A06 Poster Session

Thermodynamic Perspective on Co-Intercalation Behavior of Li/Mg Dual Cations in Intercalation Cathode Materials

H. Li (Institute for Materials Research, Tohoku University), T. Hatakeyama (Tohoku University), N. L. Okamoto (Institute for Materials Research, Tohoku University), Y. Kumagai, F. Oba (Tokyo Institute of Technology), and T. Ichitsubo (Institute for Materials Research, Tohoku University)

Promises and Challenges Facing Lithium Metal Batteries

S. H. Wu, W. H. Wu, C. H. Chao, C. C. Chang, and J. Fang (Industrial Technology Research Institute)

Low Polarization Air Electrode Prepared By Pdl Method for Air Rechargeable Battery

K. Kawaguchi, S. Kino, and M. Morimitsu (Doshisha University)

Fabrication and Characterization of High Capacity and Long Cycle Life Lithium-Sulfur Battery Using Porous Material As a Polysulfide Adsorbent

T. A. Zegeye, W. N. Su, C. F. Jeffrey Kuo, and B. J. Hwang (National Taiwan University of Science and Technology)

Electrode Perforation Induced Performance Increase in Vanadium Redox Flow Batteries

I. Lin, M. Katou, and T. Kanno (Sumitomo Electric Industries, Ltd.)

Exploring Ionic Liquid-Solvent Blend Formulations for the Stable Cycling of Li-Metal Anodes in Li-O₂ Batteries

A. R. Neale (University of Liverpool), R. Sharpe (University of Bath, Loughborough University), S. Yeandel, P. Goddard (Loughborough University), E. Petrucco (Johnson Matthey), and L. J. Hardwick (University of Liverpool)

On Improving the Cycling Stability of P2-Type Na_0.67Ni_0.33Mn_0.67O₂ Cathode Material By Ti-Substitution for Na-Ion Batteries

D. Pahari and S. Puravankara (Indian Institute of Technology Kharagpur)

Experimental and Theoretical Investigation of Lithium Sulfide Deposition on a Polished Graphite Cathode for Lithium-Sulfur Batteries during Discharge

C. Shen, P. Andrei, and J. P. Zheng (Florida State University)

Symmetric All-Quinone Aqueous Battery

Y. Jing, L. Tong (Harvard Department of Chemistry and Chemical Biology), M. J. Aziz (Harvard School of Engineering and Applied Sciences), and R. G. Gordon (Harvard Department of Chemistry and Chemical Biology)

A Water-Miscible Quinone Flow Battery with High Volumetric and Energy Density

S. Jin (Harvard School of Engineering and Applied Sciences), Y. Jing (Harvard Department of Chemistry and Chemical Biology), M. J. Aziz (Harvard School of Engineering and Applied Sciences), and R. G. Gordon (Harvard Department of Chemistry and Chemical Biology)

A High Voltage Sodium Ion Battery Based on Low-Cost Sodium Iron Sulfate Cathode Material

S. Li, J. Zhao, and L. Gao (Soochow University)

Synergistic Effect of 3D Current Collectors and ALD Surface Modification for High Coulombic Efficiency Lithium Metal Anodes

K. H. Chen, A. J. Sanchez, E. Kazyak, A. L. Davis, and N. P. Dasgupta (University of Michigan, Ann Arbor)

Li-Substituted Layered-Spinel Cathode Material for Sodium-Ion Batteries

C. Deng, P. Skinner (Boise State University), Y. Liu (Center for Nanoscale Materials), R. Hunt, M. L. Lau (Boise State University), M. Sun (Lawrence Berkeley National Laboratory), C. Ma (Shanghai Electrochemical Energy Devices Research Centre), W. Tong, J. Xu (Lawrence Berkeley National Laboratory), and H. Xiong (Boise State University)

Hollandite-Type VO_1.75(OH)_0.5: Effective Sodium Storage for High-Performance Sodium Ion Batteries

J. H. Jo, J. Kim, and S. T. Myung (Sejong University)

Exploring the Effect of Varying Reduced Graphene Oxide Content on the Stable Electrochemical Performance of Sb Nanoparticles Anode for Na-Ion Batteries

L. Dashairya (National Institute of Technology, Rourkela, India), D. Das, S. B. Majumder (Indian Institute of Technology, Kharagpur, India), and P. Saha (National Institute of Technology, Rourkela, India)

Oxygen Barrier Composite Membrane for Li-Air Battery Using Cuboid LiAlTiPO₄ in Orthogonal Array

