A04 Poster Session

Wednesday, 3 October 2018: 18:00-20:00
Universal Ballroom (Expo Center)
249
Discussing the Homogeneity of Aluminum Distribution in LiCo1‑­YAlyO2 for Low Doping Amounts (y ≤ 0.04)
M. Duffiet (ICMCB - CNRS, Univ. Bordeaux, Pessac, France, Umicore R&D, Cheonan, Korea), M. Blangero (Umicore R&D, Cheonan, Korea), P. E. Cabelguen (Umicore R&D, Brussels, Belgium), C. Delmas (CNRS, Université de Bordeaux, ICMCB), and D. Carlier (CNRS, Université Bordeaux, Bordeaux INP, ICMCB UPR 9048)
250
Aerosol Chemical Vapor Deposition of One-Dimensional Cu-Doped TiO2 Nanostructured Anodes for High-Rate Lithium Ion Batteries
C. T. Kacica (Washington University in St Louis) and P. Biswas (Washington University in St. Louis)
252
Improving the Cycling Performance of Lithium Ion Batteries Silicon/Graphite Anodes Using PI Binder
J. Oh (Hanbat national Unveristy), D. Jin, H. Jo (Hanbat National University), J. Park (Department of Chemical and Biological Engineering), B. Yoon, J. Choi, S. Kim, and M. H. Ryou (Hanbat National University)
254
Thermally Treated Sodium Carboxymethyl Cellulose Binder for Si Alloy Anodes
Z. Yan and M. N. Obrovac (Department of Chemistry, Dalhousie University)
 
255
High Voltage LiNi1/2Mn3/2O4 Kinetics and Thermodynamics Properties (Cancelled)
256
In-Situ AFM Measurements on Lithium Metal Anodes
S. Benning and F. Hausen (Forschungszentrum Jülich)
257
Facile Synthesized Nanoporous Si/C Anode for High Power and Energy Applications
C. W. Min, A. Nazir, and C. J. Park (Chonnam National University)
258
SLMP® for Pre-Lithiation and Ultra-Thin Lithium Foil Anode Applications
B. Fitch and M. Yakovleva (FMC Corporation, Lithium Division)
259
High Voltage Spinel LiNi 1/2Mn3/2O4 : Kinetics and Thermodynamics Properties
P. Dumaz (LEPMI), C. Rossignol (Université Grenoble Alpes-CNRS), and R. Bouchet (LEPMI, CNRS/University of Grenoble)
260
Influence of the Structure of Parent Materials in Blended Li2CuO2-Limx Cathodes, Limx = LiFePO4, LiCoO2 and LiMn2O4
C. Juarez-Yescas, G. Guzmán, L. F. Santiago-Ruiz, F. J. Osorio-Santiago, C. I. López-Vicente (Universidad Autónoma Metropolitana Iztapalapa), G. Ramos-Sánchez (CONACyT-UAM I), and I. González (Universidad Autónoma Metropolitana Iztapalapa)
261
Estimating and Identifying Parameters from Discharge Curves of Lithium-Ion Batteries
H. Mashioka, G. Inoue, and Y. Tsuge (Kyushu University)
262
Study of the Influence of Carbon Additive Content in LiMn0.5Ni1.5O2 Cathodes in Lithium Ion Batteries
G. Guzmán (Universidad Autónoma Metropolitana - Iztapalapa), L. Diaz-Chavez (Universidad Autónoma Metropolitana), G. Ramos-Sánchez (CONACyT-UAM I), and I. González (Universidad Autónoma Metropolitana iztapalapa)
263
Dendrite Formation in Silicon and Li-Metal Anodes in Lithium-Ion Batteries
L. Selis and J. Seminario (Texas A&M University)
264
Strategic Architecture of Silicon Nanolayer-Embedded Graphite Hybrid for High Energy Lithium-Ion Battery Anodes
M. Ko (Pukyong National University), P. Oh (PUKYONG National university), and J. I. Jung (Chosun Refractories Co.,Ltd.)
265
A Novel Material Design for Li-Rich Cathode Material’s Long-Term Cycling and High Volumetric Energy Density
P. Oh (PUKYONG National university), M. S. Ko (PUKYONG National University), and J. I. Jung (Chosun Refractories Co.,Ltd.)
266
Effect of RGO Coating of Li-Rich Cathode Material on Electrochemical Performance
S. N. Lim, K. Kim, and S. A. Song (Korea Institute of Industrial Technology)
267
Battery Performance Analysis Combined with Circuit Simulation and Electrochemical Calculation
A. Kono, M. Tokito, K. Sato, H. Urushibata, and Y. Fujita (Kanazawa Institute of Technology)
 
268
Li K-edge X-ray Absorption Near Edge Structure Spectra for a Library of Lithium Compounds Applied in Lithium Batteries (Cancelled)
269
Novel Battery Design Principles for Highly Safe, High Energy Density Lithium Ion Battery Using Less Volatile Electrolyte
A. Unemoto, E. Seki, H. Konishi (Research and Development Group, Hitachi, Ltd.), K. Nishimura (Hitachi, Ltd., Research&Development Group), J. Kawaji (Research and Development Group, Hitachi, Ltd.), and T. Okumura (Hitachi, Ltd., Research&Development Group)
270
Comparison of Battery Degradations Induced By Different Synthetic Driving Cycles and Real-World Traffic Conditions
G. Baure and M. Dubarry (University of Hawaii, Hawaii Natural Energy Institute)
271
Li[Ni0.865Co0.120Al0.015]O2 Cathode with Compositional Gradation for High-Energy and Long-Life Lithium-Ion Batteries
K. J. Park, G. T. Park, and Y. K. Sun (Department of Energy Engineering, Hanyang University)
273
Improving High Rate Electrochemical Performance of Patterned Lithium Metal Anode for Lithium Secondary Batteries By Using Dual Salt Electrolyte System
B. Yoon, S. Kim, D. Jin, J. Park (Hanbat National University), J. Oh (Hanbat national Unveristy), H. Jo, J. Choi, and M. H. Ryou (Hanbat National University)
274
Effect of LiNO3 Electrolyte Additives for Improved the Rate Capability of Micro-Patterened Lithium Metal Anode
D. Jin (Hanbat National University), J. Oh (Hanbat national Unveristy), B. Yoon, J. Park (Hanbat National University), Y. M. Lee (DGIST), and M. H. Ryou (Hanbat National University)
275
Study on Separator / Lithium Metal Integration for Improving Performance of Lithium Metal Battery
J. Choi (Hanbat National University), J. Oh (Hanbat national Unveristy), D. Jin, S. Kim (Hanbat National University), J. Park (Department of Chemical and Biological Engineering), B. Yoon, H. Jo, and M. H. Ryou (Hanbat National University)
276
Study on Dead Li Suppression Mechanism of Li Hosting Carbon-Based Protective Layer for Li Metal Anodes
H. Jo, S. Kim, D. Jin (Hanbat National University), J. Oh (Hanbat national Unveristy), J. Choi, B. Yoon (Hanbat National University), J. Park (Department of Chemical and Biological Engineering), and M. H. Ryou (Hanbat National University)
277
Structural Effect of Conductive Carbons on the Adhesion and Electrochemical Behavior of NMC-442 Cathode for Lithium Ion Battery
M. Latifatu (Hanbat National University), C. S. Yoon (Hanbat.National Universty), and J. M. Ko (Hanbat National University)