Z01 General Student Poster Session

M. Ambrosetti, D. Spada, M. C. Mozzati, B. Albini, P. Galinetto (University of Pavia), A. Cini, M. Fittipaldi (University of Florence), and M. Bini (University of Pavia)

2250

Understanding the Binder Systems Requirements for Silicon Graphite Composite Electrodes

K. Stokes, R. Azmi, M. Hahlin, and K. Edstrom (Uppsala University)

2251

Elucidating in-Situ Lithiation Pathway of Si-C Composite Anode in Lithium Ion Battery

H. J. Lee (Advanced Analysis Center, Korea Institute of Science and Technology, Department of Materials Science and Engineering, Korea University), H. K. Kim (Advanced Analysis Center, Korea Institute of Science and Technology), Y. W. Byeon (Materials Sciences Division, Lawrence Berkeley National Laboratory), and J. P. Ahn (Advanced Analysis Center, Korea Institute of Science and Technology)

2252

Unveiling the Effects of the Diffusivity and Exchange Current Density on the Electrochemical Modeling of Lithium-Ion Battery

H. Lee, S. Yang, S. Kim, J. Song, J. Park (Daegu Gyeongbuk Institute of Science and Technology), C. H. Doh, Y. C. Ha (Korea Electrotechnology Research Institute), T. S. Kwon (Korea Railroad Research Institute), and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)

2253

Robust Cycling of Ultrathin Li-Metal Enabled By Nitrate-Preplanted Li Powder Electrode

D. Jin (Daegu Gyeongbuk Institute of Science and Technology), Y. Roh (DGIST), M. H. Ryou (Hanbat National University), H. Lee (DGIST), and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)

2254

Nanoplates-Stacked Vanadium Oxide Cathode Employing Higher Kinetics and Stability in a Lithium-Ion Battery

K. Sim (Gwangju Institutue of Science and Technology) and K. Eom (Gwangju Institute of Science and Technology)

2255

An Inorganic-Rich SEI Layer Enabled By Hydrogen-Bonding-Catalyzed LiNO₃ Reduction for Stable Lithium Metal Batteries

S. Kim, K. Y. Cho, and K. Eom (Gwangju Institute of Science and Technology)

2256

Performance Estimation Method of Li-Ion Starting-Lighting-Ignition Batteries of Electric Vehicle through Lab-Scale Pouch Cell Experiment

H. Oh, N. Gil (Ulsan National Institute of Science and Technology), D. Kim (Hankook&Company), and K. M. Jeong (Ulsan National Institute of Science and Technology)

2257

Understanding Behavior of Cathode Active Materials with Different Particle Sizes in Mixed Electrode through Current Distribution Measurement

N. Gil and K. M. Jeong (Ulsan National Institute of Science and Technology)

2258

A Thermo-Electrochemical Model for Simulating Internal Short Circuits in a Li-Ion Battery Depending on Lithium Dendrites

S. Kim, J. Song, H. Lee, S. Jung, J. Park, and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)

2259

Study of Improving the Thermal Stability of Ceramic Coated Separator Via Chemical Crosslinking between Ceramic Particles and Polymeric Binders

Y. Roh, D. Jin, S. Byun (DGIST), M. H. Ryou (Hanbat National University), and Y. M. Lee (DGIST)

2260

3D Modeling on Diffusion-Dependent Graphite-Silicon Electrode for All-Solid-State Batteries

S. Jung (Daegu Gyeongbuk Institute of Science and Technology), J. Y. Kim (Electronics and Telecommunications Research Institute), J. Park, J. Song, and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)

2261

Diagnosis and Prognosis of the Aging of LTO/NMC Li-Ion Cells Under Cycling Tests

R. Brunetaud, K. Mergo Mbeya (SAFT Research - Bordeaux), J. M. Vinassa (IMS Laboratory – University of Bordeaux), A. Capitaine, O. Briat (IMS Laboratory - University of Bordeaux), and M. Dubarry (Hawaii Natural Energy Institute)