K. H. Choi, W. Choi, and D. Im (Samsung Electronics Co., Ltd.)

Potential-Dependent Oxidation Mechanism of Li₂O₂ and Its Application in Li-O₂ Batteries

Y. Wang and Y. C. Lu (The Chinese University of Hong Kong)

Solvate Ionic Liquid Electrolytes for Mg Batteries

K. Dokko, S. Suzuki, S. Terada, K. Hashimoto (Yokohama National University), S. Tsuzuki (AIST), M. L. Thomas (Yokohama National University), T. Mandai (Faculty of Science and Engineering, Iwate University), and M. Watanabe (Yokohama National University)

Starch Derived Hard Carbon Anodes for Sodium Ion Battery

A. A. Arie, H. Kristianto, and H. Muljana (Parahyangan Catholic University)

Novel Porous Complex Framework Materials (CFM) Based Sulfur Hosts for High Energy Density Li – S Batteries

P. Murugavel Shanthi, B. Ramalinga, B. Gattu, M. K. Datta, O. I. Velikokhatnyi, and P. N. Kumta (University of Pittsburgh)

Tailoring of Liquid Electrolytes for Room-Temperature Fluoride Shuttle Batteries

M. Kawasaki, K. I. Morigaki, G. Kano, T. Minato (Office of Society-Academia Collaboration for Innovation, Kyoto University), T. Abe (Graduate School of Global Enviromental Studies, Kyoto University), and Z. Ogumi (Office of Society-Academia Collaboration for Innovation, Kyoto University)

Solubility and Stability of NaO₂ in Diglyme-Based Na-O₂ Batteries

B. Qin, C. Y. V. Li, and K. Y. Chan (The University of Hong Kong)

Operando X-Ray Diffraction of Lithium-Sulfur Batteries with Concurrent Resistance Measurement

Y. C. Chien, A. S. Menon, W. R. Brant, D. Brandell, and M. J. Lacey (Department of Chemistry - Ångström, Uppsala University)

Characterization of the Effect of Electrolyte-to-Sulfur Ratio on the Lithium-Sulfur Cell Resistance Using Electrochemical Impedance Spectroscopy Method

A. Karakus and D. Eroglu (Bogazici University)

Pre-Lithiation Method with Span-CNT Cathode in Li-S Batteries

D. Ye, C. Shen, and J. P. Zheng (Florida State University)

Improvement of the Li Dissolution/Deposition Reversibility Under Oxygen Atmosphere By Employment of LiNO_3⁻based Electrolyte

M. Sohmiya (Department of Science and Engineering, Seikei University), T. Fujinami (Tokyo University of Agriculture and Technology), Y. Hayashi (Tokyo University of Agriculture and Technology.), H. Otsuka (National Institute for Materials Science (NIMS)), K. Ito, Y. Kubo (National Institute for Materials Science), and M. Saito (Department of Science and Engineering, Seikei University)

Nitrogen-Containing Organic Electrode Materials for Li-Ion Batteries and Beyond

C. Luo (University of Maryland, MD) and C. Wang (University of Maryland, College Park)

Mastering of Particle Size and Morphology of the Puckered Layer γ’-V₂O₅ Polymorph for Enhanced Na Electrochemical Properties

R. Baddour-Hadjean, M. Safrany-Renard, N. Emery, B. Laïk, D. Batyrbekuly (ICMPE-CNRS), Z. Bakenov (School of Engineering, Nazarbayev University), and J. P. Pereira-Ramos (ICMPE-CNRS)

Lithium Ion Conducting Block Copolymers: Conductivity and Battery Performance

Y. He, Y. J. Min, N. Liu, and P. A. Kohl (Georgia Institute of Technology)

Conducting Polymers for Batteries

D. Chhin, L. Padilla-Sampson (UQAM), D. Lepage (UQAM, Current Address: Université de Montréal), L. Savignac, A. Nazemi (UQAM), and S. B. Schougaard (Université du Québec à Montréal, Departement of Chemistry, NanoQAM)

Earth Abundant Iron-Based Fluoro(hydroxy)Phosphate As Cathode Materials for Aqueous Batteries

L. Sharma (Indian Institute of Science, Bangalore), S. Okada (IGSES, Kyushu University), and P. Barpanda (Indian Institute of Science)

Carbon Inverse Opals As a Sulfur Host for Advanced Lithium–Sulfur Batteries

D. McNulty and S. Trabesinger (Paul Scherrer Institute, Electrochemistry Laboratory)

Investigation of Olivine and Nasicon Structured Phosphates As Potential Cathode Materials for Magnesium Ion Batteries

