Industrial Electrochemistry and Electrochemical Engineering General Session

Tuesday, May 13, 2014: 08:25-18:00
Bonnet Creek Ballroom II, Lobby Level (Hilton Orlando Bonnet Creek)
Chairs:
Gerardine G. Botte , John W. Weidner and E. J. Taylor
08:25
Welcoming Remarks
08:50
535
Electrochemical Cell Design with Controlled Hydrodynamics for Uniform Processing
H. Garich, S. Snyder, E. J. Taylor (Faraday Technology, Inc.), C. Davidson, and R. Kumar (Viasystems Group, Inc.)
09:10
536
Evolutionary Development for Electrokinetic Dewatering of Phosphate Mine Tailings
R. Kong, M. E. Orazem, Y. Huang, D. Yu, H. Lai, S. Moghaddam, and D. Bloomquist (University of Florida)
09:30
Break
10:00
537
Electropolishing of Kovar Alloy for Vacuum Applications
Y. Dündar (Gazi University, Middle East Technical University), G. Demirci (Aselsan Inc.), M. Erdogan (Yildirim Beyazit University), and I. Karakaya (Middle East Technical University)
10:20
538
Growth of Oxide Nanotube Arrays on Ti-Ni Alloy
M. S. Kim, H. Tsuchiya, and S. Fujimoto (Osaka University)
10:40
539
Electrochemical Palladium Deposition on Titanium Nitride, Ruthenium and Palladium Substrates for Nanoscale Device Fabrication
A. Sahin, J. M. Cotte, Q. Huang, and B. Baker-O'Neal (IBM, T. J. Watson Research Center)
11:00
540
Bismuth Doped TiO2 Functionalized Hetero-Junction Semiconductor Anode with an Enhanced Reactive Chlorine Generation for Use in Electrochemical Wastewater Treatment
K. Cho (Korea Institute of Science and Technology, California Institute of Technology) and M. R. Hoffmann (California Institute of Technology)
11:20
541
Membrane Assisted Capacitive Deionization with Binder-Free Carbon Xerogel Electrodes
A. Omosebi, X. Gao, J. Landon, and K. Liu (University of Kentucky)
11:40
542
Electrodeposition in Ionic Liquids for Fission Product Recovery
E. J. Biddinger, S. Shrestha, E. Gjoka (Department of Chemical Engineering, City College of New York), and T. K. Shillingford (Department of Earth System Science & Environmental Engineering, City College of New York)
12:00
Break
 
544
Kinetic Model for Anode of a Direct Carbon Fuel Cell (Cancelled)
14:40
545
H2-Br2 Fuel Cell Performance with High Surface Area Bromine Electrode Materials
V. Yarlagadda and T. V. Nguyen (The University of Kansas)
 
546
The Effect of SnO2-Sb Interlayer on the Physicochemical Properties of Electrodeposited Ti/PbO2 Electrodes (Cancelled)
16:00
Intermission
16:20
549
ECS Student Achievement Award of the IEEE Division Integration of a 2+1D Kinetic Monte Carlo Algorithm with Continuum Models for SEI Layer Analysis of Lithium-Ion Batteries
P. W. C. Northrop (Department of Energy, Environmental and Chemical Engineering, Washington University in St. Louis), V. R. Subramanian (Washington University-St. Louis), and R. D. Braatz (Department of Chemical Engineering, Massachusetts Institute of Technology)
17:00
551
A Study of Photo Resist Compatibility to Copper Bath during Applied Current
U. H. Lee, H. N. Park (Samsung Electronics, Thin Film Technology Team), Y. Morishima, T. Hatsukade, T. Takahashi (Adeka, Electronic Materials Development Laboratory), J. Choi, and J. Won (Thin film technology team, Memory Division, Samsung electronics)
17:20
552
Gravitational Effects on the Initial Stage of Cu Electrodeposition
H. Inari, Y. Konishi (Kyoto University), R. Alkire (University of Illinois), T. Homma (Waseda University), and Y. Fukunaka (Waseda University, CREST, JST and JAXA)
17:40
553
Effect of Copper Particle Size on the Product Distribution of the Electrochemical Reduction of CO2
J. Ethier (Florida State University) and E. E. Kalu (Florida A&M University - Florida State University College of Engineering)