2262

Handling the Carbonates: Interfacial Engineering of Garnet Electrolytes

I. A. Cuevas, F. Nkosi, K. Edstrom, and M. Valvo (Uppsala University)

2263

A Low-Cost and Green Si-Based Anode Material for Lithium-Ion Batteries

A. Heitz, V. Vanpeene, N. Herkendaal, P. Soucy (Institut National de la Recherche Scientifique - EMT), T. Douillard (Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510), and L. Roué (Institut National de la Recherche Scientifique - EMT)

2264

Cold Plasma-Enhanced N-Doped Carbon Coating over MOF Endorsed Metal Oxide Nano Seed Embedded Carbon Fabric for Ultra-Long Life Flexible Energy Storage Application

R. M. Bhattarai, S. Saud, and Y. S. Mok (Jeju National University)

2265

Cost Effective and Sustainable Technique for Mangosteen Shell Derived Activated Carbon Electrode Materials for Supercapacitor Applications

V. N. Kitenge, D. J. Tarimo, K. Oyedotun, and N. Manyala (University of Pretoria)

2266

Thermal Modeling of a Lithium-Ion Battery Module for Energy-Storage Applications

D. Lee, S. Kang, B. Kim, and C. B. Shin (Ajou University)

2267

Li(Ni,Co,Mn)O₂ As Cathode Materials for Lithium Ion Batteries

L. Zhou (Wasatch Academy) and H. Luo (New Mexico State University)

2268

Towards a Mechanistic Explanation for Solid Electrolyte Interphase Formation in Lithium-Ion Batteries

E. W. C. Spotte-Smith, R. L. Kam (Lawrence Berkeley National Laboratory, University of California, Berkeley), D. Barter (Lawrence Berkeley National Laboratory), J. Self, X. Xie, T. Hou (Lawrence Berkeley National Laboratory, University of California, Berkeley), S. Dwaraknath (Luxembourg Institute of Science and Technology), S. M. Blau (Lawrence Berkeley National Laboratory), and K. A. Persson (Lawrence Berkeley National Laboratory, University of California, Berkeley)

2269

Computation-Based Investigation of Motion and Dynamics of Lithium in Phase Separated Silicon-Oxide Anode Materials

S. Chae (EWHA Womans university), H. K. Lim (Kangwon National University), and S. Lee (Ewha Womans University)

2270

An Improved Pre-Lithiation of Graphite Anodes Using through-Holed Cathode and Anode Electrodes in a Laminated Lithium Ion Battery

M. Yamada, T. Gunji (Kanagawa University), M. Tsuta, S. Nakamura (National Institute of Technology, Nagaoka College), N. Soma (Wired Co., Ltd.), N. Ando, and F. Matsumoto (Kanagawa University)

2271

An Improved High-Rate Discharging Performance of “Unbalanced” LiFePO₄ Cathodes with Different LiFePO₄ Loadings By a Grid-Patterned Micrometer Size-Holed Electrode Structuring

S. Harada, T. Gunji (Kanagawa University), M. Tsuta, S. Nakamura (National Institute of Technology, Nagaoka College), N. Ando (Kanagawa University), N. Soma (Wired Co., Ltd.), and F. Matsumoto (Kanagawa University)

2272

Atomistic Scale Analysis of Motion and Dynamics of Li-Ion in Li-Zn-Zr-S Compound Electrolyte

E. Kwon (Ewha Womans University), H. K. Lim (Kangwon National University), and S. Lee (Ewha Womans University)

2273

Introduction of Strategic Cost Management for Instrumentation Industry

V. Joshi and S. Paresh (Rai University)

2274

Concentration Profile Measurements Near the Anode during Lithium Metal Dissolution in Highly Concentrated Electrolyte

