C1 Corrosion Poster Session

Wednesday, May 14, 2014: 18:00-20:00
Grand Foyer, Lobby Level (Hilton Orlando Bonnet Creek)
R. Buchheit
Corrosion Studies of Austenitic and Ferritic Stainless Steels in Solution Containing Chloride Ions
T. F. Soares (Federal University of Espírito Santo), R. R. Moreira (Universidade Federal do Espírito Santo), A. R. de Andrade (Universidade de São Paulo), and J. Ribeiro (Federal University of Espírito Santo)
The Consequence of Stress Intensity on Faigue Crack Propagation in High-Strength Steels in Sour Environmet
M. Ziomek-Moroz, J. A. Hawk, K. Collins (U.S. Department of Energy, National Energy Technology Laboratory), R. Thodla, and F. Gui (DNV USA)
Effect of Ca and Y on the Oxidation of Mg Alloys
D. Lee, P. Yadav, M. A. Abro, and M. KIM (Sungkyunkwan University)
Effect of Some New Organic Polymers As Green Corrosion Inhibitors for Metals in Different Media
F. Branzoi (Institute of Physical Chemistry), V. Branzoi (University Politehnica of Bucharest), and A. Stanca (Energy Research and Modernizing Institute)
Electrochemical Synthesis of Bilayer Coatings of New Polymer Composite for Carbon Steel Corrosion Protection
F. Branzoi, C. Pacuretu (Institute of Physical Chemistry), and R. Branzoi (University Politehnica of Bucharest)
Electrodeposition of Cu-Ni Incorporated with Layered Silicates for Microbial Corrosion Protection
C. R. Thurber, M. C. Calhoun (University of North Texas, Department of Chemistry), Y. H. Ahmad (Qatar University, Center for Advanced Materials), N. D'Souza (University of North Texas, Department of Mechanical and Energy Engineering), A. Mohamed (Qatar University, Center for Advanced Materials), and T. D. Golden (University of North Texas, Department of Chemistry)
Anodic Behavior of Aluminum in Glycine Aqueous Solutions at Various pH Values
S. Kaluzhina, T. Minakova, and Y. Sokolov (Voronezh State University)
Corrosion in Construction Materials
A. Marquez (University of West Indies)
Effect of Surface Morphology on the Corrosion of Electroless Nickel/Immersion Gold Films
D. J. Lee (Samsung Electro-Mechanics Co., LTD.), J. S. Ha (Faculty of Applied Chemical Engineering, Chonnam National University), H. S. Chu (Department of Materials Science and Engineering, Dong-A University), and H. J. Lee (Department of Materials Science and Engineering Dong-A University)