The development of electric vehicles (EVs) and stationary energy storage demands rechargeable batteries with improved electrochemical performance. The lithium-sulfur (Li-S) battery is considered as the competitive candidate to replace the conventional Li-ion batteries based on the intercalation mechanism in the near future because the Li-S system can deliver a high energy density of ~2600 Wh/kg with low cost.^1-3

The crucial challenge for commercializing Li-S batteries is the shuttle effect caused by the dissolution and migration of polysulfides (PSs), which can corrode metallic Li anode and result in the irreversible capacity loss. To prohibit the shuttle effect, S particles, even smaller S_2-4 molecules, are confined in nanopores for trapping PSs.^4-8 However, the lithiation of the sulfur active material always suffers from enormous volume expansion, and resulting mechanical degradation of the host material.⁹

Using Li₂S to fabricate the Li-S battery cathode may be a promising approach to improve the battery performance.¹⁰ Previous studies on Li-O₂ batteries showed that the amorphous Li₂O₂ has faster charge transfer kinetics than the crystalline Li₂O₂.^{11, 12} The charge transport mechanism in amorphous Li₂S is not clearly understood. According to our first-principles calculations, the formation energies of charged defects in the amorphous Li₂S is lower than those in the crystalline phase. Given that the charged defects are charge carriers in Li₂S, the cathode fabricated by amorphous Li₂S is expected to exhibit faster kinetics.

Also, we investigate the delithiation process of ultra-small Li₂S nanoparticle. It is found that the polaron as the charge carrier can even form in the ultra-small nanoparticle. Although the overall delithiation process can be considered as an oxidization process, local reduction reactions and the disproportionation reaction are observed in intermediate products. The final charging product can even be a cyclo-S₁₀ ring. This study is expected to provide new insight into designing nanostructured active materials for Li-S batteries.

References

1. Yin, Y.-X.; Xin, S.; Guo, Y.-G.; Wan, L.-J. Angewandte Chemie-International Edition 2013, 52, (50), 13186-13200.
2. Son, Y.; Lee, J.-S.; Son, Y.; Jang, J.-H.; Cho, J. Advanced Energy Materials 2015, 5, (16).
3. Pang, Q.; Liang, X.; Kwok, C. Y.; Nazar, L. F. Nature Energy 2016, 1.
4. Yang, Y.; Zheng, G.; Cui, Y. Chemical Society Reviews 2013, 42, (7), 3018-3032.
5. Chen, H.; Shen, Y.; Wang, C.; Hu, C.; Lu, W.; Wu, X.; Chen, L. Journal of The Electrochemical Society 2018, 165, (1), A6034-A6042.
6. Liu, Z.; Mukherjee, P. P. Acs Applied Materials & Interfaces 2017, 9, (6), 5263-5271.
7. Liu, Z.; Balbuena, P. B.; Mukherjee, P. P. Journal of Physical Chemistry Letters 2017, 8, (7), 1324-1330.
8. Liu, Z.; Balbuena, P. B.; Mukherjee, P. P. Journal of Physical Chemistry C 2017, 121, (32), 17169-17175.
9. Barai, P.; Mistry, A.; Mukherjee, P. P. Extreme Mechanics Letters 2016, 9, 359-70.
10. Hu, C.; Chen, H.; Xie, Y.; Fang, L.; Fang, J.; Xu, J.; Zhao, H.; Zhang, J. Journal of Materials Chemistry A 2016, 4, (47), 18284-18288.
11. Tian, F.; Radin, M. D.; Siegel, D. J. Chemistry of Materials 2014, 26, (9), 2952-2959.
12. Zhang, Y. L.; Cui, Q. H.; Zhang, X. M.; McKee, W. C.; Xu, Y.; Ling, S. G.; Li, H.; Zhong, G. M.; Yang, Y.; Peng, Z. Q. Angewandte Chemie-International Edition 2016, 55, (36), 10717-10721.