Z01 - General Student Poster Session

Tuesday, 11 October 2022: 18:00-20:00
Cationic MOF-Based Cu/Mo Bimetal Doped Multifunctional Carbon Nanofibers As Efficient Catalyst for High Sulfur Loading Lithium-Sulfur Batteries
H. Pan and M. Wubbenhorst (KU Leuven)
Nano-Architectural Design of V2O5 for High-Performance Lithium-Ion Battery Cathode
K. Sim (Gwangju Institutue of Science and Technology) and K. Eom (Gwangju Institute of Science and Technology)
Mechanism of Improved Lithium-Sulfur Battery Performance By Oxidation Treatment to Microporous Carbon As Sulfur Matrix
L. Yoshida (Kansai University), Y. Orikasa (Ritsumeikan University), and M. Ishikawa (Kansai University)
Antimony Nanobelt Asymmetric Membranes for High Capacity Sodium Ion Battery Anodes
J. DiCesare, J. Wu, L. Williams, and O. Sheppard (Georgia Southern University)
A Strategy to Suppress the Electrochemo-Mechanical Degradation in Solvent-Free Electrodes for All-Solid-State Batteries
J. J. Lee, C. Bak, D. Kim, and Y. M. Lee (DGIST)
Measurement and Analysis of Mechanical Properties of All-Solid-State Electrodes Fabricated By Dry Process with Saicas
C. Bak (Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu Gyeongbuk Institute of Science and Technology), J. J. Lee (Daegu Gyeongbuk Institute of Science and Technology), D. Kim (DGIST), and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)
Safety-Enhanced Polyethylene Separator with Thermally Conductive Ultra-Thin Ceramic Coating Layer for Advanced Libs
U. Kim, Y. Roh, and Y. M. Lee (DGIST)
A Fluorine-Based Linear Carbonate Electrolyte Additive for Enhanced High-Voltage Cycle Performance of Li-Metal Secondary Batteries
J. Han, D. Jin, C. Park, S. Lee (DGIST), and Y. M. Lee (Daegu Gyeongbuk Institute of Science and Technology)
A Flame-Retardant Polymer Electrolyte for Safe and Long-Life Lithium Metal Battery
H. J. Cheon and M. Chang (Chonnam National University)
The Practice of Rational Designs of Electrolyte Additives for Lithium Batteries
J. Shi (Argonne National Laboratory, University of California Riverside), J. Zhang (University of California Riverside), R. Amine (Argonne National Laboratory), J. Guo (University of California Riverside), C. C. Su, and K. Amine (Argonne National Laboratory)
Synthesis, Structural and Electrochemical Properties of Sodium Transition Metal Fluorosulfate Cathodes for Na-Ion Batteries
V. Ahuja (Jawaharlal Nehru Centre for Advanced Scientific Research), B. Senthilkumar (JNCASR), and P. Senguttuvan (Jawaharlal Nehru Centre for Advanced Scientific Research)
“Water-in-Salt” and Nasicon Electrolyte-Based Na-CO2 Battery
E. Im (Ulsan National institute of science and technology, Korea institute of industrial technology), K. Baek, J. Park (Ulsan National institute of science and technology), H. Seo (Korea institute of industrial technology), S. J. Kang (Ulsan National institute of science and technology), and G. D. Moon (Korea institute of industrial technology)
Solvent Dependent Spectroscopic and Electrochemical Studies of Nickel (II) Diethyldithiocarbamate
R. Islam and B. H. Farnum (Auburn University)
Novel 3D Bismuth Vanadate (BiVO4) Spheres As an Effective Bifunctional Electrocatalyst for Lithium–Oxygen Batteries
N. A. R. Che Mohamad, K. Chae, F. Marques Mota, and D. H. Kim (Ewha Womans University)