G. Kamesui (Hokkaido University), K. Nishikawa (National Institute for Materials Science), H. Matsushima, and M. Ueda (Hokkaido University)

2275

Nanoplates-Stacked Vanadium Oxide Showing the Improved Electrochemical Performances in a Lithium-Ion Battery

K. Sim (Gwangju Institutue of Science and Technology)

2276

Failure Mechanism of LiNi_0.6Co_0.2Mn_0.2O₂ Cathodes in Aqueous/Non-Aqueous Hybrid Electrolytes

L. Du (MEET Battery Research Center, University of Münster), X. Hou (IEK-12, Forschungszentrum Jülich GmbH), D. Berghus, R. Schmuch (MEET Battery Research Center, University of Münster), M. Winter (MEET Battery Research Center), J. Li (Politecnico di Milano), and T. Placke (MEET Battery Research Center, University of Münster)

2277

(Digital Presentation) Effects of Cation Doping on the Stability and Charge Acceptance of Alpha Nickel Hydroxide for Energy Storage Applications

T. Ilhan, T. A. Göynük, and I. Karakaya (Middle East Technical University)

2278

Redox Mechanism for Direct Recycling of End-of-Life Cathode Material

C. K. Kirwa (New Mexico State University, National Renewable Energy Laboratory)

2279

Effect of Surface Chemistry and Morphology on Polyluminol-Carbon Redox Active Composites

R. Bagchi, D. Yu, J. N'Diaye, J. Howe, and K. Lian (University of Toronto)

2280

Utilization of an α,β-Unsaturated Carboxylic Acid to Employ an “over Cutting” Mechanism for Defect Mitigation during Cu Post-Chemical Mechanical Planarization (p-CMP) Cleaning

A. L. Dudek, K. A. Cahue, and J. J. Keleher (Lewis University)

2281

Coupling Supramolecular Assemblies and Megasonic Energy for Improved p-CMP Cleaning of Silicon Carbide

M. M. Miliauskas, A. T. Caridi, R. J. Gentile, J. L. Powell, and J. J. Keleher (Lewis University)

2282

Understanding the Slurry/Substrate Interfacial Complexation Mechanism for Enhanced Silicon Carbide Removal (Cancelled)

2283

Recovery of Palladium through Anion Exchange Membranes Using Electrodialysis

Ö. Tekinalp (NTNU), P. Zimmermann, O. S. Burheim (Norwegian University of Science and Technology), and L. Deng (NTNU)

2284

Investigation of Bio-Electrochemical Interfaces Using Split-Cell Zero Resistance Ammetry Technique

A. Sadek (The University of Akron), C. Monty-Bromer (Cleveland State University), J. Senko, J. Davis (The University of Akron), and S. P. Chinthala (Cleveland State University)

2285

Electrochemical Desalination Using a Hybrid Redox Flow Cell

S. Singh, W. Lu, J. Sakamoto, and D. G. Kwabi (University of Michigan)

2286

Development of an Eam-Type Interatomic Potential Model Reproducing Theoretical Energetics in Polytype Structures

S. Ogane, R. Sato (Tohoku University), Y. Tanaka, K. Tsutsui (Nippon Steel Corporation), and K. Moriguchi (Tohoku University)

2287

(Digital Presentation) Degradation of Metronidazole in a Semi-Batch Reactor Employing BDD Electrodes

S. M. Maldonado, G. R. Morales, P. Balderas, and C. E. Barrera (Universidad Autónoma del Estado de México)

2288

A Novel Electrochemical Method to Extract Lithium from Aqueous Solutions

L. Brabson, P. W. Huang, A. Filippas, and N. Liu (Georgia Institute of Technology)

2289

A Co-Axial Microtubular Flow Battery with Ultra-High Volumetric Power

Y. Wu (Nanjing Tech University), A. Filippas, and N. Liu (Georgia Institute of Technology)

2290

Understanding of the Furfural Electrochemical Hydrogenation and Hydrogenolysis System in a Semi-Batch Reactor

