Stainless Steels and High Corrosion Resistant Alloys I

Monday, October 12, 2015: 09:00-12:20
102-A (Phoenix Convention Center)
Chair:
Shinji Fujimoto
09:00
672
Stress Corrosion Cracking of Sensitized 304 Stainless Steel Under MgCl2 Droplets
K. Nakao, E. Tada (Tokyo Institute of Technology), and A. Nishikata (Tokyo Institute of Technology)
 
673
Investigation of Pitting on Stainless Steel Using Scanning Electrochemical Microscopy (Cancelled)
 
674
in-Situ Critical Pitting Temperature on Duplex Stainless Steels (Cancelled)
10:00
675
The Effect of Biofilm Formation in Singapore Seawater on Corrosion of Metal and Alloys: New Observations and Concepts
S. L. Wijesinghe (Singapore Institute of Manufacturing Technology,), Z. Tan (Singapore Institute of Manufacturing Technology,), D. Thierry (French Corrosion Institute), N. Larche (French Corrosion Institute), S. Teo (National University of Singapore), and D. J. Blackwood (National University of Singapore)
10:20
Intermission
 
676
Pit Initiation and Growth on Stainless Alloys in Solutions Containing Sulfate and/or Chloride, and Thiosulfate (Cancelled)
11:00
677
Diffusion-Limited 1D Pit Growth of S13Cr in Brine at Elevated Temperature
J. Jun (Fontana Corrosion Center, The Ohio State University), G. Frankel (Fontana Corrosion Center, The Ohio State University), and N. Sridhar (DNVGL)
11:20
678
Experiments Based on One-Dimensional Diffusion Modeling to Determine Critical Factors in Pitting
J. Srinivasan (University of Virginia) and R. G. Kelly (University of Virginia)
11:40
679
Microelectrochemical Investigation of Pit Initiation Site on Austenitic Cast Stainless Steel
A. Otake (Department of Materials Science, Tohoku University, Kawasaki Heavy Industries, Ltd.), I. Muto, A. Chiba (Department of Materials Science, Tohoku University, National Institute for Materials Science (NIMS)), Y. Sugawara (Department of Materials Science, Tohoku University), and N. Hara (Department of Materials Science, Tohoku University)
12:00
680
Effect of Low-Temperature Carburizing Treatment on Improving Pitting Corrosion Resistance at Manganese Sulfide Inclusion in Type 304 Stainless Steel
A. Chiba (National Institute for Materials Science (NIMS)), S. Shibukawa (Institute for Materials Research, Tohoku University), I. Muto (Department of Materials Science, Tohoku University), T. Doi (Nippon Steel & Sumitomo Metal Corporation), K. Kawano (Nippon Steel & Sumitomo Metal Corporation), Y. Sugawara (Department of Materials Science, Tohoku University), and N. Hara (Department of Materials Science, Tohoku University)
See more of: C05: Critical Factors in Localized Corrosion 8
See more of: Corrosion Science and Technology
<< Previous Session | Next Session >>