A04 Poster Session

Sharma, Neeraj

284

LiNi_0.8Mn_0.1Co_0.₁O₂ Cathode Materials with High Physicochemical Stability By Addition of Binding Oxides (Cancelled)

285

Flexible High Performance Lithium Ion Battery Electrode Based on Free-Standing TiO2 Nanocrystals/Carbon Cloth Composite

R. Tjandra, G. Li (University of Waterloo), X. Wang (Concordia University), J. Yan, M. Li, and A. Yu (University of Waterloo)

286

Synthesis of Li₄Ti₅O₁₂ Microspheres and Their Electrochemical Performance As Anode Materials for Li-Ion Batteries

I. S. Park, H. J. Hong, J. Kim, and T. Ryu (Korea Institute of Geoscience and Mineral Resources)

287

Single Electrode Entropy Change for LiCoO₂ Electrodes

F. Richter, A. Gunnarshaug, O. S. Burheim (Norwegian University of Science and Technology), P. J. S. Vie (Institute for Energy Technology), and S. Kjelstrup (Norwegian University of Science and Technology)

288

In-Operando EDXRD of Graphite and Silicon-Graphite Electrodes in Lithium-Ion Cells

K. P. C. Yao (Argonne National Laboratory), K. Kalaga (Argonne National Lab), J. Okasinski, J. Almer (Argonne National Laboratory), and D. P. Abraham (Argonne National Lab)

289

An Orthogonal Investigation in Structures and Performances of Vanadium Modified Li₂FeSiO₄

X. Wei, X. Luo, H. Chen, X. Cheng, L. Huang, and Y. Zhang (Xiamen University)

290

Simulation of Optimization and Utilization for LiB with Multi-Element Network

K. Lin (Kyoto University), G. Inoue (Kyushu University), and M. Kawase (Kyoto University)

291

Graphene and Disulfide-Based Framework As a Transition Metal-Free Electrode Material for Li-Ion Battery (Cancelled)

292

Enhanced Electrochemical Performance of the Cathode for a Lithium Ion Secondary Battery Using Lithium Ion Conductive Glass-Ceramics

T. Katoh (OHARA INC.), R. Satoh (OHARA Inc.), K. Nakajima (OHARA INC.), and B. Hoffman (OHARA CORPORATION)

293

Anodes for Lithium Ion Batteries Produced from Recovered Silicon Powders

T. Mokkelbost (SINTEF Materials and Chemistry), N. P. Wagner (SINTEF Industry), E. Sheridan (SINTEF Materials and Chemistry), J. R. Tolchard (SINTEF Industry), G. Noja (Garbo S.r.l.), and M. Bellmann (SINTEF Materials and Chemistry)

294

Si Nanoparticles-Embedded Nitrogen-Doped Carbon Nanofibers for Lithium Ion Battery Anodes

S. W. Park, H. W. Shim (Korea university), J. C. Kim (Korea University), S. D. Seo (Korea university), G. H. Lee, and D. W. Kim (Korea University)

295

High Safety Electrode Additive for Preventing Internal Short Circuit Problem in Lithium Ion Battery

N. H. Yeh and F. M. Wang (National Taiwan University of Science and Technology)

296

Numerical Study of Striped Diffusion during Lithiation of Tin Oxide Anodes

A. Ramasubramanian, V. Yurkiv (University of Illinois at Chicago), A. Najafi (ANSYS. Inc), A. Nie (Shanghai University), A. Khounsary (Illinois Insitute of Technology), R. Shahbazian-Yassar, and F. Mashayek (University of Illinois at Chicago)

297

Analysis of Charge / Discharge Behavior Using Simple and High-Precision Capacity Measurement: Application to Commercially Available Large-Format Lithium-Ion Batteries

A. Yamazaki (Central Research Institute of electric Power Industry), Y. Kobayashi, Y. Mita, and H. Miyashiro (Central Research Institute of Electric Power Industry)

298

Surface Modification of 0.5Li₂MnO₃·0.5LiMn_0.5Ni_0.5O₂with SnO₂ Cathode Material for Lithium Ion Batteries (Cancelled)

299

Effect of NaCl Impurity in TiO2 on Li4Ti5O12 Formation (Cancelled)

300

Carbon-Coated Silicon Powders Prepared from Recycled Silicon Ingot Slicing Slurries and Biomass for Negative Electrode Materials of Li-Ion Batteries (Cancelled)