A. S. May and E. J. Biddinger (The City College of New York, CUNY)

2291

Dispersity and Mechanical Strength Ni-TiO₂ Composites Electrodeposited Via Supercritical CO₂ Emulsified Electrolyte

Y. A. Chien, C. Y. Chen, M. Sone, and T. F. M. Chang (Tokyo Institute of Technology)

2292

The Effect of Graphene Hybridization for High-Efficiency Photoelectrochemical Water-Splitting of WO₃ Thin Film

A. Y. Cho and T. Choi (Sejong University)

2293

Single Crystal Copper and Gold Alloys for the Plasmonically Enhanced CO2 Reduction Reaction

A. Adserias and G. W. Leach (Simon Fraser University)

2294

Heterojunction Studies of Si/CuInO_xFilms (Cancelled)

2295

Cathodic Pd_1-XNi_X Nanocatalyst Development for Alkaline Fuel Cell Applications

M. Schneider-Coppolino, A. Taylor, A. M. Kilham, S. Gautam, S. Tahmasebi, and B. D. Gates (Simon Fraser University)

2296

Utilizing Advanced Bipolar Membranes in Next Generation Electrodialysis Systems (Cancelled)

2297

Electrolysis Reference Electrode Methodology, and Electrochemical Modelling Applications

A. McLeod (The University of British Columbia), L. V. Buehre (Leibniz University Hannover), and W. Mérida (University of British Columbia)

2298

Optimizing the Electron Transfer Efficiency in a Conductive Biomimetic Polymer Electrode for Microbial Fuel Cell Applications

I. Deninger, C. J. Shanahan, A. K. Sran, and J. J. Keleher (Lewis University)

2299

Analysis of a Gel-like State of Nickel Hydroxide Created By Electrochemical Aging

A. L. Pauls, M. T. Y. Paul, R. F. Ali, and B. D. Gates (Simon Fraser University)

2300

Niobium Oxide Coated Mesoporous Platinum Nanoparticles for the Oxygen Reduction Reaction

A. M. Kilham, S. Gautam, and B. D. Gates (Simon Fraser University)

2301

Maximizing the Formate Formation of CO₂ Electroreduction Via Boosting Charge Transfer Ability

P. F. Sui (University of Alberta), C. Xu (Univeristy of Alberta), M. Zhu, S. Liu, and J. L. Luo (University of Alberta)

2302

Unraveling the Effects of Size and Relative Degree of Surface Reconstruction on the Magnetic Field-Rendered Oxygen Evolution Reaction Activity Enhancement of CoFe₂O₄ Nanoparticles

C. Sewell, M. Zhang, M. Mourigal, and Z. Lin (Georgia Institute of Technology)

2303

Integrated CO₂ Capture and Electroreduction Using a Hydrophobic Zn-Based MOF As Catalyst

M. Molina Fabra, G. Shimizu, and M. G. Kibria (University of Calgary)

2304

Development of Reversible Ni-Fe Metal Supported Solid Oxide Cells

D. Park, D. Kang, and J. Myung (Incheon National University)

2305

Co-Exsolution Method Via Seeded Effect for Catalytically Active Anode in Protonic Ceramic Fuel Cells

N. H. Lee, K. Y. Lee, Y. H. Kim (Department of materials science and engineering, Incheon National University), S. Jo (Energy & Environmental Division, Korea Institute of Ceramic Engineering and Technology), and J. H. Myung (Incheon National University)

2306

Electrochemically Deposited Tin on High Surface Area Copper Foam for Enhanced Electrochemical Reduction of CO₂ to Formic Acid

S. R. P. Yadavalli, A. K. Chandiran (Indian Institute of Technology Madras (IITM)), and R. Chetty (Indian Institute of Technology Madras)

2307

Nickel-Molybdenum Carbide/Nitrogen-Doped Carbon Mott-Schottky Nanoarray for Water Spitting