Disentangling Plasmonic and Catalytic Effects in a Practical Plasmon-Enhanced Lithium–Oxygen Battery
K. Chae (Ewha Womans University), M. Kim (Ewha Womens University), F. Marques Mota, N. A. R. Che Mohamad, and D. H. Kim (Ewha Womans University)
Improvement of Sulfur Cathode Reversibility By Specific Chemical Lithium Pre-Doping Method
K. Masato, M. Okuno, D. Okuda, and M. Ishikawa (Kansai University)
Cobalt-Embedded 3D Conductive Honeycomb Architecture to Enable High-Sulfur-Loading Li-S Batteries Under Lean Electrolyte Condition
H. Pan (KU Leuven)
Ceramic Nanowire Coated Membrane As Thermally Stable Battery Separator
B. Wang, W. Fu, F. Wang, and G. Yushin (Georgia Institute of Technology)
A Simple Lif-Coating Method for Lithium and Manganese-Excess Layered Oxides to Improve the Cycle Life of Lithium-Ion Batteries
J. Lee (KAIST), T. Kim, H. Kang, G. Hwang, G. Shin, J. H. Moon (Korea Advanced Institute of Science and Technology), and E. Cho (Korea Advanced Institute of Science and Technology (KAIST))
Improving the Electrochemical Performance of Lithium-Excess Layered Oxide Cathode By Solution-Based Precursor Coating
G. Hwang, J. H. Moon, T. Kim, H. Kang (Korea Advanced Institute of Science and Technology), J. Lee (KAIST), E. Cho (Korea Advanced Institute of Science and Technology (KAIST)), and G. Shin (Korea Advanced Institute of Science and Technology)
Suppressing Li-Dendrite By the Structural Design of Li-Si Alloy-Anode in Sulfide Based All-Solid-State Batteries
M. Kim and H. T. Lim (Changwon National University)
The Effect of Surface-Abundant Hydrogen Bonding on the Electrolyte Reduction for the Stable SEI in Lithium Metal Batteries
S. Kim and K. Eom (Gwangju Institute of Science and Technology)
Development of a Three-Dimensional Porous Scaffold Adopting Lithiophilic Silver for a High-Performance Lithium Metal Anode
J. Jo (GIST) and K. Eom (Gwangju Institute of Science and Technology)
Study of Increase in Na Stoichiometry of NaxMn1-XO2 (X=1.05-1.3) Na-Rich Cathode Material for High Capacity and Superior Stability
B. K. Ganesan (CHONNAM NTNL UNIVERSITY), U. Son (Chonnam University), M. Moorthy (CHONNAM NATIONAL UNIVERSITY), J. G. Ryu, Y. A. Kim (Chonnam University), and Y. S. Lee (Chonnam National University)
PVDF-HFP Based Composite Solid Electrolyte for High Voltage NCM811 Solid-State Li-Metal Battery (SSLMB)
J. G. Ryu, Y. A. Kim (Chonnam University), M. Moorthy (CHONNAM NATIONAL UNIVERSITY), U. Son, S. Lee (Chonnam university), and Y. S. Lee (Chonnam National University)
Visualizing Reaction Distributions for Materials Validation and Failure Analysis in Li-Ion Batteries
M. Tang and K. Negrete (Drexel University)
A Robust Cathode Structure for Eco-Friendly Li-Ion Battery: NMC Coated Li-Rich LMO Cathode
A. Ahuja, A. Kumar, A. Sengupta, M. Gautam, H. Lohani, P. Kumari, and S. Mitra (Indian Institute of Technology Bombay)
Data-Driven State of Health (SOH) Prediction for Lithium-Ion Batteries
K. O'Boyle, J. Park, and D. Ajiboye (Missouri University of Science and Technology)
Thin-Separator for Low-Melting Point Thermal Battery Electrolytes
A. Baggett, C. E. Alvarez Pugliese (Texas Tech University), and G. G. Botte (Texas Tech University, Chemical and Electrochemical Technology and Innovation Laboratory)
Effect of Synthesis Routes on Local Structure and Electrochemical Performance in Mn-Ti Based Disordered Rocksalt Cathodes for Lithium-Ion Batteries