301

Investigation of Polyanion Materials with Multiple Intercalation Cations: Na Ions in Na-Ion Full Cell

E. Paharik, K. Rudman, and G. Koenig (University of Virginia)

302

Ionically Enhanced Si_xFe_y/Li_1.3Al_0.3Ti_1.7(PO₄)₃ Nanocomposite for High Performance Lithium-Ion Batteries

J. S. Cho (Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University), A. R. Letfullina (Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro), P. K. Alaboina, M. J. Uddin (Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University), and S. J. Cho (North Carolina A&T State University, Joint School of Nanoscience and Nanoengineering)

303

Direct Visualization of Li Dendrite Growth Process at Short-Circuit Condition Via Transmission X-Ray Microscopy

J. H. Park, A. Raj, and D. A. Steingart (MAE/ACEE Princeton University)

304

Highly Engineered Si Alloy Flexible Battery

P. K. Alaboina (North Carolina A&T State University), A. R. Letfullina (University of North Carolina at Greensboro, Joint School of Nanoscience and Nanoengineering), M. J. Uddin (Joint School of Nanoscience and Nanoengineering), J. S. Cho (Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University), S. Puvvada (VF Corporation), and S. J. Cho (Joint School of Nanoscience and Nanoengineering (JSNN), North Carolina A&T State University)

305

The Effect of Tailoring Morphology of Ni-Rich Cathode Oxides on Electrochemical Stability for Lithium Ion Batteries

J. Gim, B. T. Yonemoto, H. Gao, J. Liu (Argonne National Laboratory), T. Ma (University of Rochester), G. L. Xu, K. Amine, and Z. Chen (Argonne National Laboratory)

306

Impact of Interconnections, Dynamic Conductivity, Pore Size on the Performance of V₂O₅ Cathode for Lithium Ion Batteries

N. Kim (University of Maryland, Chemistry and Biochemistry), K. Mckelvey (University of Utah), O. Rose (University of Maryland, Department of Chemistry), E. Sahadeo (Department of Chemistry, University of Maryland), C. Liu (Lam Research, University of Maryland), S. B. Lee (Chemistry and Biochemistry, University of Maryland), G. W. Rubloff (Materials Science and Engineering, University of Maryland), and H. S. White (University of Utah)

307

PEDOT/PSS-Coated Porous Silicon as anode of lithium-Ion Batteries (Cancelled)

308

Analysis of the Synergic Effects in LiFePO₄/Li₂CuO₂ Cathode Blends for Li Ion Batteries Via Electrochemical and EPR Experiments (Cancelled)

309

Prediction of Storage Ageing in a Lithium Ion Battery Using an Electrochemical Model

T. R. Ashwin (University of Warwick), A. Barai (WMG, University of Warwick), J. Chevalier, G. Chouchelamane, L. Somerville (Jaguar Land Rover), A. McGordon (University of Warwick), and J. Marco (WMG - University of Warwick)

310

Lithium Molybdenum Oxyfluorides As High-Capacity Positive Electrodes for Rechargeable Lithium Batteries

N. Takeda, S. Hoshino (Tokyo Denki University), I. Ikeuchi, R. Natsui, K. Nakura (Panasonic Corporation), and N. Yabuuchi (Tokyo Denki University)

311

Capturing Solid Solutions during a First-Order Phase Transition of Li_1+XMn₂O₄

B. Song, G. M. Veith, P. Whitfield, R. Schmidt, M. J. Kirkham, and A. Huq (Oak Ridge National Laboratory)

312

Understanding the Solution Chemistry of Coprecipitation and the Homogeneity of the Precipitated Particle to Achieve Excellent Electrochemical Performance of Transition Metal Oxide Cathode Materials for Lithium-Ion Batteries

H. Dong, G. Koenig, A. Wang, and A. Barron (University of Virginia)

313

Electrochemical Studies of Solid Electrolyte and Cathode Composite for All Solid Lithium Secondary Battery

S. H. Yang (Korea Institute of Industrial Technology(KITECH)), M. Y. Kim, D. H. Kim (Korea Institute of Industrial Technology (KITECH)), H. Y. Jung, H. J. Ban, H. M. Ryu (Korea Institute of Industrial Technology(KITECH)), and H. S. Kim (Korea Institute of Industrial Technology (KITECH))

314

Three-Dimensional Phase-Field Simulation of Mechano-Electrochemical Behavior in LiCoO₂ and Solid Electrode

Y. Suzuki, C. Tsuyuki, A. Yamanaka (Tokyo University of Agriculture and Technology), Y. Asari, and T. Iwasaki (Hitachi, Ltd.)

