A05 Poster Session

A Novel Approach to Recycle Precious Metals from Spent Li-Ion Batteries

S. Xiong (Georgia Institute of Technology), A. Han (Pennsylvania State University), X. Ma, and H. Chen (Georgia Institute of Technology)

Electrochemical Performance and Rate Capability Studies of Li-Ion Battery Separators for Fast Charging Applications

D. Parikh (University of Tennessee, Knoxville, Oak Ridge National Laboratory), J. Li (University of Tennessee, Oak Ridge National Laboratory), and C. T. Hsieh (University of Tennessee, Knoxville, YUAN ZE UNIVERSITY)

Drying Process Research on High Energy Density LiNi_1/3Co_1/3Mn_1/3O₂ Electrode in Li-Ion Batteries

Y. Fu, X. Song, G. Liu, and V. Battaglia (Lawrence Berkeley National Laboratory)

Cathode Additive for LiNi_0.8Co_0.1Mn_0.1O₂/Li Metal Battery Operating at 4.3V

M. Yoo, E. J. Park, J. Ahn, J. Im, E. K. Jang, and K. Y. Cho (Hanyang University)

Probing the Chemical and Structural Stability of Oxide Cathodes Using a Surface Model Reaction

C. K. Waters (Virginia Tech) and F. Lin (Department of Chemistry, Virginia Tech)

Electrochemical Modeling on Crack Propagation within Ni-Rich Layered Cathode Materials

S. Park, J. Park, J. Song (DGIST), M. H. Ryou (Hanbat National University), and Y. Lee (DGIST)

Enhanced Cycling Stability of Microstructure-Modified Li[Ni_0.90Co_0.05Mn_0.05]O₂ Cathode Via Microscale Compositional Partitioning for Next-Generation Electric Vehicles

H. H. Ryu, G. W. Nam, and Y. K. Sun (Department of Energy Engineering, Hanyang University)

Strategy of Enhancing Energy Density of Layered Ni-Rich Li[Ni_1-2xCo_xMn_x]O₂ Cathodes (x = 0.05, 0.1, 0.2)

J. H. Kim, G. W. Nam, N. Y. Park, A. Aishova, D. R. Yoon, and Y. K. Sun (Department of Energy Engineering, Hanyang University)

Simulated Crystal Growth of Intermediate Phases Formed during Li and O Extraction of Nano-Li₂MnO₃ Cathode Material

T. Malibe, R. S. Ledwaba, M. G. Matshaba, and P. E. Ngoepe (University of Limpopo)

Implementation of Tin Dioxide/Graphene/Graphene Oxide for High Capacity and Long Cycle Life Lithium Ion Batteries

V. Dorvilien (Department of Physics, University of Puerto Rico, San Juan), M. LopezdeVictoria, V. Dorvilien (Department of Physics, University of Puerto Rico), F. Mendoza (Dept. of Physics, Univ. of Puerto Rico Rio Piedras Campus), B. R. Weiner (IFN, University of Puerto Rico), and G. Morell (Dept. of Physics, Univ. of Puerto Rico Rio Piedras Campus)

Electrochemical Performance of AlF₃-Coated LiNi_0.5Mn_1.5O₄ 5-V Cathodes at Elevated Temperature

J. Y. Lin and C. T. Chu (Department of Chemical Engineering, Tatung University)

Dilution Effects of Highly Concentrated Dimethyl Carbonate-Based Electrolyte Solutions for LiNi0.8Co0.1Mn0.1O2 Positive Electrode

Z. Cao (Doshisha University), M. Haruta (Faculty of Science and Engineering, Doshisha University), T. Doi, and M. Inaba (Doshisha University)

The Correlation between the Particle Morphology and the Electrochemical Stability for High-Ni Cathode and Understanding of the Mechanism of Parasitic Reaction.

J. Gim, T. Liu, B. T. Yonemoto (Argonne National Laboratory), Y. Shin (Applied Materials Division, Argonne National Laboratory), L. Estevez (Pacific Northwest National Laboratory), Y. Ren, J. R. Croy, Z. Chen, and K. Amine (Argonne National Laboratory)

Investigation of « Cross-Talking » Phenomenon within Li-Ion Batteries

G. Portalis (SAFT, LISE - Sorbonne Université - CNRS), B. Simon (SAFT), and V. Vivier (LISE - Sorbonne Université - CNRS)

Electrochemical-Shock Resistant Single-Crystal Ni-Rich Layered Cathode Materials

G. Qian, Z. F. Ma, and L. Li (Shanghai Jiao Tong University)

Graphene-Incorporated Nano-Structured Iron Oxyfluoride with Excellent Performance As Cathode Materials for Li-Ion Batteries