S. M. Patil (University of Tennessee Knoxville, Oak Ridge National Laboratory), B. Jiang, R. D. McAuliffe, E. Self (Oak Ridge National Laboratory), K. Page (University of Tennessee Knoxville), and J. Nanda (Oak Ridge National Laboratory)
Nonprecious Multi-Principal Metal Systems As the Air Electrode for a Solid-State Rechargeable Zinc-Air Battery
C. Madan and A. Halder (Indian Institute of Technology Mandi)
Alloy Anodes for Nonaqueous Calcium-Ion Batteries
V. Briselli, Z. Yang, S. Cora (University of Massachusetts Boston), and N. Sa (Argonne National Laboratory)
Influence of the Molar Ratio of Co and V in Bimetallic Oxides on Their Pseudocapacitive Properties
L. Quispe Garrido, I. Monje (Universidad Nacional de Ingeniería), E. O. López (Centro Brasileiro de pesquisas físicas, Río de Janeiro, Brasil), J. M. Gonçalves (Universidade de Sao Paulo, Sao Paulo, Brasil), J. G. Ruiz Montoya (Universidad Nacional de Ingeniería), G. Planes (Universidad Nacional de Río Cuarto, Córdoba, Argentina), and A. Baena Moncada (Universidad Nacional de Ingeniería)
Seawater Battery: Strategies to Enable High Performance
A. Claus, A. Berkova, O. Awadallah, and B. El-Zahab (Florida International University)
The Effects of Time, Pressure, Temperature, and the Cell Ideal Time on Direct Contact Prelithiation of Si-C Anode
M. Gautam, G. K. Mishra, A. Ahuja, S. Sau (Indian Institute of Technology Bombay), M. Furquan (IIT Bombay), and S. Mitra (Indian Institute of Technology Bombay)
Nano-Crystallites of P2-Type Layered Transition Metal Oxide High Voltage Cathode for Sodium-Ion Battery
A. Sengupta, A. Kumar, A. Ahuja, G. Barik, H. Lohani, P. Kumari, and S. Mitra (Indian Institute of Technology Bombay)
Energy-Efficient Synthesis of Surface-Modified LiCoO2 for Better Performance at Higher Voltage, Higher Rate through Suppression of Transition Metal Dissolution, and Li-Vacancy Ordering in the Monoclinic Phase
G. K. Mishra, M. Gautam, S. Sau, and S. Mitra (Indian Institute of Technology Bombay)
A Generic Battery Cycling Optimization Framework with Learned Sampling and Early Stopping Strategies
C. Deng and W. Lu (University of Michigan)
Applications of Soft Dendritic Colloids in Li-Ion Batteries with Advanced Structure-Derived Performance
M. J. Petrecca (North Carolina State University), J. Christopher (North Carolina State Univeristy), O. D. Velev, and P. S. Fedkiw (North Carolina State University)
Critical Barriers to Successful Implementation of Mn-Rich Cathodes: A Study of Low SOC Impedance
J. Chen (Argonne National Laboratory, Worcester Polytechnic Institute), A. Gutierrez (Argonne National Laboratory), M. T. Saray, R. Shahbazian-Yassar (University of Illinois at Chicago), M. Balasubramanian (Argonne National Laboratory), Y. Wang (Worcester Polytechnic Institute), and J. R. Croy (Argonne National Laboratory)
Studies of Synthesis Temperature Effects on Cubic Lithated-Spinel to Layered Phase Transformation and Electrochemical Performance of LiMn0.5Ni0.5O2 Cathode Materials
B. Shi (Argonne National Laboratory, Department of Chemical Engineering, University of Rochester), J. Gim (Argonne National Laboratory), L. Li, C. Wang (Pacific Northwest National Laboratory), A. Vu, J. R. Croy, M. Thackeray, and E. Lee (Argonne National Laboratory)