315

Effects of Carboxylated Polythiophenes in Fe₃O₄ Li-Ion Battery Anodes

Y. H. Kwon, K. Minnici (Georgia Institute of Technology), J. J. Park (Korea Advanced Institute of Science and Technology), M. M. Huie (Stony Brook University), S. Noda (Waseda University), S. W. Lee (Georgia Institute of Technology), K. J. Takeuchi, E. S. Takeuchi, A. C. Marschilok (Stony Brook University), and E. Reichmanis (Georgia Institute of Technology)

316

New Lithium-Excess High-Capacity Positive Electrode Materials with Reversible Three-Electron Redox Reaction of Mo³⁺/Mo⁶⁺

S. Hoshino (Tokyo Denki University), S. Ichikawa, T. Ozaki, T. Inamasu (GS Yuasa International Ltd.), and N. Yabuuchi (Tokyo Denki University)

317

Surface-Modified Li₄Ti₅O₁₂ for High Stability and Rate Performance Anode Materials (Cancelled)

318

Optimization of Crystal Structures for Cathode Materials of Li-Ion Battery Using Genetic Algorithm (Cancelled)

319

Influence of the Charge/Discharge Voltage Range on the Capacity Reversibility and Electrode/Electrolyte Interface Stability of LiCo_1/3Ni_1/3Mn_1/3O₂

A. Yano, M. Shikano (AIST), H. Kanzaki (AIST, Hitachi Maxell, Ltd.), K. Yamanaka, T. Ohta (SR Center, Ritsumeikan University), H. Kageyama, and Y. Ukyo (Kyoto University)

320

Improved High-Voltage Stability of NCM523 Cathode Using Functional Electrolyte Additive

H. Q. Pham, J. H. Kim, H. Y. Lee (Chungnam National University, Republic of Korea), E. H. Hwang, Y. G. Kwon (Leechem Co., Ltd., Republic of Korea), and S. W. Song (Chungnam National University, Republic of Korea)

321

Stabilizing High-Voltage and High-Capacity Cathode-Electrolyte Interface Using Functional Electrolyte Component

H. Y. Lee (Chungnam National University, Republic of Korea), H. Q. Pham (Chungnam National University, Republic of Korea), Y. G. Kwon, E. H. Hwang (Leechem Co., Ltd., Republic of Korea), and S. W. Song (Chungnam National University, Republic of Korea)

322

Effects of Electrolyte Additives on Unwanted Lithium Plating in Lithium Ion Cells (Cancelled)

323

Effect of Sorted Metallic and Semiconducting Single-Walled Carbon Nanotubes on LiFePO₄Cathode Material for Lithium Ion Batteries

A. A. Adepoju, T. A. Searles (Howard University), J. A. Fagan (National Institute of Standards and Technology), and Q. L. Williams (Howard University)

324

Study of the Effect of Lithium Precursor Choice on Performance of Nickel-Rich NMC

B. Fitch and M. Yakovleva (FMC Corporation, Lithium Division)

325

Flexible, Three-Dimensional Ordered Macroporous TiO₂ Electrode with Enhanced Electrode–Electrolyte Interaction in High-Power Li-Ion Batteries

G. Lui, G. Li, X. Wang, G. Jiang, E. Lin, M. Fowler, A. Yu, and Z. Chen (University of Waterloo)

326

Synthesis and Electrochemistry of High Energy LiVOPO₄ with Enhanced Electronic and Ionic Conductivity

Y. Shi, H. Zhou, F. Omenya, and M. S. Whittingham (Binghamton University)

327

Micron-sized Secondary Silicon Spherical Composite for Practical Li-ion Batteries (Cancelled)

328

Silicon Nanoparticles/Carbon Composites as Anodes for High-performance Lithium-ion Batteries

L. Xiao (University of Duisburg-Essen), Y. H. Sehlleier (University of Duisburg-Essen, IVG), S. Dobrowolny (University of Duisburg-Essen), C. Schulz, and H. Wiggers (University of Duisburg-Essen, IVG, CENIDE)