Y. Liu (Indiana University Purdue University Indianapolis), F. Yang (Indiana University-Purdue University Indianapolis), K. Yu (International Iberian Nanotechnology Laboratory), C. Li (Indiana University Purdue University Indianapolis), Y. Ren, C. Sun (Argonne National Laboratory), Y. Liu (Center for Nanoscale Materials), and J. Xie (IUPUI)

The Influence of Polyvinylidene Fluoride (PVDF) Binder Properties on LiNi0.33Co0.33Mn0.33O2 (NMC) Electrodes Made By a Dry-Powder-Coating Process

M. Wang, J. Hu, Y. Wang, and Y. T. Cheng (University of Kentucky)

Impedance Informed, High Frequency Pulse Charging As Method to Enable Stable Low Temperature Li-Ion Battery Operation

E. J. Klein (Georgia Institute of Technology), R. E. Carter (NRC Postdoctoral Associate), and C. T. Love (U.S. Naval Research Laboratory)

Direct Observation of Electrochemically Active Fe³⁺/Fe⁴⁺ in LiCo_0.8Fe_0.2MnO₄ By in Situ Mössbauer and in Situ X-Ray Absorption Spectroscopy

S. Indris (IAM-ESS, Karlsruhe Institute of Technology), C. Dräger (IAM-ESS - Karlsruhe Institute of Technology), and H. Ehrenberg (IAM-ESS, Karlsruhe Institute of Technology)

Lithium/Oxygen Incorporation-Induced Structural Transformation during Synthesis of Cobalt-Free Li-Mn-Rich Oxides

W. Hua, B. Schwarz (Karlsruhe Institute of Technology (KIT)), M. Knapp (Helmholtz Institute Ulm (HIU)), M. Etter, A. Schökel (Deutsches Elektronen-Synchrotron (DESY)), J. R. Binder (KIT - Institute for Applied Materials), S. Indris, and H. Ehrenberg (IAM-ESS, Karlsruhe Institute of Technology)

Molecular Dynamics Simulation Study of Ion Transport, Structural and Mechanical Properties of Li₂CO₃ and Mn-Li-CO₃

M. Ebrahiminia (Materials Science and Engineering, Univeristy of Utah), C. Wang (University of Utah), J. B. Hooper, and D. Bedrov (The University of Utah)

Enabling High Temperature Lithium Ion Batteries through NMR Analysis

N. M. Johnson and Z. Zhang (Chemical Sciences and Engineering Division, Argonne National Laboratory)

Improvement of Specific Capacitance in Lithium Ion Batteries By Mesoporous Carbon Hybrid Nanostructures

V. Dorvilien (Dept. of Physics, University of Puerto Rico, San Juan, USA, Institute for Functional Nanomaterials, UPR-RP), C. V. Rojas (Dept. of Chemistry, University of Puerto Rico, USA), N. Santa Cruz (Department of Physical Sciences, University of PR), F. Mendoza (Department of Physics, University of Puerto Rico), B. R. Weiner (IFN, University of Puerto Rico), and G. Morell (Dept. of Physics, Univ. of Puerto Rico Rio Piedras Campus)

Phase Equilibria and Lithiation of Industrially Produced Heterogeneous Tin Sulphide Anode Materials for Lithium Ion Batteries

D. M. Cupid (AIT Austrian Institute of Technology GmbH), M. Artner (Frimeco Produktions GmbH), R. Hamid, A. Rezqita (Austrian Institute of Technology GmbH), V. Bauer (Frimeco Produktions GmbH), A. Glibo (AIT Austrian Institute of Technology GmbH, University of Vienna), H. Flandorfer (University of Vienna), and M. Jahn (AIT Austrian Institute of Technology GmbH)

Cobalt Phosphide Anchored on Graphene Naonosheet As High-Capacity Anodes for Li-Ion Battery

Y. Yang (Georgia Institute of Technology), Z. F. Ma (Shanghai Jiao Tong University), and F. M. Alamgir (Georgia Institute of Technology)

Conductive Metal-Organic Framework Coated Silicon Nanoparticles As an Anode Material for High Power Lithium-Ion Batteries

A. Nazir and C. J. Park (Chonnam National University)

Silicon Anode Confined in Carbon Nano-Spaces for Efficient Lithium Storage

H. Jung (Gyeongnam National University of Science and Technology)

Analysis of Iron Oxide Powder Formation By Hydrothermal Method through a Statistical Experimental Design and Evaluation of Its Use As Anodes for Libs