The Developing Understanding of Li Dendrite Suppression in Solid Electrolyte Batteries
X. He, H. Wan, and C. Wang (University of Maryland, College Park)
A Novel, Membrane Free Redox Battery Design Using Organic/Inorganic Redox Pair in Aqueous System
O. H. Nguyen, P. Iyapazham Vaigunda Suba, M. Shoaib, and V. Thangadurai (University of Calgary)
Title: Static Cell and Porous Electrode Model for Cycling Behavior of Aqueous Organic Redox Active Materials
J. D. Sosa and M. Aziz (Harvard University)
Synthesis of Fluorescent Carbon Nanoparticles (CNPs) By Microwave-Assisted Polymerization of Sp-Carbon Rich Precursors
V. K. Jayswal (Département de Chimie, Université Laval, Centre de Recherche des Matériaux Avancés (CERMA), Université Laval), A. M. Ritcey (Centre de Recherche des Matériaux Avancés (CERMA), Université Laval, Département de Chimie, Université Laval), and J. F. Morin (Département de Chimie, Université Laval, Centre de Recherche des Matériaux Avancés (CERMA), Université Laval)
Preparation and Characterization of Carbon Nanotubes Enhanced Canola Protein Isolate (CNT/CPI) Bio-Adhesive for Wood Application
E. M. Enemuo (university of witwatersrand)
Elucidation of the Corrosion Inhibition Mechanism of Nitrogen-Based Inhibitors and Fabrication of a Flow-Cell Type Microelectrochemical System
S. Amatsuka, I. Muto, M. Nishimoto, and Y. Sugawara (Department of Materials Science, Tohoku University)
The Effect of Phosphorus on the Mechanism of Pitting Initiation in Carbon Steel
R. Takayama, I. Muto, M. Nishimoto (Department of Materials Science, Tohoku University), H. Sato (Steel Research Laboratories, Nippon Steel Corporation), and Y. Sugawara (Department of Materials Science, Tohoku University)
Design Studies Using Corrosive and Non-Corrosive Materials to Improve on Reliability and Efficiency of an Impeller of a Centrifugal Pump
M. N. Idris Sr. (University of Maiduguri)
Evaluation of Two Methods of Bias Correction of Precipitations on Improvement of Hydrological Simulation:Case of Chiffa Basin-Northern Algeria-
M. A. Zoubida (National Agronomic Institute of Tunisia)
A Scalable Method for Improving Zn Crystallinity for Low-Gassing Alkaline Batteries
B. Lenhart, S. A. Lateef (University of South Carolina), M. Zuraw (Duracell), and W. E. Mustain (University of South Carolina)
Corrosion Properties of Ni-P-B Dispersion Coating for Industrial Knives and Blades
N. A. B. Omar (Hochschule Mittweida, Technische Universität Ilmenau), F. Koester, F. Hahn (Hochschule Mittweida), and A. Bund (TU Ilmenau)
Temperature-Dependent Molten Chloride Salt Corrosion of Nickel Alloys
S. Brankovic, P. M. Singh, and D. Ranjan (Georgia Institute of Technology)
Design of Anti-Fouling Membrane Coatings for Desalination
B. Truong and M. Freire-Gormaly (York University)
Low Shear Force Defect Removal from SiC Using Megasonic Enhanced Cleaning
M. M. Miliauskas and J. J. Keleher (Lewis University)
Development of Slurry Formulations for Molybdenum-Chemical Mechanical Planarization (Mo-CMP)
A. L. Dudek and J. J. Keleher (Lewis University)
Development of Responsive Polymeric Nanocomposites for Enhanced CeO2 Removal in Post-Chemical Mechanical Planarization (p-CMP)
K. Wu, A. T. Caridi, R. J. Gentile, J. L. Powell, and J. J. Keleher (Lewis University)
Development of “Tunable” Gallium Nitride (GaN) Chemical Mechanical Planarization (CMP) Slurry Formulations