M. Romio (AIT Austrian Institute of Technology GmbH, Queen Mary University of London), D. M. Cupid, J. Kahr, Y. Surace, M. Jahn (AIT Austrian Institute of Technology GmbH), and I. Abrahams (Queen Mary University of London)

Improvement of Electrochemical Stability of Layered Oxide Electrodes in Na-Ion Batteries Via Control of Chemical Composition in the Interlayer Region

E. Pomerantseva (Drexel University)

New Nitrile Type Bi-Functional Additive for High-Performance Li-Metal Batteries

S. H. Lee and Y. K. Sun (Department of Energy Engineering, Hanyang University)

Scalable Synthesis of Li₂S-Based Composite Cathodes from Li₂SO₄

B. Johnson, R. Glaser, K. Ewers, B. Spivock (Georgia Institute of Technology), M. Sanghadasa (U.S. Army Combat Capabilities Development Command), and G. Yushin (Sila Nanotechnologies, Inc.)

Unraveling the Enhanced Cycling Performance of Lithium–Oxygen Batteries Based on Metal Organic Frameworks

X. Zhang, P. Dong, J. T. Gray, Y. Cha, S. Ha, and M. K. Song (Washington State University)

Effect of the Particle-Size Distribution on the Electrochemical Performance of a Red Phosphorus-Carbon Composite Anode for Sodium-Ion Batteries

I. Capone (University of Oxford) and M. Pasta (Department of Materials, University of Oxford)

High-Energy Lithium/SeS₂ Batteries with Hierarchical Nanocomposite Cathode and Ionic Liquid-Based Electrolytes

P. Dong, J. I. Lee, Y. Cha, X. Zhang, and M. K. Song (Washington State University)

Crosslinked Quaternized Poly(arylene ether benzonitrile) Membranes for Vanadium Redox Flow Batteries

E. J. Park, S. Maurya, Y. S. Kim, and R. Mukundan (Los Alamos National Laboratory)

MgCr_2-XV_xO₄ High Voltage Spinel Oxide Cathodes for Mg-Ion Batteries

B. J. Kwon, K. L. Hawthorne, K. C. Lau, S. Kim (Argonne National Laboratory), Y. Wu (University of Illinois at Chicago), T. T. Fister (Chemical Sciences and Engineering Division), C. Liao (Joint Center for Energy Storage Research), R. F. Klie (University Of Illinois At Chicago), S. Lapidus (Advanced Photon Source), B. Key, and J. T. Vaughey (JCESR at Argonne National Laboratory)

Facet Engineering of Low-Cost Transitional Metal Oxides for Tunable ORR/OER Kinetics

Y. Yuan (Argonne National Laboratory, University of Illinois at Chicago), W. Yao (Michigan Technological University), G. Tan (Argonne National Laboratory), C. Liu (Argonne National Lab), M. Cheng, V. Yurkiv (University of Illinois at Chicago), X. Bi (Argonne National Laboratory), F. Long, C. Friedrich (Michigan Technological University), K. Amine (Stanford University), J. Lu (Argonne National Laboratory), and R. Shahbazian-Yassar (University of Illinois at Chicago)

Pb-Based Nanocomposite Anodes for Li- and Na-Ion Batteries

J. Han, J. Park (Argonne National Laboratory, Ulsan National Institute of Science and Technology), Y. Kim (Ulsan National Institute of Science and Technology), S. Ahmed, E. Lee, and C. S. Johnson (Argonne National Laboratory)

Hierarchically Designed Three-Dimensional Conducting Scaffold Current Collector for Highly Stable Li Metal Anodes

J. Y. Kim and J. K. Lee (Korea Institute of Science and Technology)

Understanding Reaction and Transport Interaction of Redox Mediators in Li-O₂ Batteries

S. Kynast, I. Dorner, V. Laue, F. Kubannek (TU Braunschweig), and U. Krewer (Inst. of Energy & Process Systems Eng., TU Braunschweig)

Sodiation Driven Mechano-Electrochemical Interaction in Alloy Electrodes

S. Sarkar, A. Verma, and P. P. Mukherjee (Purdue University)

Controllable Charge Capacity Using a Black Additive for High-Energy-Density Sodium-Ion Batteries

