There has been growing interest in development of new methods for the determination of arsenic due to its high toxity and increasing population in the environment. Electrochemical methods for the determination of arsenic can be considered as complimentary to spectroscopic and chromoatographic ones because they are fairly simple and they are subject to different selectivity criteria. In this respect, various stripping voltammetric procedures are becoming popular. The actual stripping voltammetric measurement consists of two steps in which preconcentration of an analyte at the electrode surface is followed by the so called „stripping” step involving electrode reaction recorded in a form of the voltammetric peak. A representative approach involves reduction of the analyte anions upon application of the sufficiently negative potential to form As(0) on the electrode (e.g. gold) surface; this step is followed by voltammetric oxidation (anodic stripping) of the deposit (to As(III)). In a case of so called cathodic stripping voltammetry, the stationary Hanging Mercury Drop Electrode (HMDE) is often used. During the preconcentration step, an insoluble salt (e.g. Cu₃As₂) is produced on the electrode surface.

Because sensitivity and detection limit in electroanalytical determinations strongly depend on the current densities measured, there is a need to search for specific catalytic materials that would induce otherwise highly slow and irreversible redox processes of As(III) (oxidation) and, in particular, As(V) (reduction). Our research interests concern development of highly specific catalytic systems leading to the enhancement of the electrooxidation of arsenic (III). We explore here the capability of various noble metals nanoparticles (Pt, Rh, Pd) of inducing the arsenic(III) oxidation in acidic medium. The recorded currents have been compared to those observed previously at the electrodes modified with oxocyanoruthenates, the most potent system for the electrocatalytic oxidation of As^III(OH)₃. Reduction of arsenic (V) is even the more inert reaction. Network films of bimetallic (PtRu) nanoparticles (bare and derivatized) permit preconcentration of arsenic(V) species on their surfaces. The stripping step would allow determination of low concentrations of arsenic (10^-6 mol/dm^-3 or lower).