329

Entropy Profiles Decrypted: Quantifying and Understanding the Influence of Crystalline Defects through Experiment and Modelling (Cancelled)

330

Structural and Chemical Evolution of Li-Rich Li₂IrO₃during Electrochemical Cycling

L. Li (Center for Nanoscale Materials, Argonne National Laboratory), F. Castro (Department of Materials Science and Engineering, Northwestern University), J. S. Park, E. Lee (Chemical Sciences and Engineering, Argonne National Laboratory), J. W. Freeland (X-ray Science Division, Argonne National Laboratory), Z. Yao (Department of Materials Science and Engineering, Northwestern University), T. T. Fister (Chemical Sciences and Engineering Division, Argonne National Laboratory), J. Vinson, E. Shirley (National Institute of Standards and Technology), C. Wolverton, V. Dravid (Department of Materials Science and Engineering, Northwestern University), M. M. Thackeray (Chemical Sciences and Engineering Division, Argonne National Laboratory), and M. K. Y. Chan (Center for Nanoscale Materials, Argonne National Laboratory)

331

Simulation of Lithium-Ion Battery with Effect of Volume Expansion of Active Materials

G. Inoue (Kyushu University), K. Ikeshita, M. Iwabu, Y. Sagae, and M. Kawase (Kyoto University)

332

A Prognostic and Filtering Analysis Technique for Estimating Battery Remaining Useful Life (Cancelled)

333

Implementation of Tin Dioxide/Graphene/Graphene Oxide for High Capacity and Long Cycle Life Supercapacitors and As Anode Material for Lithium Ion Batteries (Cancelled)

334

Triisopropoxyboroxine (TiPBx) As an Electrolyte Additive for 18650-Type Li-Ion Batteries

H. Haruna, S. Takahashi, S. Terada (Hitachi, Ltd., Research & Developmant Group), S. Uemura, and Y. Tanaka (Shizuoka University)

335

Intrinsic Challenges in Creating a Reversible Copper(II) Fluoride Cathode for Lithium-Ion Batteries

N. Zagarella, F. Omenya, and M. S. Whittingham (Binghamton University)

336

Resistance Reduction Effect by SDX^® in Lithium-Ion Batteries

A. Takeda, T. Nakamura, H. Yokouchi, and H. Tomozawa (Showa Denko K. K.)

337

Synthesis of MnO Nano-Particle@Flourine Doped Carbon and Its Application in Hybrid Supercapacitor (Cancelled)

338

Ammonia-Treated Ordered Mesoporous Carbons with Hierarchical Porosity and Nitrogen-Doping for Lithium-Sulfur Batteries (Cancelled)

339

Clarifying Anionic Redox Chemistry in LiCoO2 By Direct Detection of O-O Bond Length and First-Principle Investigations (Cancelled)

340

Subeutectic Growth of Carbon-Coated Silicon Nanowires on Carbon Fabric As Self-Supported Electrodes for Flexible Lithium-Ion Batteries (Cancelled)

341

Non-Intercalating Phases and Electrochemical Behavior of Lithium-Ion Battery Cathode

A. Mistry and P. P. Mukherjee (Texas A&M University)

342

Effect of Using Fluorinated Ether and Sulfone as Electrolyte Solvents for Lithium Ion Batteries with Lithium-Rich Layered Cathodes and Silicon Oxide Anodes

T. Noguchi, T. Hasegawa, H. Yamauchi, I. Yamazaki, and K. Utsugi (IoT Devices Research Laboratories, NEC Corporation)

343

Energetics of Dendrite Propagation in Garnet Solid Electrolytes Using First-Principles Simulations (Cancelled)

344

Electrochemical Performance of Li_xMn_2-yFe_yO_4-zCl_z Synthesized through in Situ Glycine Nitrate Combustion

A. L. Ruth, P. C. Latorre (U.S. Army RDECOM CERDEC CP&I), E. D. Wachsman (University of Maryland), and T. B. Atwater (U.S. Army RDECOM CERDEC CP&I)

345

Lithium Dendrite Suppression By Polyethylene Oxide Film Coating on Copper Electrode Enable Lithium Metal Anode (Cancelled)