C. H. Jo (Sejong University), K. Lee (SAMSUNG SDI), and S. T. Myung (Sejong University)

Na₂MPO₄f (M: Fe, Mn, Co): Bifunctional Electrocatalysts for Na-Air Batteries

L. Sharma (Indian Institute of Science, Bangalore) and P. Barpanda (Indian Institute of Science)

Electrochemical Measurements of Single Positive Electrode Particle for Lithium (Sodium)-Ion Batteries

T. Saito (Kogakuin University), T. Nakamura (University of Hyogo), T. Kobayashi (Central Research Institute of Electric Power Industry), and S. Seki (Kogakuin University)

Novel Sulfonated Aromatic Polymer Membranes for Breaking the Coulombic and Voltage Efficiency Trade-Off Limitation in Vanadium Redox Flow Battery

S. Kim, T. Wang (University of Illinois, Chicago), J. Han, K. Kim (Rensselaer Polytechnic Institute), A. Munchinger (Max-Planck-Institute for Solid State Research), K. D. Kreuer (Max-Planck-Institute), and C. Bae (Rensselaer Polytechnic Institute)

Layered Iron Vanadate As a High-Energy Cathode Material for Nonaqueous Calcium-Ion Batteries

M. S. Chae, D. Setiawan, H. J. Kim, and S. T. Hong (DGIST (Daegu Gyeongbuk Institute of Science & Technology))

Von-Alpen Type Nasicon for Seawater Battery Application

W. Go and Y. Kim (Ulsan National Institute of Science and Technology)

Metal Phosphide-Embedded Phosphorus-Based Nanocomposite Anode Materials for Rechargeable Batteries

S. O. Kim (Korea Institute of Science and Technology)

Controlling Electrochemical Lithium Deposition and Sulfur Reduction Mechanism through Liquid Electrolytes

T. Y. Lin, C. Y. Wang, and H. L. Wu (CCMS, National Taiwan University, Taiwan)

Investigation of the Kinetics of Rechargeable Aqueous Zinc Ion Batteries

C. Bischoff, O. Fitz, H. Gentischer, D. Biro (Fraunhofer Institute for Solar Energy Systems ISE), and H. M. Henning (Institute for Sustainable Technical Systems (INATECH))

Advanced Nanoporous Separators for Stable Lithium Metal Electrodeposition at Ultra-High Current Densities in Liquid Electrolyte

J. Yang (CCMS, National Taiwan University), C. Y. Mou (National Taiwan University), and H. L. Wu (CCMS, National Taiwan University, Taiwan)

Highly Active Transition Metal Dichalcogenides As Bifunctional Electrocatalysts for Li-Oxygen Batteries

L. Majidi, A. Salehi-Khojin (University of Illinois at Chicago), and L. A. Curtiss (Argonne National Laboratory)

Ion Tracking in Aqueous Sodium-Ion Batteries

K. Oleson and T. Madden (BenAn Energy USA)

The Influence of Ionomeric Coatings at the Electrolyte-Electrode Interface in Metal Batteries

L. C. Merrill, H. O. Ford, and J. L. Schaefer (University of Notre Dame)

Understanding the Behavior of Lithium Bis(fluorosulfone)Imide and Lithium Bis(trifluoromethanesulforyl)Imide in Localized Superconcentrated Electrolytes

S. Mai, S. Ivanov, A. Bund (Technische Universität Ilmenau), T. Thompson, P. E. Cabelguen, K. Vasseur, and S. Levasseur (Umicore R&D, Brussels, Belgium)

Lithium-Mediated Ammonia Synthesis from Water and Nitrogen Based on a Membrane-Free Immiscible Aqueous/Organic Hybrid Electrolyte System

K. Kim, Y. Chen, and W. Li (Iowa State University)

Advances in Lithium Air Batteries

T. Campbell and L. Johnson (Excellatron Solid State, LLC)

Properties of Thin Lithium Metal Electrode in Carbonate Electrolytes

J. Guo (University of California Riverside) and J. Zhang (University of California, Riverside)

Dicyanobenzoquinone Functionalized Carbon Nanotubes As Cathode Materials for Rechargeable Lithium and Sodium Ion Batteries

H. Lyu, C. J. Jafta, I. Popovs, J. Huang, B. G. Sumpter, S. Dai, and X. G. Sun (Oak Ridge National Laboratory)

Enhancing the Performance of Vanadium Redox Flow Batteries Using Carbon Cloth Electrode Decorated with C/WO_x Nanocomposites

F. El Diwany (American University in Cairo), E. N. El Sawy (Department of Chemistry, The American University in Cairo), and N. Allam (American University in Cairo)

Developing High Surface Area Flow through Electrodes with Enhanced Electrical Conductivity for Flow Battery Application