Z. Xu and X. Wang (University of Alberta)

2308

Combining Promising Electrolyte Research and 3D Printing: Ionic Liquid Based Printable Membrane Materials

A. Lange, K. Zehbe (University of Potsdam), K. Elamin, I. Abdurrokhman (Chalmers University of Technology), Z. Wojnarowska, M. Paluch (University of Silesia in Katowice), and A. Taubert (University of Potsdam)

2309

Suppression of the Platinum Active Sites Poisoning By Perfluorinated Sulfonic-Acid Ionomer Via High Surface Area Carbon Supports

M. Lee (Korea Institute of Energy Research), W. Y. Choi, H. Choi (Hanyang University), S. W. Choi (Gwangju Institute of Science and Technology), Y. J. Park (Hanyang University), Y. G. Yoon, and C. Y. Jung (Korea Institute of Energy Research)

2310

Engineering the Heterogeneous Interface of Sulphur Doped Nickel-Manganese Oxide for Efficient Overall Electrochemical Water Splitting

C. Madan and A. Halder (Indian Institute of Technology Mandi)

2311

Measurements of the Average Droplet Charge Using a Low Density Stream of Microdroplets in Atmospheric Pressure Plasma Jet

N. Hendawy, H. McQuaid (Ulster University), D. Rutherford (Czech Technical University), D. Diver (Glasgow University), D. Mariotti, and P. Maguire (Ulster University)

2312

Mixed Metal Ni(M)/YSZ for High-Temperature CO₂ Electroreduction to CO

V. Kamboj (Department of Inorganic and Physical Chemistry, IISc, INDIA) and C. Ranjan (Indian Institute of Science)

2313

Multi-Scale Modeling of Hydrogen Transport in a Porous Fuel Cell Anode

R. Zhang, A. Chowdhury, J. C. Bui (University of California, Berkeley, Energy Technologies Area, Lawrence Berkeley National Lab), C. J. Radke (University of California, Berkeley), and A. Z. Weber (Energy Technologies Area, Lawrence Berkeley National Laboratory)

2314

Two-Phase Flow Membraneless Microfluidic Energy Conversion Devices for Hydrogen Generation and Micropower Application

B. S. De, N. Khare (Indian Institute of Technology (IIT) Delhi), A. Elias (University of Alberta), and S. Basu (Indian Institute of Technology Delhi, India)

2315

Ethanol Electro-Oxidation on Carbon-Supported PtRuCu/C Catalyst in a Proton Exchange Membrane Electrolysis Cell

D. A. Alqdeimat and P. Pickup (Memorial University of Newfoundland)

2316

Ethanol and Methanol Electrolysis at Core-Shell Ru@Pt and PtRu@Pt Catalysts with Different Pt Shell-Thickness

A. H. Ali (Memorial University Canada, Alexandria University Egypt) and P. Pickup (Memorial University of Newfoundland)

2317

Characterizing the Antimicrobial Effectiveness of Ag-TiO₂ and Cu-TiO₂ Nanoparticles Utilizing an Epifluorescence Optical Tweezer

C. E. Rogers III, A. K. Sran, K. M. Sheets, and J. J. Keleher (Lewis University)

2318

Alginate/Polyethyleneimine-Based Nitric Oxide-Releasing Hydrogel As a Potential Platform to Study the Effects of NO on Carcinogenesis

S. Maher, H. Kalil (Cleveland State University), and M. Bayachou (Cleveland State University, Inflammation and Immunity Department, Cleveland Clinic)

2319

Investigation of Temperature-Triggered Collapse of Surface-Bound ELP

S. Feeney (University of New Hampshire), E. R. M. Balog (University of New England), and J. M. Halpern (University of New Hampshire)