346

Understanding Morphology Evolution in Lithium Electrodeposition

D. Tewari, Z. Liu, and P. P. Mukherjee (Texas A&M University)

347

Stabilized Lithium, Manganese AB₂O₄ Spinel for Rechargeable Lithium Electrochemical Systems through A and B Site Doping

Y. J. Howarth and T. B. Atwater (U.S. Army RDECOM CERDEC CP&I)

348

eQUMEC Software: Multiscale and Multiphysics Simulation/Designing of Li-Ion Batteries

H. Hosseinzadeh (Rowan University)

349

A Survey on High Rate Performance of LiNi_0.5Mn_1.5O₄ As Cathode of Li-Ion Battery

H. Hosseinzadeh (Rowan University)

350

Strategies for Developing High-Energy Density Lithium-Ion Battery Cathodes

W. H. Kan (Energy Storage and Distributed Resources Division, LBNL) and G. Chen (Lawrence Berkeley National Laboratory)

351

ALD Al₂O₃ Coated TiO₂ Nanotube Layers As Anodes for Lithium Ion Batteries (Cancelled)

352

Synthesis and Characterization of Highly-Conducting Nanocrystallized Li(Fe_1–xMn_x)_0.88V_0.08PO₄ Cathode Materials (x = 0.25, 0.5, 0.75)

J. E. Frąckiewicz, T. K. Pietrzak, M. Wasiucionek, and J. E. Garbarczyk (Warsaw University of Technology)

353

Coupled Mechano-Electrochemical Interaction in Silicon Anode with Solid Electrolyte Interphase Layer

A. Verma and P. P. Mukherjee (Texas A&M University)

354

Exploration of Electrolytes for High Voltage Substituted Lithium Cobalt Phosphate Cathode Materia

S. A. Delp, J. L. Allen, and T. R. Jow (U.S. Army Research Laboratory)

355

Recovering Lost Capacity of Aged LiMn₂O₄ from Commercial Aqueous Battery By Direct Relithiation through Hydrothermal Treatment

H. Wang and J. Whitacre (Carnegie Mellon University)

356

Ab-Initio Study of Li-Ion Electrolyte Li₂(OH)Cl

J. D. Howard (Wake Forest University), Z. D. Hood (Georgia Institute of Technology, Oak Ridge National Laboratory), and N. A. W. Holzwarth (Wake Forest University)

357

Impact of the Surface on the Delithiation Mechanism of LiNi_0.8Co_0.15Al_0.05O₂positive Electrodes for Li-Ion Batteries

A. Grenier, H. Liu, K. M. Wiaderek, O. J. Borkiewicz, P. J. Chupas, and K. W. Chapman (Argonne National Laboratory)

358

Self-Supported Niobium Doped TiO₂ Nanotubes As a Negative Electrode for Lithium-Ion Microbatteries (Cancelled)

359

Mitigation of Failure Propagation in Multi-Cell Lithium Ion Batteries (Cancelled)

360

Solid-Electrolyte Interphase Reinforcement Strategy through Introducing Covalently Anchored Multi-Functional Components for Li-Alloy Anodes

Y. Gao and D. Wang (The Pennsylvania State University)

361

Molybdenum Substituted Vanadyl Phosphate ε‑VOPO4 for Lithium-Ion Batteries

C. Siu (NECCES at Binghamton University), K. Lee (Binghamton University), F. Omenya (NECCESS at Binghamton University), N. Chernova, M. S. Whittingham (NECCES at Binghamton University), Y. C. Lin (University of California San Diego), and S. P. Ong (University of California, San Diego)

362

Enhancement of Cycle Performance of Si/TiFeSi₂ Nanocomposite As Lithium Storage Material By Mechanical Deformation

H. I. Park, M. Sohn (Hanyang University), J. H. Choi (Korea Electrotechnology Research Institute), C. Park (Iljin electric Co. Ltd.), J. H. Kim (Kookmin University), and H. Kim (Hanyang University)

363

Synthesis of α-Mns Hierarchical Architectures By Chemical Vapor Deposition and Its Application As Anode Electrode for Li-Ion Batteries (Cancelled)

364

Sodium Titanate Nanowires As High Rate Anode Materials for Lithium-Ion Batteries

J. Liao, T. Smith, and Y. Xing (University of Missouri)

365

Oxygen Stability of Disordered, Multi-Lithium Oxide Cathodes for Li-Ion Batteries