K. A. Cahue and J. J. Keleher (Lewis University)
Crmnv and Crmntiv Heas Elastic Properties for Use in Beam Exit Windows for MW Irradiation Facilities
Y. Mohammed (Old Dominion University), N. Curtis (U of Wisconsin-Madison, Eng. Physics, Madison, Wisconsin 53706), M. Moorehead (Idaho National Laboratory, Idaho Falls, Idaho), J. L. Hash (U Wisconsin-Madison, Eng. Physics, Madison, WI 53706), A. Couet (U. Wisconsin-Madison, Eng. Physics, Madison, WI 53706), J. Vennekate, G. Ciovati (Thomas Jefferson National Lab, Newport News, Virginia 23606), H. Baumgart (Electrical Eng. Dept., Old Dominion University, Norfolk, VA), and A. Elmustafa (Old Dominion University, Mechanical & Aerospace Eng., Norfolk, VA)
Microstructure and Mechanical Properties of Rexnbmotaw Thin Films Prepared By RF Magnetron Sputtering
I. Al Keyyam (Old Dominion University, Mechanical & Aerospace Eng., Norfolk, VA), Y. S. Mohamed (Old Dominion University, Mechanical & Aerospace Eng. Norfolk, VA), H. Baumgart (Electrical Eng. Dept., Old Dominion University, Norfolk, VA), N. Ghariban (Virgina State University, Engineering, Petersburg, VA), and A. Elmustafa (Old Dominion University)
Magnetron Sputtering Deposition of Lead-Free (SAC) Thin-Film Alloys and Mechanical Characterization Using Nanoindentation
M. Ojha (Old Dominion University, Mechanical & Aerospace Eng., Norfolk, VA), Y. S. Mohamed (Old Dominion University, Mechanical & Aerospace Eng. Norfolk, VA), H. Baumgart (Electrical Eng. Dept., Old Dominion University, Norfolk, VA), and A. Elmustafa (Old Dominion University)
Optimization of Pulsed Polarization Condition for Efficient Electrochemical CO2 Reduction
K. Kouchi (Chemical Science and Engineering, Hokkaido University) and K. Azumi (Hokkaido University)
The Oxidation Behavior of Model Molecules for Electrolysis of Polymer Materials
H. Kazuma, T. Maruyama, and T. Saida (Meijo University)
Tuning of Morphological, Crystallographic and Optoelectronic Properties in Electrodeposition of Cu­SCN for Device Applications
K. Uda, Y. Harada, T. Nakamura (Yamagata University), Y. Tsuda (National Institute of Advanced Industrial Science and Technology), L. Sun, Y. Suzuri, and T. Yoshida (Yamagata University)
Electropolymerization of Neutral Red
D. Kono, Y. Harada, D. Xinjie, and T. Yoshida (Yamagata University)
The Development of Paper-Based Electrodes to Detect Glucose
M. Begay, K. Wilson, J. Charley, J. Platero, M. Nelwood, S. Francis (Navajo Technical University), A. Mhatre, A. M. Varman (Arizona State University), and T. Soundappan (Navajo Technical University)
Investigating Gate Interface Traps in β-Ga2O3 Field Effect Transistors (MOSFETs) By Using the Transfer Length Method (TLM) and UV Exposure
O. Maimon (George Mason University, National Institute of Standards and Technology), N. Moser, K. Liddy, A. Green, K. Chabak (Air Force Research Laboratory), C. Richter (NIST), K. Cheung, S. Pookpanratana (National Institute of Standards and Technology), and Q. Li (George Mason University, National Institute of Standards and Technology)
Cryptology Based on Laplace Transform of Hyperbolic Function and Matrix Decomposition Method
Z. Akram (University of Agriculture Faisalabad)
Internal Friction and Mechanical Spectroscopy of SiO2/Si, Nanocomposites of Multiwalled Carbon Nanotubes and Polyamide, Polyethylene, Polyvinyl Chloride, Extended Polystyrene