M. A. Murtaza and J. T. Gostick (University of Waterloo)

Electrochemical Properties of Chemical Composition-Tuned SnP_x/C Nanocomposite Anode in a Sodium-Ion Battery

H. Song, H. G. Lee, and K. Eom (Gwangju Institute of Science and Technology)

Porous Red Phosphorus and Reduced Graphene Oxide Composite Anode with High Capacity and Stability in a Sodium-Ion Battery

H. G. Lee (Gwangju Institute of Science and Technology), U. Chang (Gwangju Institute of Science and Technology (GIST)), H. Song, and K. Eom (Gwangju Institute of Science and Technology)

NaM₂(PO₄)(SO₄)₂(M= Fe, V, Cr) As Electroactive Materials for Na-Ion Batteries

H. Ben Yahia, A. Alkhateeb, and R. Essehli (Qatar Environment and Energy Research Institute QEERI 2.0)

Development of Cathode and Electrolyte Materials for Lithium-Oxygen Batteries for Electric Aviation

D. A. Dornbusch (NASA Glenn Research Center, Case Western Reserve University), B. Radhakrishnan (NASA-Ames Research Center, AMA Inc), R. Viggiano, F. W. Dynys (NASA Glenn Research Center), and J. W. Lawson (NASA Ames Research Center)

Lithium-Ion Exchange Polymer Membranes Limit Migration of Dissolved Polysulfide Species in Li-S Batteries

H. Xu (Giner Inc.), M. Moreira, C. Laicer, and K. Harrison (Giner, Inc)

A Polymer Scaffold Binder Structure for Improving Long-Term Cycle Performance of Lithium Metal Powder Electrode

D. Jin, Y. Roh, S. Byun, D. Kim (DGIST), M. H. Ryou (Hanbat National University), and Y. Lee (DGIST)

High Efficient Ion Selective Membrane Separator for Room Temperature Sodium Polysulfide Redox Flow Batteries

A. Amiri (University of Illinois at Chicago), T. Wang (University of Illinois, Chicago), C. Bae (Rensselaer Polytechnic Institute), and S. Kim (University of Illinois, Chicago)

Investigating the Effect of Carbonaceous Host Materials on the Performance of Alkali Metal Composite Anodes

D. Kautz and F. Lin (Department of Chemistry, Virginia Tech)

Effect of Thermally Evaporated Silver Nanoparticles on the Surface Morphology and Stability of Electrodeposited Lithium Metal Anode

K. Y. Cho, J. Kwon, H. G. Lee, H. Song, and K. Eom (Gwangju Institute of Science and Technology)

Finite Element Simulation of Electrochemical Impedance Spectra in Li-S Batteries

C. Shen, P. Andrei, and J. P. Zheng (Florida State University)

A Highly Conductive Artificial Interface Layer Based on V_O-Rich Zirconia/Polymer Hybrid Nanoparticles for Stable Lithium Plating/Stripping

S. Li, J. Whitacre, and K. Matyjaszewski (Carnegie Mellon University)

Diagnostics for Failure Modes in Non-Aqueous Flow Batteries

H. D. Pratt III, L. J. Small, and T. M. Anderson (Sandia National Laboratories)

Composite Anode of Lithium Metal Powder and Graphite for Improving Performance of Lithium Metal Anode

N. G. Go, S. T. Lee, and W. Y. Yoon (Korea University)

Electrochemical Behavior of Lithium Chloride/Polymer Hybrid Layer Coated Lithium Powder Anode

S. T. Lee, N. G. Go, and W. Y. Yoon (Korea University)

Stabilizing NaCrO₂ By Sodium Site Doping with Calcium

L. Zheng (Department of chemistry, Dalhousie University), J. C. Bennett (Acadia University), and M. N. Obrovac (Dalhousie University)

Synthesis of Mesoporous Carbon Using Waste Orange Peel As an Anode Material for Potassium-Ion Batteries with Long Cyclability

R. Verma and C. J. Park (Chonnam National University)

Rapid Li Diffusion By Ferroelectric Polarization for Smooth Lithium Deposition

C. Hwang (Ulsan National Institute of Science and Technology, Georgia Institute of Technology), W. J. Song (Pohang University of Science and Technology), Y. Wu, N. Liu (Georgia Institute of Technology), S. Park (Pohang University of Science and Technology), and H. K. Song (Ulsan National Institute of Science and Technology)