E. C. Self, R. E. Ruther, G. M. Veith, and J. Nanda (Oak Ridge National Laboratory)

366

Li-Storage Performances of Liquid-Phase Exfoliated Two-Dimensional Gallium Sulfide Nanosheets/Single-Walled Carbon Nanotubes Composite

S. H. Park, C. Zhang (CRANN, School of Chemistry, Trinity College Dublin), O. Ronan (CRANN), A. Seral-Ascaso (Amber, Trinity College Dublin), J. N. Coleman (School of Physics and CRANN, Trinity College Dublin), and V. Nicolosi (CRANN, School of Chemistry, Trinity College Dublin)

367

Thermal and Structural Properties of Anode and Cathode Materials of Lib with Different Socs

C. Qi, Y. L. Zhu, and Q. J. Jiao (Beijing Institute of Technology)

368

High-Voltage LiNi_0.5Mn_1.5O₄ Thin Film Cathode Prepared by RF Sputtering

J. H. Kim, H. D. Kim, D. G. Yang, and H. S. Kim (Chungnam National University)

369

Conversion Mechanism of CuF2 for Secondary Batteries

J. O. Clemmons, K. J. Carroll, B. Li, and D. Strand (Wildcat Discovery Technologies)

370

Interface Instability during Ion Intercalation Process (Cancelled)

371

Analysis of Plating in Lithium-Ion Batteries with Anode Control

D. Juarez Robles, R. D. Minter (Texas A&M University), Y. Barsukov (Texas Instruments Inc.), and P. P. Mukherjee (Texas A&M University)

372

Revisiting the Electrochemical Stability of Solid Electrolytes (Cancelled)

373

Electrode Processing Towards Ultra-High-Energy-Density Electrode and Its Electrochemical Performance Research

Y. Fu, X. Song, G. Liu, and V. Battaglia (Lawrence Berkeley National Laboratory)

374

Mechanistic Properties of MgH₂–Based Anode As Derived from Structural Morphology Changes Versus Electrochemical Impedance in a Li-Ion Cell

A. El kharbachi (Institute for Energy Technology), Y. Hu (University of Oslo), M. H. Sørby (Institute for Energy Technology), P. E. Vullum (SINTEF Materials and Chemistry), J. P. Mæhlen (Institute for Energy Technology), H. Fjellvåg (University of Oslo, Dept. of Chemistry and SMN), and B. C. Hauback (Institute for Energy Technology)

375

Understanding the Evolution of Cathode Material in Electrochemical Process at Multi-Scale (Cancelled)

376

First Principles Calculations of Interfacial Models for Nucleation Processes during NiO Conversion Reactions

R. Warburton, H. Yildirim (Purdue University), T. T. Fister (Argonne National Laboratory), G. Evmenenko (Northwestern University), M. K. Y. Chan, P. Fenter (Argonne National Laboratory), M. J. Bedzyk (Northwestern University), and J. Greeley (Purdue University)

377

Thermodynamic Investigation of Selected Compositions in the LiNiO₂-LiMnO₂-LiCoO₂ System As Lithium Ion Battery Cathode Materials (Cancelled)

378

A Detailed-Electrochemistry Model of an LiFePO₄/Graphite Lithium-Ion Cell Capturing Abuse and Aging Phenomena

C. Kupper, S. Rißmann, and W. G. Bessler (Offenburg University of Applied Sciences, Germany)

379

Oxysulfide Lialso: A Lithium Superionic Conductor from First Principles

X. WANG, R. Xiao, H. Li, and L. Chen (Institute of Physics, Chinese Academy of Sciences)

380

Mechanisms of Degradation and Necessity of ALD Coatings for High Voltage NMC532, NMC622, and NMC811 Li-Ion Cells (Cancelled)

381

Cycling Porous Silicon with Lithium Iron Phosphate for High Performance Li-Ion Batteries (Cancelled)

382

Structural Evolution of Spinel Phases in ‘Layered-Layered-Spinel’ Composite Cathodes

E. Lee (Chemical Sciences and Engineering), Y. Ren (Advanced Photon Source, Argonne National Laboratory), D. Ahn (Beamline Department, Pohang Accelerator Laboratory, Advanced Photon Source, Argonne National Laboratory), J. S. Park (Chemical Sciences and Engineering), D. Mohanty, A. Huq (Spallation Neutron Source, Oak Ridge National Laboratory), J. R. Croy (Argonne National Laboratory), and M. M. Thackeray (Chemical Sciences and Engineering Division)

