B-2.1 MEA and Cell Fabrication and Optimization

Tuesday, 2 October 2018: 08:30-12:10
Star 7 (Sunrise Center)
Chairs:
Karen Swider-Lyons and Mahlon S. Wilson
08:30
1419
Total Cost of Ownership of Fuel Cell Electric Vehicles Using Expert Assessments
M. M. Whiston, I. Azevedo, S. Litster, K. Whitefoot, C. Samaras, and J. Whitacre (Carnegie Mellon University)
08:50
1434
Membrane-Electrode-Assemblies with Electrospun Fiber Mat Electrodes for Hydrogen/Air Fuel Cells
J. Slack, K. Waldrop, R. Wycisk (Vanderbilt University), C. Gumeci, N. Dale (Nissan Technical Center North America), and P. N. Pintauro (Vanderbilt University)
09:10
1435
The Impact of Compression on PEM Fuel Cell Performance at High Power
K. Swider-Lyons (U.S. Naval Research Laboratory), Y. Garsany (EXCET Inc.), C. J. Netwall, R. W. Atkinson III, B. D. Gould, and M. B. Sassin (U.S. Naval Research Laboratory)
09:30
1436
Impact of Gas Diffusion Layer Mechanics on PEM Fuel Cell Performance
P. Irmscher, D. Qiu (IEK-3 Forschungszentrum Jülich GmbH), H. Janßen (IEK-3, Forschungszentrum Jülich GmbH), W. Lehnert (RWTH Aachen University), and D. Stolten (Forschungszentrum Jülich GmbH)
09:50
1437
Coupling of Lattice Boltzmann and Volume of Fluid Approaches to Study the Droplet Behavior at the Gas Diffusion Layer/Gas Channel Interface
M. Andersson (Lund University, Forschungszentrum Jülich GmbH), S. B. Beale (Forschungszentrum Jülich GmbH, Queen's University), D. Froning, J. Yu (Forschungszentrum Jülich GmbH), and W. Lehnert (RWTH Aachen University, Forschungszentrum Jülich GmbH)
10:10
Break
10:30
1438
Fuel Cell Electrodes Based on Functional Meso-Structured Arrays
J. S. Spendelow (Los Alamos National Laboratory), S. Komini Babu (Carnegie Mellon University), R. Mukundan, R. L. Borup (Los Alamos National Laboratory), D. A. Cullen, and K. L. More (Oak Ridge National Laboratory)
10:50
1439
Analysis of Degradation Mechanisms and Durability Assessment of Graphene-Based Mpls for PEM Fuel Cells
S. Latorrata, P. Gallo Stampino, L. Scandola, C. Cristiani, and G. Dotelli (Politecnico di Milano)
11:10
1440
Injection Molding of Carbon Nanotube-Filled, Polymer Composite Bipolar Plates
M. L. Sander (Penn State Behrend), J. T. Pritts (Penn State University), B. A. Young (Penn State Behrend), A. D. Santamaria (Western New England University), and A. S. Hollinger (Penn State Behrend)
11:30
1441
CVD Catalyzed PEM Fuel Cell and Electrolyzer Electrodes
M. S. Wilson, K. Chintam, R. Mukundan, N. Macauley (Los Alamos National Laboratory), K. L. More (Oak Ridge National Laboratory), S. Kabir, and K. C. Neyerlin (National Renewable Energy Laboratory)
11:50
1442
Preliminary Study On The Development Of Sulfonated Graphene Oxide Membranes As Potential Novel Electrolytes For PEM Fuel Cells
S. Latorrata, A. Basso Peressut, P. Gallo Stampino, C. Cristiani, and G. Dotelli (Politecnico di Milano)
See more of: I01B: Polymer Electrolyte Fuel Cells and Electrolyzers 18 (PEFC&E 18) - Cells, Stacks and Systems
See more of: Fuel Cells, Electrolyzers, and Energy Conversion
<< Previous Session | Next Session >>