Understanding the Link between Anion Structure and Lithium Coordination

D. A. Osborne (RMIT University), M. Breedon, G. Collis (CSIRO), and M. J. S. Spencer (RMIT University)

A Novel Ternary Ordered Intermetallics Cu₃znsb As Anode for Sodium-Ion Storage

D. Pahari, S. Misra, P. P. Jana, and S. Puravankara (Indian Institute of Technology Kharagpur)

Nanostructured Metal Oxide Based Interlayers for Lithium-Sulfur Batteries

T. Zhao (Beijing Institute of Technology, University of Cambridge), R. Chen (Beijing Institute of Technology), and R. V. Kumar (University of Cambridge)

Phase Inversion Strategy to Flexible Freestanding Electrodes: Critical Coupling of Binders and Electrolytes for High Performance Li-S Battery

W. Wahyudi, Z. Chao, P. Kumar, M. Li, Y. Wu, M. N. Hedhili, L. Cavallo (King Abdullah University of Science and Technology), L. J. Li (Research Center for Applied Sciences, Academia Sinica), J. Ming, and T. D. Anthopoulos (King Abdullah University of Science and Technology)

Stable Structure and Electronic Structure for MgCo_2-XMn_xO₄ As Cathode Material for Magnesium Secondary Battery in Discharge Process Using First Principle Calculation

C. Ishibashi, N. Ishida, N. Kitamura, and Y. Idemoto (Tokyo University of Science)

Instigation of Low Cost, Non-Toxic and Environmentally Benign Binders for Mild Aqueous Zn/MnO₂ Systems

H. J. Chang, H. Pan, D. Choi (Pacific Northwest National Laboratory), I. Rodríguez-Pérez (Pacific Northwest National laboratory), X. Li, D. Reed, and V. Sprenkle (Pacific Northwest National Laboratory)

In Situ Ambient Pressure X-Ray Photoelectron Spectroscopy Studies of Potassium-Oxygen Redox Reactions

W. Wang, Y. Wang (The Chinese University of Hong Kong), C. H. Wang, Y. W. Yang (National Synchrotron Radiation Research Center), and Y. C. Lu (The Chinese University of Hong Kong)

Performance Enhancement of Rechargeable Lithium-Sulfur Battery Utilizing High Mass-Loading Cathodes of Azulmic Carbon Composite

Y. Matsui (Kansai University), H. Hinago (Asahi Kasei Corporation), S. Yamazaki (Daikin Industries, Ltd.,), and M. Ishikawa (Kansai University)

P2-Na_0.66Li_0.18Fe_0.12 Mn_0.7O₂, a High-Performance Cathode Material for Sodium Ion Batteries

L. Yang (Georgia Institute of Technology), X. Li (Florida State University), J. Liu (Oak Ridge National Laboratory), S. Xiong, X. Ma, P. Liu (Georgia Institute of Technology), J. Bai (Brookhaven National Laboratory), W. Xu (Argonne National Laboratory), Y. Tang (Georgia Institute of Technology), Y. Y. Hu (National High Magnetic Field Laboratory), M. Liu, and H. Chen (Georgia Institute of Technology)

Effects of Fixed Redox Mediator in Air Electrode for Lithium-Air Batteries

Y. Hayashi (Tokyo University of Agriculture & Technology), R. Honda, M. Sohmiya (Department of Science and Engineering, Seikei University), Y. Takamuki (Tokyo University of Agriculture and Technology.), H. Otsuka (National Institute for Materials Science (NIMS)), K. Ito, Y. Kubo (National Institute for Materials Science), and M. Saito (Department of Science and Engineering, Seikei University)

In Situ Formed Li-B-H Complex Enables High-Performance Solid Electrolyte for Li Batteries

S. Zheng and Y. Pang (University of Shanghai for Science and Technology)

Nano-Sized Iron Oxide Material for Sodium Ion Batteries

W. Liu, L. Zhou, Y. Wang, Y. Li, B. Shi, R. Guo, H. Pei, and J. Xie (Shanghai Institute of Space Power-Sources)

Promising Lithium Metal Anode with Structured Design

S. H. Wu, W. H. Wu, C. H. Chao, C. C. Chang, and J. Fang (Industrial Technology Research Institute)

Impacts of Microstructures on the Ionic Diffusivity of Solid Electrolytes: Mesoscale Modeling Approach

T. W. Heo (Lawrence Livermore National Laboratory), A. Grieder (San Francisco State University), L. Wan (Lawrence Livermore National Laboratory), N. Adelstein (San Francisco State University), and B. C. Wood (Lawrence Livermore National Laboratory)