Y. A. Onanko, D. V. Charnyi, A. P. Onanko, E. M. Matselyuk, O. P. Dmytrenko, M. P. Kulish, T. M. Pinchuk-Rugal, and P. P. Ilyin (Kyiv national university)
Rapid Joule Heating Method Applied to Solid State Electrolyte Materials
L. L. Berz (Georgia Institute of Technology), A. S. Westover (Oak Ridge National Laboratory), N. Liu (Georgia Institute of Technology), and R. L. Sacci (Oak Ridge National Laboratory)
Electrodeposition of Rhenium Sandwich Structures and the Superconducting Transition Behavior
K. Ahammed and Q. Huang (University of Alabama)
Systematic Study of Process Impact on Fin Top Damage through Uniform Design Method in Replacement Metal Gate Technology
L. Yin, J. Si, X. Ke, Z. Wang, E. Chong, and H. Zhang (Semiconductor Manufacturing International Corporation)
Mixed Metal Cathodes for CO2 Electroreduction Using Solid Oxide Electrodes
V. Kamboj (Department of Inorganic and Physical Chemistry, IISc, INDIA) and C. Ranjan (Indian Institute of Science)
Transition Metal Doped-Chalcogenide Based Electrocatalysts for Oxygen Evolution Reaction
W. Y. An, S. R. Choi, and J. Y. Park (Sejong University)
Mitigation of Performance Degradation of Cathodes for Polymer Electrolyte Membrane Fuel Cells
J. Y. Park, S. Y. Choi, and S. R. Choi (Sejong University)
Mixed Metal Oxides for Oxygen Reduction Reaction: Strategies for Suppressing H2O2 Formation
S. K. Biswal (Indian Institute of Science (India)) and C. Ranjan (Indian Institute of Science)
Insights into the Effect of Pb on Formic Acid Electro-Oxidation on Pt
V. Veenu, D. Roychowdhury, and C. Ranjan (Indian Institute of Science)
Modifying the Cathode Catalyst Layer in PEM Fuel Cells with Ionic Liquids for Improved Oxygen Reduction Reaction
R. Gawas, M. Tang, and J. D. Snyder (Drexel University)
Operando X-Ray Fluorescence Measurement Method of Cerium Radical Quencher Distribution in through-Plane MEA
A. Takezawa (Ritsumeikan University), Y. Orikasa (Ritsumeikan university), Y. Tsuji, T. Asaoka, M. Ohki (FC-Cubic TRA), O. Sekizawa (Tokyo University of Science), and K. Nitta (Japan Synchrotron Radiation Research Institute)
Pentlandite Catalysts for the Electrochemical Hydrogenation of Alkynols in a Zero-Gap Electrolyzer
K. Pellumbi, L. Wickert (Ruhr University Bochum, Fraunhofer UMSICHT), J. T. Kleinhaus (Ruhr University Bochum), J. Wolf (Ruhr University Bochum, Fraunhofer UMSICHT), K. junge Puring (Fraunhofer UMSICHT), D. Siegmund, and U. P. Apfel (Ruhr University Bochum, Fraunhofer UMSICHT)
ORR Activities on Hydrophobic Phosphonium Ionic Liquid Modified Pt/C Catalysts
U. Ando, T. Okada, M. Matsumoto (National Institute of Technology, Nara College), Y. Inoue (Technology Research Institute of Osaka Prefecture), K. Katakura (National Institute of Technology, Nara College), K. Tsunashima (National Institute of Technology, Wakayama College), and H. Yamada (National Institute of Technology, Nara College)
Cu-Bx (X: N, CN, P) Composites for CO2 Electroreduction: Materials Vs. Gas Diffusion Electrode Characteristics
K. Pellumbi (Fraunhofer UMSICHT, Ruhr University Bochum), M. Smialkowski (Ruhr University Bochum), D. Siegmund, K. junge Puring (Fraunhofer UMSICHT), and U. P. Apfel (Ruhr University Bochum)
Selective Removal of Isolated Ni of the Electroplated Ni-P Catalyst for High-Performance Hydrogen Evolution Reaction