383

Thermal Runaway Characterization of Li-Ion Batteries Under External Heating Conditions

S. Saxena, Y. Xing, and M. Pecht (CALCE, University of Maryland College Park)

384

Oxygen Evolution and Phase Transformation in LiCoO₂ Cathode: A Phase-Field Modeling Study

V. Yurkiv, S. Sharifi-Asl, A. Ramasubramanian, R. Shahbazian-Yassar, and F. Mashayek (University of Illinois at Chicago)

385

Develop a Facil Syntheis Process for Si-Alloy Anode Material for Li-Ion Batteries (Cancelled)

386

Origin of the Self-Limited Energy Density of Oxide Cathode Materials for Li-Ion Batteries

S. H. Wei (Beijing Computational Science Reseach Center) and P. Zhang (Beijing Computational Science Research Center)

387

Three-Dimensional Electric Micro-Grid Network for High-Energy-Density Lithium-Ion Battery Cathodes

N. Zettsu (Department of Materials Chemistry, Shinshu University), D. W. Kim (Shinshu University), and K. Teshima (Department of Materials Chemistry, Shinshu University)

388

Improvement of Specific Capacitance in Lithium Ion Batteries By Mesoporous Carbon Hybrid Nanostructures (Cancelled)

389

Characterization and Modelling of an Physico-Chemical Impedance Battery Model Based on the Tesla Model S Cell with the Help of Half-Cell Measurements

F. E. Hust, H. Witzenhausen, P. Shafiei Sabet (RWTH Aachen University - ISEA), A. Warnecke (Jülich Aachen Research Alliance, JARA-Energy), and D. U. Sauer (RWTH Aachen University - ISEA)

390

Silicon Nanowire Cocooned in Graphene like Carbon with One-Dimensional Si Anode for Lithium-Ion Battery (Cancelled)

391

Alginate Based Binder Materials for High Capacity Silicon Anodes

T. Mokkelbost (SINTEF Materials and Chemistry), N. P. Wagner, A. Tøndervik, J. R. Tolchard (SINTEF Industry), E. Sheridan (SINTEF Materials and Chemistry), J. P. Mæhlen (Institute for Energy Technology), J. Voje (Elkem Technology AS), T. Helgerud (FMC Biopolymer AS), and A. M. Svensson (Norwegian University of Science and Technology)

392

Role of Solution Chemistry in Composition of Lithium-Ion Battery Precursors

G. Koenig, H. Dong, A. Barron, and A. Wang (University of Virginia)

393

Lithium Oxalate As Capacity Enhancer in LiMn_1.5Ni_0.5O₄/Graphite and LiMn_1.5Ni_0.5O₄/Si:G Full Cells

S. Solchenbach (Technical University of Munich), M. Wetjen (Technical University of Munich, Chemistry department), D. Pritzl (Technical University of Munich), and H. A. Gasteiger (Technical University of Munich, Chemistry department)

394

A Study of Esters As Co-Solvents in Lithium-Ion Batteries

X. Ma (Dalhousie University, Halifax, Canada), R. Senthil Arumugam, S. Glazier (Dalhousie University), L. Ma (Dept. of Chemistry, Dalhousie University), J. Xia (Dep. of Physics, Dalhousie University), and J. R. Dahn (Dalhousie University)

395

Considerations in Electrode Prepartion of Si-Based Slurries for Comercial Li-Ion Batteries

K. A. Hays (Oakridge National Lab), G. M. Veith (Oak Ridge National Laboratory), B. Key (JCESR at Argonne National Laboratory), J. Li, Y. Sheng (Oak Ridge National Laboratory), and D. L. Wood III (University of Tennessee)

396

Large Lithium Storage of Hydrothermally Synthesized TiNb₂O₇ Particles

K. Ise, F. Tejima, S. Morimoto, Y. Harada, and N. Takami (Corporate Research & Development Center, Toshiba Corp.)

397

Virtual Design of Thick Electrodes for Li-Ion Batteries

T. Danner (Helmholtz-Institute Ulm (HIU), German Aerospace Center (DLR)), S. Hein (Helmholtz Institute Ulm (HIU), German Aerospace Center (DLR)), D. Westhoff (Institute of Stochastics, University of Ulm), W. Haselrieder (Institute for Particle Technology, TU Braunschweig), V. Schmidt (Institute of Stochastics, University of Ulm), A. Kwade (Institute for Particle Technology, TU Braunschweig), and A. Latz (Institute of Electrochemistry, University of Ulm, German Aerospace Center (DLR))