2320

Electrochemical Hydrogenation of Aromatic Hydrocarbons

B. Markunas and J. D. Snyder (Drexel University)

2321

Electrooxidation of Platinum

C. Yuan (University of Victoria), T. Fuchs (Kiel University), S. Cherevko (Forschungszentrum Jülich GmbH), J. Drnec (European Synchrotron Radiation Facility), O. M. Magnussen (Kiel University), and D. A. Harrington (University of Victoria)

2322

Electrokinetic Preconcentration and Label-Free Electrical Detection of Sars-Cov-2 RNA at a Packed Bed of Bioconjugated Microspheres

E. L. Claus, M. Strait, and R. K. Anand (Iowa State University)

2323

Measuring DNA Charge Transport on a Surface Using a Redox Modulated Fluorescence Intensity Strategy with DNA SAMs

T. Ma (Univerisity of British Columbia) and T. Ma (University of British Columbia)

2324

The Contribution of Ionic Electrochemical Potential to the Contact Potential Difference on Mixed Ionic-Electronic Conductors Measured By Kelvin Probe Force Microscopy

F. Weber, C. Zhu, and R. Berger (Max Planck Institute for Polymer Research)

2325

Study of M(hkl)| Ionic Liquid Interfaces in Well-Defined Surroundings

P. Jordà-Faus, E. Herrero, and R. Arán-Ais (Universidad de Alicante)

2326

Electrochemical Versus Chemical Oxidation of 2,6-Diphenylphenol

S. Gao and S. Martic (Trent University)

2327

(Digital Presentation) Improved Nanocatalysts, Supported IrO_x and IrRuO_x, for Enhanced Oxygen Evolution Reaction

A. Bornet, E. Berner (University of Bern), J. Quinson (University of Copenhagen), J. Schröder, and M. Arenz (University of Bern)

2328

Effect of the Geometry on the Mass Transfer Enhancement at Conical W/WO₂ Ultramicroelectrodes

U. Bruno-Mota (Institut National de la Recherche Scientifique – EMT), I. N. Rodriguez-Hernández (Centro de Investigación y Desarrollo Tecnológico en Electroquímica), R. Doostkam (Institut National de la Recherche Scientifique – EMT), P. Soucy (Institut National de la Recherche Scientifique - EMT), F. Navarro-Pardo (Institut National de la Recherche Scientifique – EMT), G. Orozco (Centro de Investigación y Desarrollo Tecnológico en Electroquímica), A. Yurtsever, and A. Tavares (Institut National de la Recherche Scientifique – EMT)

2329

AuCu Nanostructures Active in the Visible Light – Optical and Photoelectrochemical Properties

W. Lipinska, K. Grochowska (The Szewalski Institute of Fluid-Flow Machinery PASci), J. Karczewski (Gdansk University of Technology), and K. Siuzdak (The Szewalski Institute of Fluid-Flow Machinery PASci)

2330

Room Temperature, Ambient Pressure Synthesis of Urea By Electrolysis and Its Accurate and Consistent Measurement

J. Akther (Memorial University of Newfoundland), C. Song, K. Tsay, K. Fatih (National Research Council Canada), and P. Pickup (Memorial University of Newfoundland)

2331

Modifying Small Proteins to Create a Novel Protein-Electrode Sensing Interface

S. Dey, D. Woldring, and D. Hickey (Michigan State University)

2332

Development of a Label-Free Immunosensor for Quantitative, Electrical Detection of Target Antigens

S. Osman, E. L. Claus, M. Strait, and R. K. Anand (Iowa State University)

2333

Development of a Novel Lateral Flow Immunoassay for Detection of Harmful Allergens Found in Dust

E. R. Hessick, K. Dannemiller, and P. Gouma (The Ohio State University)

2334

Role of Machine Learning in Conventional Hydrocarbon Exploration: A Case Study of Pakistan

M. B. Malik (Quaid-i-Azam University), S. Afgan (University of The Punjab), P. W. S. Rathore (Quaid-i-Azam University), and M. A. Haider (University of The Punjab)