S. Jo and K. Eom (Gwangju Institute of Science and Technology)
Analyzing the Soret Coefficient Using Time Resolved Fourier Transform Infrared Spectroscopy (FTIR)
A. A. David, D. Hallinan, and M. Silverman (Florida State University)
3D Printing and Injection Molding of Polymer Composites for Fuel Cell Bipolar Plates
Z. E. Vandervort, M. W. Myers, B. A. Young, and A. S. Hollinger (Penn State Behrend)
A Mechanistic Approach to Enhance and Better Understand the Carbon Dioxide Reduction Reaction
J. Weiss, Y. He, and P. Zelenay (Los Alamos National Laboratory)
Integrated Method of Pretreatment, Saccharification and Electro-Fermentation of Saccharum Spontaneum to Produce Bioethanol Using Microbial Consortium
P. Dhungana and J. Rajbhandari (Tribhuvan University)
Biomimetic Adsorptive Composites for Redox Remediation of Organic Pollutants
C. J. Shanahan and J. J. Keleher (Lewis University)
Exploring the Efficacy of Conductive Biomimetic Nanocomposite Materials As Sensor for Wound Healing Applications
A. K. Sran and J. J. Keleher (Lewis University)
Insights into the Electrochemical Hydrogenation of Phenol
B. Markunas and J. D. Snyder (Drexel University)
Reaction Pathways for the Electrochemical Synthesis of KA Oil from Cyclohexane
T. Siboonruang and M. Tang (Drexel University)
Electrochemical Characterization inNeutral Electrolyte of Mixed Metal Oxide
J. Morales, J. J. Collazos Reina, K. S. Gómez Lara, and J. H. Herrera (Universidad Santiago de Cali)
A Mechanistic Investigation of Electrochemical Ozone Production Using Nickel and Antimony Doped Tin Oxide in Non-Aqueous Electrolytes
R. Alaufey and M. H. Tang (Drexel University)
Electrochemical and DFT Studies for Fentanyl and Fentanyl Analogs
L. Wang (Florida International University), G. M. Alves (Universidade de São Paulo), S. Dogruer, and B. McCord (Florida International University)
The Significance of Organometallic Complexes in the Photochemical Reduction of Cu2+ Onto Semiconductor Scaffolds
C. E. Rogers III, K. M. Sheets, and J. J. Keleher (Lewis University)
Nitrogen-Doped and Phosphorus-Doped Carbon Fiber Ultramicroelectrodes As Electrochemical Sensors for Detection of Hydrogen Peroxide
E. Peprah-Yamoah and G. W. Bishop (East Tennessee State University)
Electrochemical Analysis of Oxygen Reduction in Phosphonium Ionic Liquids Based on Rotating Ring-Disk Electrode Method
Y. Oi, T. Okada, M. Matsumoto, K. Katakura (National Institute of Technology, Nara College), Y. Inoue (Technology Research Institute of Osaka Prefecture), K. Tsunashima (National Institute of Technology, Wakayama College), and H. Yamada (National Institute of Technology, Nara College)
An Electrochemical Immunoassay System for Measuring Circulating Protein Biomarkers of Pediatric Soft Tissue Sarcoma
M. K. D. Addo (East Tennessee State University), I. Antwi (University of Health Science Center, East Tennessee State University), and G. Bishop (East Tennessee State University)
Stabilization of Urea in Urine through the Electrochemical Generation of Hydrogen Peroxide
P. Arve (Clemson University)
UV-vis Spectroelectrochemical In situ Study During the Electrochemical Oxidation of 2-Thiazolamine and 2-Oxazolamine
J. Morales, K. S. Gómez Lara, J. H. H. H. H. Herrera, and J. J. Collazos Reina (Universidad Santiago de Cali)
