Lithium Battery Anode I

Monday, 25 May 2015: 08:00-12:20
Continental Room B (Hilton Chicago)
Chairs:
A. Manivannan and Donghai Wang
08:00
26
Anode Based on Porous Silicon Films Using Polymer Electrolyte for Lithium-Ion Microbatteries
V. Chaudoy, E. Luais, F. Ghamouss (Université François Rabelais), T. Defforge (Université de Tours/GREMAN/CNRS/CEA/INSA-CVL), S. Desplobain, G. Gautier, J. Wolfman (Université François Rabelais), J. C. Houdbert (STMicroelectronics), F. Tran-Van, and J. Sakai (Université François Rabelais)
08:20
27
Lithium Metal Polymer Battery Interfaces Studied By Hard X-Ray Microtomography
D. Devaux (Lawrence Berkeley National Laboratory), K. J. Harry (Lawrence Berkeley National Laboratory, University of California Berkeley), D. Y. Parkinson (Lawrence Berkeley National Laboratory), R. Yuan (Lawrence Berkeley National Laboratory, University of California Berkeley), D. T. Hallinan Jr. (Florida A&M University – Florida State University), A. A. MacDowell (Lawrence Berkeley National Laboratory), and N. P. Balsara (Lawrence Berkeley National Laboratory, University of California Berkeley)
08:40
28
Finite Element Modeling (FEM) of the Effects of Elastic Buffer Layer on the Stability of a-Si Thin Film Patterned Li-Ion Anode
S. S. Damle, S. Pal (University of Pittsburgh), P. N. Kumta (University of Pittsburgh, Pittsburgh, PA 15261), and S. Maiti (University of Pittsburgh)
09:00
29
The Effect of Surface Functionalization on the Electrochemical Lithiation of Silicon for Li Ion Batteries
H. Yildirim (Purdue University School of Chemical Engineering), M. K. Y. Chan (Argonne National Laboratory), and J. Greeley (School of Chemical Engineering, Purdue University)
09:20
30
Effect of Disorder Induced by Ball Milling on the Electrochemical Performance of Catalytically Graphitized Carbon Xerogel as Anode for Lithium Ion Batteries
K. M. Gopalakrishna, M. Kakunuri, and C. S. Sharma (Indian Institute of Technology Hyderabad)
09:40
31
Fabrication and Study of All-Solid-State Li-Ion Batteries Based on Self-Organized Titania Nanotubes
T. Djenizian (Ecole des Mines de Saint-Etienne), N. Plylahan, M. Letiche (Aix Marseille University), and M. Barr (Aix-Marseille University)
10:00
Break
10:20
32
Interpenetrated Gel Polymer Binder for High Performance Silicon Anodes in Lithium-Ion Batteries
J. Song, Z. Yu, Q. Huang, and D. Wang (The Pennsylvania State University)
10:40
33
Battery Metrics and Real-World Automotive Target Modelling
M. Karulkar (Ford Motor Company)
11:00
34
Separator Design to Suppress Dendrite Growth in Lithium-Based Batteries
A. Jana (School of Materials Engineering, Purdue University), D. R. Ely (Ivy Tech Community College), and R. E. García (School of Materials Engineering, Purdue University)
11:20
35
Magnesium Sulphide As Anode Material for Lithium-Ion Batteries
H. Maria Joseph (Helmholtz Institute Ulm (HIU)) and M. Fichtner (Karlsruhe Institute of Technology (KIT), Helmholtz Institute Ulm (HIU))
11:40
36
Sulphate Doped Polypyrrole Tin Composite for the Lithium Ion Battery Anode and Its Electrochemical Performance Evaluation
R. Ravikumar and S. Gopukumar (CSIR-Central Electrochemical Research Institute)
12:00
37
Comparative Study of the Influence of Anion Size on the Electrochemical Anion Intercalation into Graphitic Carbons
P. Meister (University of Muenster, MEET Battery Research Center), K. Beltrop, S. Rothermel, M. Winter, and T. Placke (MEET Battery Research Center, University of Muenster)
See more of: A01: Joint General Session: Batteries and Energy Storage -and- Fuel Cells, Electrolytes, and Energy Conversion
See more of: Batteries and Energy Storage
<< Previous Session | Next Session >>