398

Single-Frequency Battery State-of-Health Diagnostic for LiFePO4 Cells in 4P1S Array

B. Huhman (US Naval Research Laboratory)

399

Comparisons of Ageing and Temperature Impacts on Nonlinear and Linear Dynamic Responses of Lithium-Ion Batteries

N. Harting, N. Wolff, F. Röder, and U. Krewer (Inst. of Energy & Process Systems Eng., TU Braunschweig, Battery LabFactory Braunschweig)

400

Ageing Induced Changes in a Lithium-Ion Battery Analysed By Correlating EIS Simulations and Experiments

N. Wolff (Inst. of Energy & Process Systems Eng., TU Braunschweig, Battery LabFactory), M. Heinrich (Physikalisch-Technische Bundesanstalt, Inst. of Energy & Process Systems Eng., TU Braunschweig), F. Röder (Inst. of Energy & Process Systems Eng., TU Braunschweig, Battery LabFactory Braunschweig), S. Seitz (Physikalisch-Technische Bundesanstalt), and U. Krewer (Inst. of Energy & Process Systems Eng., TU Braunschweig, Battery LabFactory Braunschweig)

401

Investigation of an Automotive Battery Pack Cell

C. Rahe (HI MS, IEK-12, Forschungszentrum Jülich), E. Figgemeier, and D. U. Sauer (HI MS, IEK-12, Forschungszentrum Jülich, RWTH Aachen University, ISEA)

402

Morphology Impact By Graphite Variations on Silicon-Alloy Negative Electrodes for Lithium-Ion-Batteries

L. K. Becker (RWTH Aachen University, ISEA), E. Figgemeier, and D. U. Sauer (RWTH Aachen University, ISEA, HI MS, IEK-12, Forschungszentrum Jülich)

403

Highly Efficient Gel Polymer Electrolyte Operating at Room Temperature for All Solid State Battery Applications

G. Piana, V. Armel (Univ. Grenoble Alpes, CEA LETI, DCOS, LMBE, 38000 Grenoble), S. Franger, J. M. Duffault (ICMMO-ERIEE, UMR CNRS-UPS 8182, Université Paris Sud), and H. Porthault (Univ. Grenoble Alpes, 38000 Grenoble, France)

404

High Energy Lithium-Ion Battery Using Substituted LiCoPO₄

D. Liu, C. Kim, M. Cho, A. Guerfi (Research Institute of Hydro-Quebec (IREQ)), S. A. Delp, J. L. Allen, T. R. Jow (U.S. Army Research Laboratory), and K. Zaghib (Research Institute of Hydro-Quebec (IREQ))

405

Functionalized Polysiloxane Binders Towards the Better Performance of the Silicon Anode of Lithium-Ion Batteries

B. Hu, J. Zhang, S. Zhang (Argonne National Laboratory), Z. Zhang (Chemical Sciences and Engineering Division), and L. Zhang (Argonne National Laboratory)

406

The Influence of Surface Morphology of Copper Foils on the Efficiency of Lithium Ion Batteries (Cancelled)

407

Nanocrystalline LiCo_0.8Fe_0.2PO₄ / Multi-Walled Carbon Nanotubes Positive Electrode for 5-Volts Class Lithium Ion Batteries

N. Okita, K. Kisu, Y. Sakai, Y. Lim, Y. Takami (Tokyo University of Agriculture & Technology), T. Brousse (RS2E FR CNRS 3459), P. Rozier (CIRIMAT-CNRS, University of Toulouse III Paul Sabatier), P. Simon (CIRIMAT, UMR CNRS 5085), W. Naoi (K & W Inc), and K. Naoi (Tokyo University of Agriculture & Technology)

408

Mechanical Deformation-Assisted Alkaline Etching for High Performance Porous Silicon As a Lithium Storage Anode

M. Sohn, H. I. Park, D. G. Lee, and H. Kim (Hanyang University)