F. Gülcan (Istanbul Technical Unversity, Istanbul Medipol University) and B. D. Karahan (Istanbul Medipol University)

Thermoplastic Elastomer Coated-Snsb As an Anode Electrode for Li-Ion Batteries

A. T. Tesfaye (École Nationale Supérieure des Mines de Saint-Étienne), F. Dumur (Aix Marseille Université), D. Gigmes (ICR UMR 7273, Aix Marseille University), S. Maria (Centre National de la Recherche Scientifique (CNRS)), L. Monconduit (Institut Charles Gerhardt), and T. Djenizian (Ecole Nationale Superieure des Mines de Saint-Etienne)

Ultrasmall Sn Nanodots Dispersed in Cross-Linked N-Doped Carbon Cages for High-Performance Lithium Storage

H. Ying and W. Han (Zhejiang University)

High C-Rate Lithium Ion Batteries with Niobium Tungsten Oxide

Y. Kim, Q. Jacquet, B. L. D. Rinkel (University of Cambridge), K. J. Griffith (University of Cambridge, Northwestern University), and C. P. Grey (University of Cambridge)

Experimental Study on the Fabrication of Metal Oxide Anodes By Hydrochloric Leaching of Ferro-Chrome Alloys

F. Gülcan and B. D. Karahan (Istanbul Medipol University)

Study on Anion Doped Polypyrrole As Anode Material for Aqueous Sodium Ion Battery

D. Cao and P. Wang (Harbin Engineering University)

Investigation of Novel Electrolyte Formulations for Li₄Ti₅O₁₂/LiMn₂O₄ Cells

B. Lucht, J. Kim (University of Rhode Island), M. Payne, J. Hoffmann, and M. Milien (Gotion)

Small Functional Molecules As Slurry Additives for Si-Alloy Coatings with CMC/SBR Binder

C. Wei (Department of Chemistry, Dalhousie University) and M. N. Obrovac (Dalhousie University)

Thin Film Lithium Niobites with Intrinsic High-Rate Performance for Lithium-Ion Batteries

D. C. Lee, J. C. Shank, W. A. Doolittle, and F. M. Alamgir (Georgia Institute of Technology)

Synthesis of Silicon-Germanium Compounds Anode Material By Potentiostatic Electrolysis Method in Molten Salt for Lithium-Ion Battery

Y. Yan and Y. Song (Harbin Engineering University)

Investigation on Formation Process of Lithium-Ion Batteries

Y. Kim and K. M. Jeong (Ulsan National Institute of Science and Technology)

One-Step Preparation of Lif Coated Li to Stabilize Li Metal Anode

D. Cao and Z. Gong (Harbin Engineering University)

Improving the Electrochemical Performance of Li₄Ti₅O₁₂ Anode By Phosphorus Reduction at a Relatively Low Temperature

W. Deng (Suzhou University of Science and Technology)

New 2.1 V Lithium- Ion Battery with Sulfurized Polyacrylonitrile (SPAN) Anode and LiMn₂O₄Cathode

G. B. Berhe (National Taiwan university of science and technology), W. N. Su (National Taiwan University of Science and Technology), and B. J. Hwang (National Synchrotron Radiation Research Center, National Taiwan University of Science and Technogy)

Use of Electrochemical Impedance Spectroscopy to Reveal Ageing Mechanisms in Silicon Anodes for Lithium-Ion Batteries

L. Spitthoff, M. T. Rauter, and A. M. Svensson (Norwegian University of Science and Technology)

A Benign Sol-Gel Route Towards Porous Carbon Coated Sb Nanoparticles: A High-Performance Li-Ion Batteries Anode

L. Dashairya, P. Saha (National Institute of Technology, Rourkela, India), V. Chaturvedi, and M. Shelke (CSIR-National Chemical Laboratory, Pune, India)

A New Method to Study Depth Profiles in Silicon/Carbon Composite Electrodes

K. Richter, T. Waldmann, M. Kasper, C. Pfeifer, M. Memm, P. Axmann, and M. Wohlfahrt-Mehrens (ZSW - Center for Solar Energy and Hydrogen Research)

X-Ray Photoelectron Study of the Binder/Electrode Interface on Silicon Anodes for Lithium Ion Batteries

R. Johnson (New Jersey Institute of Technology), G. H. Waller (Naval Surface Warfare Center, Carderock Division), and S. Nadimpalli (New Jersey Institute of Technology)

Directly Electrodeposited Porous Sicu Composites As Li-Ion Batteries Anode Materials

