Characterization of Porous Materials 6

Staser, John

13:40

555

Analytical Modeling of PEM Fuel Cell Gas Diffusion Layers Deformation under Compression: Part 1 - Linear Behaviour Region

V. Norouzifard (School of Mechatronic Systems Engineering, Simon Fraser University) and M. Bahrami (Laboratory for Alternative Energy Conversion (LAEC), School of Mechatronic Systems Engineering, Simon Fraser University)

14:00

556

Analytical Modeling of PEM Fuel Cell Gas Diffusion Layers Deformation under Compression: Part 2 - Nonlinear Behaviour Region

V. Norouzifard (School of Mechatronic Systems Engineering, Simon Fraser University) and M. Bahrami (Laboratory for Alternative Energy Conversion (LAEC), School of Mechatronic Systems Engineering, Simon Fraser University)

14:20

557

Comparison of Porous Gas Diffusion Electrodes Obtained By Different Support Morphologies Using FIB-SEM Tomography

B. Peter (Technical University Darmstadt, department of materials engeneering), C. Kübel, T. Scherer (Karlsruhe Institute of Technology), and C. Roth (Freie Universität Berlin)

14:40

558

On the Electrochemical Deposition of Metal-Organic Frameworks

N. Campagnol (KU Leuven), T. Van Assche (Vrije Universiteit Brussel), L. Stappers (KU Leuven), J. F. M. Denayer (Vrije Universiteit Brussel), K. Binnemans, D. E. De Vos, and J. Fransaer (KU Leuven)

15:00

559

Effect of Co₃O₄ and CeO₂ Infiltration on the Activity of a LSM₁₅/GDC₁₀ Highly Porous Electrochemical Reactor

D. Ippolito and K. K. Hansen (Danish Technical University (DTU))

15:20

560

A New Water Saturation Jump Model at Gdl/MPL/CL Interfaces of a PEM Fuel Cell

L. Hao and C. Y. Wang (The Pennsylvania State University)

15:40

Break

16:00

561

Flexible Nanowire Devices Fabricated Using Template Controlled Electrodeposition of Nanowires with High Density and Aspect-Ratio

C. Xu (Department of Materials Science and Engineering, University of Florida), J. Liu (University of Florida, Department of Chemical Engineering), Y. Zhao (Department of Chemical Engineering, University of Florida), and S. Chen (University of Florida, Department of Chemical Engineering)

16:20

562

Modeling of Water Sorption and Swelling in Polymer Electrolyte Membranes

M. Safiollah, P. A. Melchy (Simon Fraser University, Department of Chemistry), and M. Eikerling (Simon Fraser University)

16:40

563

Time Resolved Study on Fabrication of Porous Alumina for Further Use to Generate Metallic Nano Catalyst

T. Hussain, A. T. Shah, A. Mujahid, Z. U. Nisa, and K. Shehzad (Institute of Chemistry, University of the Punjab, Lahore-54590, Pakistan)

17:00

564

Effects of Barrier Layer Thinning and Pore Opening on Nanowire Growth in Nanoporous Aluminum Oxide Templates

J. C. Wong, E. Bryan (Department of Chemical Engineering, University of Florida), and K. J. Ziegler (Department of Materials Science and Engineering, University of Florida, Department of Chemical Engineering, University of Florida)

17:20

565

Characterization of the Porous Transport Layer (PTL)

R. K. Phillips, S. M. Rezaei Niya, and M. Hoorfar (University of British Columbia)

17:40

566

Characterization of Micro-Porous Layer of Gas Diffusion Layer of a PEM Fuel Cell Via X-Ray Tomographic Microscopy

S. Odaya, R. Philips, A. Phillion (The University of British Columbia), and M. Hoorfar (University of British Columbia)