-Ion Batteries and Prevention of Thermal Runaway (Cancelled)

258

Application of Phase Change Materials for the Safety and Thermal Management of the Lithium-Ion Batteries at High Temperature Climate Conditions (Cancelled)

259

Influence of Aging on Heat-Release of Lithium Ion Battery Under Adiabatic Conditions (Cancelled)

260

Effect of Aging on Overcharge Behavior of the Lithium Ion Battery (Cancelled)