E01 - Electrodeposition for Energy Devices

Thursday, 13 October 2022: 14:00-17:20
Room 301 (The Hilton Atlanta)
Chairs:
Fikile R. Brushett , Philippe M. Vereecken and Andreas Bund
14:00
Characterization of Protective Coatings on Stainless Steel Bipolar Plates for PEM Electrolyzers
M. Leimbach (Technische Universität Ilmenau), M. Kurniawan (TU Ilmenau), C. P. Zimmermann, C. E. Höß, M. Fritz (Technische Universität Ilmenau), and A. Bund (TU Ilmenau)
14:20
Electrodeposition and Characterization of a Selective Coating on Aluminum for Scale-up in Thermo-Solar Applications
M. Cetina-Dorantes, F. Lizama-Tzec (Department of Applied Physics, CINVESTAV-IPN Unidad Mérida, México), D. Herrera-Zamora, O. García-Valladares, V. Gómez-Espinoza (Department of Energy Systems, IER-UNAM, México), G. Rodriguez Gattorno, and G. Oskam (Department of Applied Physics, CINVESTAV-IPN Unidad Mérida, México)
14:40
Electrochemical Reduction of Iron Oxide - Produced from Iron Combustion - for the Valorization of Iron Fuel Cycle
A. I. Majid (Technische Universiteit Eindhoven), Y. Tang, G. Finotello, J. van der Schaaf, and N. G. Deen (Technische Universiteit Eindhoven, Eindhoven Institute of Renewable Energy System (EIRES))
15:00
Regulating Electrochemical Growth of Metals at Rechargeable Battery Electrodes
J. Zheng (Massachusetts Institute of Technology), L. A. Archer (Cornell University), and J. Checkelsky (Massachusetts Institute of Technology)
15:20
Electrodeposition of Cu-Based Nanofoams and Sodiophilic Metals for Highly Stable Anode-Free Sodium Batteries
A. Accogli, L. Bertoli, A. Mellina Gottardo, G. Panzeri, and L. Magagnin (Politecnico di Milano)
15:40
Break
16:00
Electrodeposition of Redox Active Insulators
C. Prehal (ETH Zürich), S. Mondal, and S. A. Freunberger (Institute of Science and Technology Austria (ISTA))
16:20
Electrodeposition of Lithium Manganese Oxide Cathodes for Lithium-Ion Batteries
M. Manjum, G. Jalilvand, and W. E. Mustain (University of South Carolina)
17:00
Crack-Free Ni-P Film for Power Devices
Y. Fujimori (Yamato Denki Industrial Co., Ltd.), M. Shimizu (Shinshu University), T. Kurashina (Yamato Denki Industrial Co., Ltd.), and S. Arai (Shinshu University)