G. Li and B. Li (East China University of Science and Technology)

An Approach for Highly Improved Cyclic Performance of SiO_x Active for Lithium Ion Battery; Design of Physically Durable and Performance Sensitive SEI

H. W. Yang (Sejong university) and S. J. Kim (Sejong University)

CO₂-Derived, in-Situ Carbon-Coated Macroporous Silicon As a High Performance Anode Material for Lithium-Ion Batteries

Y. Cha, P. Dong, X. Zhang, and M. K. Song (Washington State University)

Understanding the Role of Fluoroethylene Carbonate As a Electrolyte Additive in Silicon Anode Lithium-Ion Batteries

A. D. Pathak, K. Samanta, K. K. Sahu, and S. Pati (Indian Institute of Technology Bhubaneswar)

Investigation of Thermodynamic Nonideality of Solid Li-ion Electrodes Using Concentrated Solution Theory

X. Jin (University of Massachusetts)

Electrochemical-Thermal Tanks-in-Series Models for Lithium-Ion Batteries

A. Subramaniam (University of Washington), S. Kolluri (BattGenie Inc, Seattle, University of Washington), C. D. Parke (University of Washington), M. Pathak (BattGenie Inc, Seattle), S. Santhanagopalan (National Renewable Energy Laboratory), and V. R. Subramanian (Pacific Northwest National Laboratory, University of Washington)

High Accuracy Battery Modeling : Fully 3D-Resolved Lithium-Ion Battery Mesostructure Including Carbon Binder Domains

M. Chouchane, A. Rucci, Z. Su (LRCS (CNRS&UPJV), RS2E), A. Demortiere (LRCS Amiens - CNRS,RS2E, ALISTORE-ERI), and A. A. Franco (LRCS (CNRS&UPJV), RS2E, ALISTORE-ERI, Institut Universitaire de France)

Characterization of Flowing Aqueous Solid Dispersions of Electroactive Lithium-Ion Battery Materials

G. Koenig, S. Foley, L. Geng, and D. Gupta (University of Virginia)

Molecular Analysis of Transport Characteristics of Li Ion in Solid State Electrolyte

K. Nakajima (Tohoku university), T. Mabuchi, and T. Tokumasu (Tohoku University)

Single Particle Characterization of Dynamic Morphological and Phase Changes in Selenium-Doped Germanium Anode during (de)Lithiation Processes

T. Li (Purdue University, Indiana University Purdue University Indianapolis), X. Zhou (Indiana University Purdue University Indianapolis), Y. Cui (Indiana University-Purdue University Indianapolis), M. Meyerson (University of Texas at Austin), J. A. Weeks, C. B. Mullins (The University of Texas at Austin), V. De Andrade (Argonne National Laboratory), F. De Carlo (Argonne National Lab), Y. Liu (Center for Nanoscale Materials), and L. Zhu (Indiana University Purdue University Indianapolis)

Characterization of Aged Li-Ion Battery Electrodes for Direct Recycling Process Design

K. Fink and S. Santhanagopalan (National Renewable Energy Laboratory)

Obtaining Reliable Kinetics from Nanosized Battery Materials

S. B. Schougaard (NanoQAM)

In Situ Focused Ion Beam-Scanning Electron Microscope Study of Crack and Nanopore Formation in Germanium Particle during (De)Lithiation

X. Zhou, T. Li (Indiana University Purdue University Indianapolis), Y. Cui (Indiana University - Purdue University Indianapolis), Y. Liu (Center for Nanoscale Materials), C. B. Mullins (The University of Texas at Austin), M. Meyerson (University of Texas at Austin), and L. Zhu (Indiana University Purdue University Indianapolis)

Role of Oxygen Vacancy Defects in the Electrochemical Performance of Substoichiometric Molybdenum Oxide

Y. Cui (Institute of Electronic Engineering,CAEP), K. Wei, Y. Zhao, C. Zeng (Institute of Electronic Engineering,CAEP), and Y. Cui (Institute of Electronic Engineering, CAEP)

Interest of Cross-Section Surface Analysis for Li-Ion Batteries and Beyond

L. Madec (IPREM UMR5254 - E2S UPPA/CNRS, RS2E), J. B. Ledeuil (IPREM UMR5254 - E2S UPPA/CNRS), G. Gachot (LRCS - Univ. Picardie, RS2E), G. Coquil (ICG-AIME, Université Montpellier 2), C. Courrèges (IPREM UMR5254 - E2S UPPA/CNRS), L. Monconduit (ICG-AIME, Université Montpellier 2, RS2E), and H. Martinez (IPREM UMR5254 - E2S UPPA/CNRS)