Transition Metal Substituted Barium Hexaferrite-Modified Electrode: Application as Electrochemical Sensor of Acetaminophen
J. Morales, C. P. Granja, and D. G. S. C. Silgado Cortazar (Universidad Santiago de Cali)
Synthesis of Substituted Barium Ferrites and Hexaferrites and Their Electrochemical Characterization
J. Morales, K. S. Gómez Lara, J. J. Collazos Reina, and J. H. H. H. H. Herrera (Universidad Santiago de Cali)
Interference of Graphene Presence in Formation Mechanism of Metalloporphyrin (PtTFPP) Complex with Oxygen
M. E. M. Duque (Instituto Tecnológico de Aeronáutica - ITA) and E. S. Gonçalves (Instituto Tecnológico de Aeronáutica)
Phosphonium Salts As Potential Guest Substances for Ionic Semiclathrate Hydrates
S. Azuma, K. Tsunashima (National Institute of Technology, Wakayama College), J. Shimada, T. Sugahara (Osaka University), and A. Tani (Kobe University)
Understanding the Electrochemical Interactions of Coronavirus
A. Ramanujam and G. G. Botte (Texas Tech University)
Design, Flow Simulation and Experimental Test of Micro/Milibioreactor with Pillar Structures for Bubble Control and Cell Growth
N. Bourguignon (Florida International University), E. Bravo (University of Michigan), D. Chamorro (IREN Center, National Technological University, Argentina), A. Aravelli (Florida International University), M. Perez (Florida International University, IREN Center, National Technological University, Argentina), B. Lerner, and S. Bhansali (Florida International University)
Controlled Nanoporous Structures of Ultrathin π-Conjugated Polymer Films for Highly Sensitive Gas Sensors
E. Wi (Chonnam National University), V. V. Tran (Gachon University), and M. Chang (Chonnam National University)
Development of a Piezoresistive Pressure Sensor Using an in-House Pulsewave Simulator to Ensure Detection of Full Pulse Waveform on Diverse Populations
B. Jafarizadeh, A. Chowdhury, N. Pala, and C. Wang (Florida International University)
Sacrificial Template Method to Fabricate Highly Sensitive Porous Capacitive Pressure Sensor for Full Pulse Waveform Detection
A. Chowdhury, B. Jafarizadeh, N. Pala, and C. Wang (Florida International University)
Design and Fabrication of Flexible Paper-Based, Electrochemical Sensors to Detect the Presence of Heavy Metals in Ground Water
J. Platero, T. Soundappan (Navajo Technical University), K. Abdelazim (Harvard University), M. Nelwood, S. Francis, K. Wilson, M. Begay, and J. Charley (Navajo Technical University)
Fabrication of Low-Cost, Paper-Based Electrodes for Detection of Bisphenol Compounds
M. Nelwood, J. Platero (Navajo Technical University), R. Tom (Harvard University), K. Wilson, J. Charley, M. Begay (Navajo Technical University), K. Abdelazim (Harvard University), A. M. Varman (Arizona State University), and T. Soundappan (Navajo Technical University)
Video-Based Time-Series Feature Extraction Image Encoding Methods for Enhanced Colorimetric Gas Concentration Estimation
C. KIM, J. Lee, J. Park (Korea Institute of Industrial Technology), D. Jung (Korea Institute of Industrial Technology (KITECH)), C. W. Nam (Korea Institute of Industrial Technology), S. Choi (Kyungpook National University), and S. Lee (Korea Institute of Industrial Technology (KITECH))
See more of: Z01: General Student Poster Session
See more of: General Topics
<< Previous Session | Next Session >>