A03 Monday Poster Session

Vaughey, John

322

(A03 Best Poster Winner) In Situ Study of the Reaction Mechanisms of Tmspi and Tmspa Additives in Lithium Ion Batteries By Online Electrochemical Mass Spectrometry

C. Bolli, A. Guéguen (Paul Scherrer Institute, Electrochemistry Laboratory), M. Mendez (BASF SE), and E. J. Berg (Paul Scherrer Institute, Electrochemistry Laboratory)

323

Investigation of Degradation Pathway in High Ni-Content Cathode Materials at Primary and Secondary Particle Level By Multi-Scale Characterization

R. Lin (CFN, Brookhaven National Laboratory), S. M. Bak, H. S. Lee, X. Q. Yang (Chemistry Division, Brookhaven National Laboratory), and H. L. Xin (CFN, Brookhaven National Laboratory)

324

Graphene Induced Growth of Single Crystalline Sb₂MoO₆ Sheets and the Sodium Storage Performance

Q. Liu (Huazhong University of Science and Technology)

325

Microstructure Evolution in “Li-Free” Thin Film Solid-State Li-Ion Batteries

H. Yang, M. A. Citrin, X. Xia (California Institute of Technology), S. Nieh (Front Edge Technology, Inc.), and J. R. Greer (California Institute of Technology)

326

Process Development for Thin Film Solid State Battery on Four Inch Wafer Using Glove Box Attached Custom Built Single Chamber PVD System (Cancelled)

327

Solid-State Stretchable Fabric-Based Lithium Ion Battery

B. Moradi Ghadi (University of Houston) and H. Ardebili (Univeristy of Houston)

328

Highly Durable Sulfur Impregnated Distorted Carbon Nanotubes for Sodium Ion Battery

P. S. Ramaprabhu, V. K. S. Ajay Piriya, G. M. Seshadhri, R. Chandrabhan Shende (Indian Institute of Technology Madras), R. Dharavath, S. Biswas, S. Loganathan, T. S. Balasubramanian, and K. Rambabu (RCI)

329

Nanostructured Metal Chalcogenide Networks As Carbon- and Binder-Free Cathode Materials for Li, Na, and Al-Ion Batteries

C. Hawkins and L. Whittaker-Brooks (University of Utah)

330

Bio-Inspired Surface Layer for the Cathode Material of High-Energy Density Sodium-Ion Batteries

C. H. Jo and S. T. Myung (Sejong University)

331

Exfoliated Transition Metal Dichalcogenide Nanosheets for Sodium Ion Batteries and Supercapacitors (Cancelled)

332

A Binder-Free Snowflake Grown Microcube Prussian Blue Particles As Possible Electrode for Supercapacitor and Sodium Ion Battery Applications (Cancelled)

333

(A03 Best Poster Winner) Chemically Preintercalated Bilayered Vanadium Oxides As Novel Cathode Materials for High Capacity K-Ion Batteries

M. Clites and E. Pomerantseva (Drexel University)

334

M-N-Doped Carbon Nanofibers Modified Separators for Lithium-Sulfur Batteries (Cancelled)

335

Abstract Withdrawn (Cancelled)

336

Applications of Carbon Nanotubes in Developing High Performance Lithium Sulfur Batteries

J. Wang (Tsinghua University, Dept. of Physics)

337

Silicon Based Anodes and New Electrolytes for Next Generation Lithium-Ion Batteries and Lithium-Sulfur Batteries

A. Baasner (Technical University of Dresden), M. Piwko, S. Doerfler, H. Althues (Fraunhofer Institute for Material and Beam Technology), and S. Kaskel (Technical University of Dresden)

338

Systematic Study of Efficient Adsorbents and Mediators for Advanced Lithium Sulfur Battery (Cancelled)

339

Carbon Nanofibers (CNFs) Coated Ni Foam As 3D Integrated Current Collector and Sulfur Host in Li-S Batteries

Z. Zeng (west virginia univerity) and X. Liu (West Virginia University)

340

Double-Nets Enclosed Sulfur Composite As a New Cathode in Lithium Sulfur Batteries (Cancelled)

341

Electrocatalysis of Polysulfide Conversion By Sulfur-Deficient MoS₂ Nanoflakes for Lithium-Sulfur Batteries

H. Lin and J. Y. Lee (National University of Singapore)

342

Spray Coated Nanorod Structured Molybdenum Oxide (MoO₃) on Celgard for Ultra-Fast and Highly Stable Next Generation Lithium-Sulfur Battery

N. Kaisar (Department of Materials Science and Engineering, NTUST, Academia Sinica), S. A. Abbas (Department of ESS, NTHU, TW), J. Diang (Guangxi University), S. Jou (National Taiwan University of Science and Technology), and C. W. Chu (Academia Sinica)

343

A First-Principles Study of Amorphous Li₂s in Lithium-Sulfur Batteries (Cancelled)

344

A New Generation of Rechargeable Aluminum Ion Battery Technology

K. L. Ng, M. Malik, and G. Azimi (University of Toronto)

345

Kinetic Surface Control for Improved Magnesium−Electrolyte Interfaces for Magnesium Batteries

R. Masse, G. Cao, and B. Li (University of Washington)

346

Comparison of the Interfacial Reaction Kinetics and Plating Morphology of Lithium and Magnesium Anodes

Y. Li (Michigan State University), Z. Liu (The Pennsylvania State University), Y. Lin (Michigan State University), Y. Yao (University of Houston), L. Q. Chen (The Pennsylvania State University), and Y. Qi (Michigan State University)

347

Towards Finding Cathode Materials for Aluminum Batteries: Kinetics and Thermodynamics of Al Ion Intercalation into Mxenes

A. VahidMohammadi and M. Beidaghi (Auburn University)

348

Enable High Initial Coulombic Efficiency for Lithium Battery Anode By Ultrathin Polymer Electrolyte Coating

S. Wang, Y. Gao, B. H. Shen, and W. Tenhaeff (University of Rochester)

349

Latex Based Emulsion Functional Conductive Polymer Binder for Si Composite Electrode (Cancelled)

350

Si Nanoparticles: Its Stability in Aqueous Slurries and the Optimization of Oxide Layer Thickness for Optimal Electrochemical Performance

L. Zhang (Argonne National Laboratory), Y. Liu (Center for Nanoscale Materials), B. Key (JCESR at Argonne National Laboratory), S. E. Trask, Z. Yang, and W. Lu (Argonne National Laboratory)

351

Facile and Cost Effective Directly Electrosprayed Graphene/Silicon Nanocomposites for High-Rate Lithium-Ion Battery Anodes

G. Shoorideh (Cornell Univesity), S. M. Park (Cornell University), A. Berry (Cornell Univesity), and Y. L. Joo (Cornell University)

352

Characterization and Chemical Mapping of High Capacity Intermetallic Li-Ion Anodes Using X-Ray Microscopy Techniques

H. J. Gonzalez-Malabet, L. Ausderau (University of Alabama in Huntsville), D. Juarez-Robles (Purdue University), X. Xiao, V. De Andrade (Argonne National Laboratory), Y. Liu (Stanford Synchrotron Radiation Lightsource), P. P. Mukherjee (Purdue University), and G. J. Nelson (University of Alabama in Huntsville)

353

Strategies for Overcoming Irreversible Lithium-Ion Losses in Silicon-Based Anodes (Cancelled)

354

A New Approach to Synthesis Micrometer-Sized Porous Silicon Anode for Lithium Ion Batteries

H. Jia, X. Li (Pacific Northwest National Laboratory), and J. G. Zhang (Joint Center for Energy Storage Research (JCESR))

355

Highly Stretchable Conductive Binder Based on PEDOT:PSS for High Performance Si Anode (Cancelled)

356

Rate Performance of Silicon Alloy in Blended Lithium-Ion Battery Anode with Graphite (Cancelled)

357

Computational Study of Surface Reactivity and Metal Dissolution in Li_xNi_0.5Mn_1.5O_4-Δ

K. Klyukin, N. N. Intan, and V. Alexandrov (University of Nebraska-Lincoln)

358

Jahn-Teller Distortion and Disproportionation in Spinel Lithium Manganese Oxides from First Principles (Cancelled)

359

Studying the Effects of Carbon Coatings on the Electrochemical Performance of LiNi_1/3Co_1/3Mn_1/3O₂ (Cancelled)

360

Core-Shell Architectured High Energy Cathode Nanocrystals to Stabilize the Electrode-Electrolyte Interface

B. J. Kwon (University of Illinois at Chicago), F. Dogan (Argonne National Lab), B. Key (JCESR at Argonne National Laboratory), J. Jokisaari (University of illinois at Chicago), J. W. Freeland (X-ray Science Division), C. Kim (Chungnam National University), R. F. Klie (University Of Illinois At Chicago), and J. Cabana (University of Illinois at Chicago)

361

Synthetic Control and Structural Stabilization of Ni-Rich Layered Oxides As High-Energy Cathode Materials for Lithium Ion Batteries (Cancelled)

362

Structural and Electrochemical Properties of RF Sputter Deposited LiCuPO₄ Thin Film Cathodes for Li-Ion Microbatteries (Cancelled)

363

Effects of Local Tortuosity and Porosity Heterogeneities on Charge and Discharge Performance of Li-Ion Batteries

M. M. Forouzan (Brigham Young University, Brigham Young University (BYU)), D. R. Wheeler, and B. A. Mazzeo (Brigham Young University)

364

Effects of Non-Uniform Temperature Distribution on Degradation of Lithium-Ion Cells

G. Zhang (University of Alabama in Huntsville)

365

Electrochemical Performance of Dry Battery Electrode

J. Shin and H. Duong (Maxwell Technologies, Inc.)

366

Improvement of Thermal Stability of Lithium Ion Pouch Type Cell

C. Sung (Ulsan National Institute of Science and Technology), H. Kim (Samsung Electronics Co. Ltd.), C. S. Kim (Samsung SDI Co Ltd.), M. G. Kim (Pohang Accelerator Laboratory), and K. M. Jeong (Ulsan National Institute of Science and Technology)

367

Analysis of Rate Limiting Factors for Electrodes with High Loadings for EV Batteries

B. S. Lee, Z. Wu, V. Petrova, and P. Liu (University of California, San Diego)

368

Mechanical Measurements for Early Detection of Thermal Runaway Induced By an Internal Short Circuit

S. Pannala (University of Michigan), M. Zhang (Tsinghua University), J. B. Siegel, G. B. Less, and A. G. Stefanopoulou (University of Michigan)

369

Modeling Cascading Failure of Thermal Runaway in Stacks of Li-Ion Pouch Cells with Variation in Cooling Attributes

R. C. Shurtz and J. Hewson (Sandia National Laboratories)

370

Sulfurized-Polyacrylonitrile Cathode with Polyacrylic Acid Binder and Fluoroethylene Carbonate Additive for Improved Performances of Lithium-Sulfur Batteries (Cancelled)